Antics Models, Diecast, Radio Control and Model Railways
  1. Antics Online Model Railways Power & Electrics Electric Point Control

Peco PL-11 Side Mounted Point Motor

Peco PL-11 Side Mounted Point Motor

This point motor is designed to mount alongside a point, avoiding the need to cut a hole into the baseboard to fit a motor below each point.
Fits directly to OO/HO points. Can be used with N points but due to the lower height track check that the point motor unit is clear of the passing trains.
£11.25
MRP £11.25
Warehouse: 7
Bristol: 2, Cardiff: 3, Gloucester: 3, Plymouth: 4, Stroud: 3
Fast delivery from Warehouse.
(Product Ref 64095)
Cookies are disabled.
To place an order please call 01453 377030
Have a question about this product? Let us know
Contact us
Have a question about this product? Let us know
Contact us
Related Products
Provides the short burst of current required to operate the PL-11 and PL-10 series of Turnout Motors. The PL-31 Connectors are ideal for attaching the PL-34 Wiring Looms or PL-38 wire to these switches without soldering; the included Shrouds prevent current 'shorting out' between the terminals.
Peco Passing Contact Switch Red Lever PL-26R
£9.75
Provides the short burst of current required to operate the PL-11 and PL-10 series of Turnout Motors. The PL-31 Connectors are ideal for attaching the PL-34 Wiring Looms or PL-38 wire to these switches without soldering; the included Shrouds prevent current 'shorting out' between the terminals.
Peco Passing Contact Switch White Lever PL-26W
£9.75
Provides the short burst of current required to operate the PL-11 and PL-10 series of Turnout Motors. The PL-31 Connectors are ideal for attaching the PL-34 Wiring Looms or PL-38 wire to these switches without soldering; the included Shrouds prevent current 'shorting out' between the terminals.
Peco Passing Contact Switch Black Lever PL-26B
£9.75
Provides the short burst of current required to operate the PL-11 and PL-10 series of Turnout Motors. The PL-31 Connectors are ideal for attaching the PL-34 Wiring Looms or PL-38 wire to these switches without soldering; the included Shrouds prevent current 'shorting out' between the terminals.
Peco Passing Contact Switch Yellow Lever PL-26Y
£9.75
A simple yet effective method of switching turnouts. The PL-18 Studs are inserted into the control panel, often laid out as a layout diagram. A wire is then soldered to the tag at the back, which goes to the relevant solenoid of the turnout motor. When power is applied by touching the powered PL-17 probe on the stud the Turnout Motor is activated.
Peco Probe for electrically operating Points PL-17
£6.60
A simple yet effective method of switching turnouts. The PL-18 Studs are inserted into the control panel, often laid out as a layout diagram. A wire is then soldered to the tag at the back, which goes to the relevant solenoid of the turnout motor. When power is applied by touching the powered PL-17 probe on the stud the Turnout Motor is activated.
Peco Studs and Tag Washers PL-18
£5.75