Dock & Shoreside

New for 2013! An intermediate-sized drydock for repair and maintenance of frigates, ice breakers and nuclear submarines of the Soviet and Russian navies through the cold war and beyond. The model includes two different cranes and is fitted with warning notice decals. See also the larger PD-50 dock modelled by Coastlines. The full-hull submarine is not included with this model but similar submarines are made by Mountford and can be purchased from Antics.

A 1/1200 scale resin dock wall for replacement of one side of a Triang floating drydock. The photograph shows the unpainted drydock wall in situ on a grey drydock.

Container stacks for Panamax Container Ship models in 1/1250 and 1/1200 scale. The unpainted polyurethane castingsare by Coastlines Models CL-0010.

These container stack models have been designed to provide a load for any vessel that could pass through the 20th Century Panama Canal. See photograph.

New for 2013! A traditional-style motor yacht from the 1950s onwards.

A typical quayside attraction in a marina.

the  basic master was produced by Kelvin Holmes and Mountford have done  additional detail work and  added certain features including brass photo etch parts and metal castings for the cranes. There is some  detailed brass photo etch involved and a highly detailed  resin casting for the superstructure.

Floating dry docks, particularly those used to service ballistic missile submarines, offer obvious strategic advantages. The USS Los Alamos was based at Holy Loch in Scotland from 1961 until struck from service in 1994, servicing US submarines and performing a hardly noticed but very important duty at that highly secret base. In a somewhat different form the dock is still in use today, back in the USA.

The  basic master was produced by Terry Holtham and Mountford have done  additional detail work and  added certain features including brass photo etch parts and metal castings for the cranes. Brass photoetched parts and a highly detailed resin casting for the superstructure has produced an interesting and well presented model that can be put straight on display.

A 1/1200 scale unpainted resin replacement base designed to fit original Triang floating drydock walls, see photograph with one grey side wall in place.

A set of 6 correctly shaped and coloured buoys in different sizes to guide your ships to port.

A set of 6, three of each, Port & Starboard Buoys. Was it Isolationism that resulted in the channel markers being oppositely colored?

This pattern of mooring buoy seems to have been preferred in and around the Solent and the Portsmouth Naval Base. Six in a pack.

Modelled on the buoys used around Devonport Naval Base, Plymouth and off Dartmouth. Six in a pack.

PD-50, the largest floating drydock in the world, belongs to the Russian Navy but was built in Sweden. Designed to dock the Kiev-class carriers, it is big enough to lift Kusnetsov out of the water for graving and maintenance. The model is fitted with warning sign decals and includes two removeable 100t cranes. The full-hull submarine models are not included with this model but Mountford make similar submarines and these can be purchased from Antics.
This model can be made to order.

New for 2012! A floating drydock trimmed down and ready to receive waterline ship models.

The ferry quay at Leknes is the subject of this 1/1200 scale waterline model.It has been cast in resin by Coastlines Models  from one of a series of small wooden dioramas designed and built by John Mitchell and the late Sandy Feather to display a collection of 1/1200 and 1/1250 scale waterline ship models in realistic settings.

Ferry berths in the Canary Islands are protected by an artificial breakwater. This model is based on a pair of such berths in the Canary Islands where there are several examples. This 1/1250 scale waterline model has been produced by Coastlines models, CL-LA10.

This Freeport quay is the third of a series of five miniature dioramas devised by Sandy Feather and John Mitchen for collectors of miniature ship models who claimed that they had no space to display their ship collection in a realistic setting.. The Coastlines CL-LA11 model is a waterline resin caating with three buildings on the quay

This ferry terminal is based on a quayside inside the sea-lock at Tilbury Docks on the River Thames. It is a 1/1250 scale resin model with a shallow quay protected from flooding by a sea-lock by Coastlines Models, CL-LA12

A replica made in resin and hand-painted of the original Triang model from the 1960s made by kind permission and with the assistance of Triang Minic Ships Ltd. The plinth is painted in the stone colour of real statue, rather than the original grey of the diecast model, for added realism.