Model Railways - Latest Items

Updated daily, these are models where we have recently received fresh stock.
A good model of the 14-ton oil tank wagon from the steam era. This model carries the livery of blended motor fuel specialists National Mobil.
£25.95
Warehouse: 7
Stroud: 1
Fast delivery from Warehouse.
(Product Ref 71369)
£25.95
Warehouse: 7
Stroud: 1Next Warehouse Delivery: Nov 19
Fast delivery from Warehouse.
(Product Ref 48381)
An excellent model of the Southern design box van with plywood sides and the distinctive roof shape.

Era 4

£25.95
Warehouse: 4
Next Warehouse Delivery: Nov 19
Fast delivery from Warehouse.
(Product Ref 37483)
Detailed N gauge model of the BR Eastern region class 55 Deltic express passenger diesel locomotive 50015 Tulyar finished in BR blue livery with white window surrounds.
Retooled model with a new body shell designed using 3D scanned data, these intricately executed locomotives also feature a powerful six-axle drive mechanism with twin flywheel and motor, 6 pin decoder socket, bi-directional lighting, single or double windscreen wipers and etched fan grilles.
£123.20
MRP £144.95
Warehouse: 1
Next Warehouse Delivery: Nov 19
Fast delivery from Warehouse.
(Product Ref 52419)
Bachmann 6-Pin Right-Angle DCC Locomotive Decoder 2 Functions 36-556RA
Bachmanns 36-556RA decoder is a Soundtraxx product fitted with a 6-pin plug-in connector mounted at right angles to the decoder board and projecting at one end. This allows the chassis designers a much wider choice of mounting locations, for example the decoder can be fitted vertically inside the cab of a steam locomotive.

Based on the high quality and highly capable Soundtraxx MC1 decoder a wide range of user configurable CVs allow the decoder to be tuned and matched to most model railway locomotive motors. A continuous rating of 1 amp is available, making the decoder suitable for N, OO/HO and even small O gauge locomotives. Two function outputs are available with a 100mA maximum load on each.

Supports 14, 28 and 128 speed steps with back EMF regulation and 15.6kHz PWM speed control, short and long (extended) addressing, advanced consist addressing (for double-heading and multiple units) , adjustable acceleration/deceleration rates. The decoder has 15 pre-set speed curves, allowing fine control speed ranges to be adjusted and supports user-defined speed curves with 28 reference points.
£17.95
Warehouse: 6
Gloucester: 1, Stroud: 2
Fast delivery from Warehouse.
(Product Ref 77473)
Kit to build a detailed model of the first design of BR box van intended for loading with palletised goods. Although these vans are well remembered due to their distinctive off-set doors the design was less than successful in service.
Supplied with metal wheels, 3 link couplings and sprung buffers

£36.00
MRP £38.00
Warehouse: 1
Fast delivery from Warehouse.
(Product Ref 56574)
Slaters Plastikard 7071 O Gauge BR 13Ton High Sided Open Wagon
Kit to build a model of the BR steel bodied merchandise open wagon.
Originally an LNER design these wagons were adopted as the standard BR merchandise open wagon. The steel body was much more durable than wood planks and lashing rings could be securely attached inside the body, easing the work of securing loads.
£31.00
MRP £34.00
Warehouse: 1
Fast delivery from Warehouse.
(Product Ref 53467)
Slaters Plastikard 7069  O Gauge BR Lowfit Wagon Dia1/002

Supplied with metal wheels, 3 link couplings and sprung buffers

£32.00
MRP £34.00
Warehouse: 1
Fast delivery from Warehouse.
(Product Ref 53466)
Model kit to build a detailed replica of the BR Vanwide box van in original vacuum brake configuration.
Supplied with metal wheels, 3 link couplings and sprung buffers
£36.00
MRP £38.00
Warehouse: 1
Fast delivery from Warehouse.
(Product Ref 37552)
DCC Concepts DCF-BR2 00 Gauge Bearing Reamer Pack

A great tune-up tool from DCC Concepts!

The bearing reamer set contains two reamers, one single-ended and one double-ended designed to clean up the moulded plastic bearing holes of RTR coaches and wagons and older kits with moulded plastic bearings. Fitting between the bearing sockets in place of the axle finger pressure can be applied to turn the reamer and cut a clean tapered bearing for pin-point axles. This cleans out any accumulated dirt/debris and corrects any faults with the moulded profile.
The reamers can also be used to make the bearing holes deeper, for example to allow standard length axles with recent finer-scale wheels to be fitted to Lima rolling stock, and dealing with any 'tight' axles.

£11.95
Warehouse: 3
Fast delivery from Warehouse.
(Product Ref 94585)
Back-to-back gauges are used to check that the wheels are correctly spaced apart. Adjust your wheels to the correct gauge settings for reliable operation though points.
14.5mm back-to-back is the measurement used for commercial ready-to-run models using tension lock couplings.
£15.00
Warehouse: 9
Fast delivery from Warehouse.
(Product Ref 73305)
DCC Concepts Rolling Road Active Set for N, OO/HO, TT/HOm and EM/P4 DCP101
The DCC Concepts multi-gauge rolling road offers the ability to test model locomotives for several track gauges. This is an ideal combination for railway modellers who operate models in several different scales, or models of both standard and narrow gauge trains.

Six roller units are supplied, carefully designed to sit on and take power from a section of track. The provision of six roller units allows locomotives with up to six driven axles to be tested. That covers all Co-Co diesel locomotives and up to 12-coupled steam locomotives! The rollers are separate units connected by a section of insulated channel section, cut to the correct length to maintain gauge. Thus the insulated sections can easily be changed for the alternative lengths, allowing 9mm (N, HOe and 009), 12mm (TT, HOm, HO3-1/2, OOn3), EM and P4 gauge models to be accomodated.
The DCC Concepts rolling roal is possibly the best and most flexible choice for railway modellers who own and operate models of different scales and gauges.

£79.99
Warehouse: 1
Fast delivery from Warehouse.
(Product Ref 85009)
Developed from the GWR 20-ton open wagon the BR 21-ton version was intended to be the standard coal wagon. The wagons never proved quite so popular with the domestic trade customers as the smaller 16-ton version and later hoppers too over many bulk coal flows. The 21-tonner remains a distinctive wagon of the early BR era, something different to the ubiquitous 16-ton minerals.
Parkside have a well deserved reputation for making excellent kits, producing an accurate model which remains easy to assemble well with only basic tools required.
Supplied with metal wheels and 3 link couplings.

£34.50
MRP £38.50
Warehouse: 1
Fast delivery from Warehouse.
(Product Ref 53710)

Introduced by the LNER in 1937, later examples had all-welded bodies. BR also built some and uprated their capacity to 22 tons. Lasted into the 1980s, mostly in engineer’s use. Transfers for LNER, early and post-TOPS BR.
Supplied with metal wheels and 3 link couplings.
Intended to carry steel sheet or plates many sheet steel components could also be carried. The wagons proved versatile in service and often saw use as flat wagons conveying road vehicles and farm implements.

£40.00
MRP £45.00
Warehouse: 1
Fast delivery from Warehouse.
(Product Ref 53707)
Model kit of the British Railways 12-ton capacity long wheelbase pipe wagon.
Designed to carry finished iron, steel and ceramic pipe sections for water/sewerage and drainage these long open wagons have found many more uses, with some being adapted with modern suspension and air brakes in the 1980s. This kit builds a model of one of the 350 wagons built in 1955 and fitted with vacuum brakes, these wagons being withdrawn from service through the 19070s and 80s.
The design was based on a LNER design and the kit can be modified to model the earlier design or many of the other batches of BR built wagons.
Supplied with transfers for early and later British Railways and TOPS era liveries.
Supplied with metal wheels and 3 link couplings.
£34.50
MRP £38.50
Warehouse: 1
Fast delivery from Warehouse.
(Product Ref 53706)
If you are a scratchbuilder or want to modify one of our N Gauge kits, this is range for you. Ratio's Builder range has been extended here to include all accessory packs from the Trackside range that you can use to this end. These Oil tanks can be used to extend the Oil Depot (ref 228) or as a stand alone feature. Footprint: 80mm x 25mm
£5.10
Warehouse: 1
Cardiff: 2, Plymouth: 1
Fast delivery from Warehouse.
(Product Ref 32228)
If you are a scratchbuilder or want to modify one of our N Gauge kits, this is range for you. Ratio's Builder range has been extended here to include all accessory packs from the Trackside range that you can use to this end. The Builder Series Material Sheet packs contain 4 sheets each 90mm x 75mm
£5.10
Warehouse: 2
Fast delivery from Warehouse.
(Product Ref 32226)
If you are a scratchbuilder or want to modify one of our N Gauge kits, this is range for you. Ratio's Builder range has been extended here to include all accessory packs from the Trackside range that you can use to this end.
The Builder Series Material Sheet packs contain 4 sheets each 90mm x 75mm
£5.10
Warehouse: 4
Bristol: 1, Gloucester: 1
Fast delivery from Warehouse.
(Product Ref 32215)