Wills Lineside Kits

Model of a Victorian style cast iron bridge, designed to be used with the SS64 abutments kit. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model.
Span: 110mm

Underpass for single track to be used by farm and light traffic; stone abutments included. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model.
Span 70mm

Underpass for double track to be used by farm and light traffic; stone abutments included. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model.
Span 70mm

Used to allow cattle or storm water to pass through an embankment. Pack of 2. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model.
Footprint: 64mm x 60mm plus wing walls.

A single track Bow Plate Girder Bridge, includes stone abutments. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model.
Footprint: 203mm x 63mm

A single track Decked Girder Bridge, includes stone abutments.Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model.
Footprint: 205mm x 67mm

This Plate Girder Bridge kit can be made up to suit the length of span required, and is therefore particularly useful where roads/ railways cross at an angle other than 90 degrees or where a long bridge is required.
Maximum girder length 352mm.
Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model.

A pair of abutments with 4 wing walls. Designed for use with the SS57 Vari Girder kit, LK-10 and 11 Girder Bridge sides and the SS26 Victorian style bridge but suitable for any bridge project. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model.
Footprint: 202mm x 96mm

Often seen with business premises in them, these Brick Retaining Arches measure 494mm long x 100mm high. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model.

This kit contains parts to build two piers and three arches. The finely moulded parts represent typical stone courses so commonly found on such a structure. Also, as per the prototype, the brick courses of the underside section of the arch are accurately moulded. All parts come ready-coloured in appropriate stone buff (to match the Wills Materials Pack SSMP200) and brick red.

The complexities of modern signalling systems often requires a larger building to house the equipment required to connect, work and monitor junctions and level crossings than the familiar aluminium lineside cabinets.
This kit makes one of the semi-portable buildings now favoured by railway companies, as the equipment can be prepared, installed and tested at workshops. The building can then moved to site and quickly connected up as part of a larger planned line maintenance closure.
These units are also used as temporary staff mess rooms and workshops close to work sites on longer projects.

Ideal for bringing a road or path over a small river or canal. The Wills scenic series provides a range of simple to make kits that help to change your layout into a model railway that contains real life detail. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Height 68mm.

Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model.
This kit includes:
• 8 135mm long Stone Wall sections
• 4 139mm long Capping Stone sections
• 8 Pillar/Corner trims

This scrapyard kit includes a stone shack and some ready made scrap.Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model.
Footprint: 98mm x 46mm

A useful kit producing a line of timber storage shelters. These simple structures were used to keep timber dry in storage. This structure is an ideal base structure for a timber or builders' merchants business, which could be served by a railway siding, or situated adjacent to a railway goods yard. Many coal merchants diversified into building material supply, keeping their wagons busy collecting timber, bricks and aggregates through the summer when coal demand was low.
131 x 70mm

Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model.
This kit includes:
• 15 39mm wide Fence Panels including post
• 5 13mm wide Gates including post plus 10 additional posts.

Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model.
This kit includes:
• 20 26mm wide Fence Panels including post
• 4 12mm wide Gates including post plus 8 additional posts.

Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model.
This kit includes:
• 864mm of Rustic Fencing
• 1272mm of Picket Fencing

This single track crossing features one of the many different types of gates used where roads had to cross the railway on the level. Kit includes 1 pair of gates 95mm x 17mm, plastic cobblestone roadway and a planked crossing deck.Don't forget the crossing keepers box (SS29), Signal Box (SS48), or Cottage (SS39). Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model.

This kit includes 2 each of: Running in boards, chocolate machines, trolleys, sack trucks plus a selection of station signs. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model.

This model can be used to add interest to a rural scene; also useful for wargamers. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model.
Footprint: 57mm x 49mm

A typical rural bus shelter to add interest to a village or small town scene. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Footprint: 52mm x 35mm.

Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model.
This kit contains:
• 8 79mm long straight pavement sections
• 2 corner units

Ideal for detailing your river scenes these parts have been manufactured for Wills' Watermill kit, CK22. The waterwheel can be used to provide power any substantial riverside building, or simply left, abandoned. Many old waterwheels can be seen around the UK, sometimes left in place long after the mill they served had fallen into disrepair or even been demolished!

Sluice Gates are found all over the British waterways network, controlling the water levels in rivers and ponds, allowing water flow into irrigation channels and alongside canals to allow the cut to be drained for repairs.

Kit out your forge building with these white metal parts - horse, farrier, grinding wheel and assorted tools. The Wills scenic series provides a range of simple to make kits that help to change your layout into a model railway that contains real life detail.

Supplied in white metal, these detailing packs offer an interesting addition to your buidings and scenes. Some assembly is required and painting is necessary.

White Metal parts to depict a workshop include a lathe, pillar drill,, work bench, electric motor with belt drive system and 3 workmen. The Wills scenic series provides a range of simple to make kits that help to change your layout into a model railway that contains real life detail.

Supplied in white metal, these detailing packs offer an interesting addition to your buidings and scenes. Some assembly is required and painting is necessary.

Known to railwaymen as location cabinets these silver boxes are used to house electrical equipment, ranging from lineside telephones to track circuit and signal relays and the control systems for automatic crossings.

Set 1 includes one double door and one small post-mounted cabinet.

Until now the connection between the signal box and turnout has remained mysteriously invisible, but with these new items from Wills replicating the real thing has become a possibility. The subject of point rodding can be a complex one, but the kits break down everything into the various components needed, and allows a wide variety of configurations to be created suitable for specific track plans.
 
Kit SS89 contains:

• 14 crank bases (choice of 3 heights)
• 8 assorted crank arms
• 2 compensators
• 2 complete facing point locks with deflector ramps
• over one metre of square section rodding with moulded-in supports

Kit SS90 is an extension kit, containing another two metres or so of square section rodding with supports. The parts should be glued together using a proprietary liquid poly cement, and the whole assembly is best fixed to the baseboard using an impact adhesive BEFORE ballasting the track. Although moulded in grey plastic, which represents the galvanised steel of the prototype, the modeller can add a little weathering to help it blend into the scene. The packaging includes a comprehensive set of assembly notes to help the modeller achieve a realistic model of this common prototype.

Until now the connection between the signal box and turnout has remained mysteriously invisible, but with these new items from Wills replicating the real thing has become a possibility. The subject of point rodding can be a complex one, but the kits break down everything into the various components needed, and allows a wide variety of configurations to be created suitable for specific track plans.

Kit SS90 is an extension pack, containing another 2000mm (78in) of square section rodding with supports. Use with pack SS89 which contains a selection of cranks and compensators to complete the control rod runs.

The parts should be glued together using a proprietary liquid poly cement, and the whole assembly is best fixed to the baseboard using an impact adhesive BEFORE ballasting the track. Although moulded in grey plastic, which represents the galvanised steel of the prototype, the modeller can add a little weathering to help it blend into the scene.

Modern style palisade fencing as found today around secure compounds, electricity sub-stations etc. and now erected alongside the railway in many built-up areas with a high frequency of trespass and fencing damage in the past.
This Wills product replicates the character of the design, right down to the three-pronged tip at the top of the paling.
Two kits available, this one with plain fencing lengths and two styles of gate. A separate set of plain fencing panels is also available. All parts are moulded in grey plastic to represent unpainted, galvanised metal, but can be painted to reproduce fencing which has been blended into the local environment to reduce its visual impact.

Fencing length 1460mm (57in) plus 4 gates.

Modern style palisade fencing as found today around secure compounds, electricity sub-stations etc. and now erected alongside the railway in many built-up areas with a high frequency of trespass and fencing damage in the past.
This Wills product replicates the character of the design, right down to the three-pronged tip at the top of the paling.
Two kits available, this one with several plain fencing panel for lineside fencing. A separate kit includes access gates suitable for recreating secure compounds. All parts are moulded in grey plastic to represent unpainted, galvanised metal, but can be painted to reproduce fencing which has been blended into the local environment to reduce its visual impact.

Fencing length 1460mm (57in)

Wills Kits are moulded plastic which can easily be adapted to fit many locations and provides for easy modification to different styles of gates etc. This modern level crossing set is under development, but is planned to include four level crossing warning flasher units, road traffic warning signs and four barrier gates with mechanism boxes, arms and full skirts (all non-working).

The set can obviously be quickly modified to singe gate format for narrow country lanes and no doubt the skirts could be cut away for barrier arm only type crossings installed where pedestrian traffic is not expected.

CCTV cameras are used to monitor railway level crossings, allowing signallers to quickly check that the crossing gates are working and spot any obstructions of the railway, like vehicles becoming trapped between the gates. The cameras and lighting (often infra-red to avoid nuisance to nearby houses) for nighttime observation are mounted on tall and substantial posts, protecting them from vandalism and able to resist collisions from road vehicles.

Wills OO Gauge SSM322 DPD Distribution Depot Building Kit
Building Footprint

Stand alone building : 168 x 168mm (6 5/8in square)

Low relief structure : up to 336mm length x 84mm width (13 1/4in x 3 5/16in)

DPD Ford Transit and Securtiy Fences not Included

Manned security gates are a feature of many large complexes, from factories and trading estates to ports and government/military depots. The gates provide for both the control of entry to persons having business inside and to ensure visitors and delivery drivers are checked in and directed to their destinations.
This set comprises a pair of barriers, open and closed, plus floodlights, CCTV and palisade fencing to match Wills SSM316/7. Using pre-coloured moulded plastic parts the kit is easy to build, and further painting along with some bushes and undergrowth along the fence line will enhance the model.

This classic Brick Arch Bridge can easily be made into a multiple arch structure with additional kits. Footprint 133mm x 70mm, (180mm x 190mm including wing walls). Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model.

Often seen with business premises in them, these Stone Retaining Arches measure 494mm long x 90mm high. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model.

Railways were one of the first users of the new electrical technology and telegraph, first with overhead cabling, then with ground level cabling, often protected within a pre-cast concrete trunking.

Today almost every major line in Britain has one of these concrete trunking running alongside it, carrying the cabling to connect, power and control signals and telephones.

Street traders use these type of stalls to sell a whole range of produce from fruit and vegetables through to clothing and household goods. 2 carts in each pack. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model.
Footprint: 41mm x 21mm each.

Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model.
This kit includes:
• 20 24mm wide Concrete Fencing panels including post
• 20 22mm wide Ornate Concrete Fencing panels including post
• 20 22mm wide Concrete Balustrade Fencing panels including post
• 20 22mm wide Concrete Post and Rail panels including post
• 8 24mm wide Double Gates including 2 posts
• 8 14mm wide Single Gates Including 2 posts

Scratch and Kit builders accessory pack.This kit includes sufficient parts to construct parapet bridge walls for a single track overbridge 131mm Long including capping stones and end piers. Easily extended using additional kits. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model.

This single track Tunnel Mouth is 133mm wide x 108mm high; total footprint is 180mm x 72mm including wing walls. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model.

Wills structure kits are suitable for use on all UK model layouts representing the 1930s up to the 1960s and beyond, many of these types of buildings are still in existence today. The design are copied from real life, giving you the option to model a real situation or, if you prefer, use them in a fictional setting. The range includes domestic and commercial kits to help you bring to life the landscape through which your model railway runs.

Use one of the many kits in the Scenic series to give an added edge of realism to your model railway layout. They have moulded pre-coloured plasic parts that only require gluing together. Painting is optional, but will help make your kits look even more realistic.

Additional piers for the SS80 Viaduct kit; can also be used with the Vari Girder (Ref. SS57), Bow (Ref. SS47), Plate (Ref. LK-10) and Truss (Ref. LK-11) Girder Bridge sides to construct a wide variety of ubiquitous viaducts. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Height 165mm, width 34mm each

Kit includes 2 large hoardings plus 3 smaller ones, Bill Stickers himself plus ladder and paste bucket, plus a sheet of 40 posters. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model.
Footprint 58mm x 32mm each.

A model of a fixed height derrick type jib crane, usually hand worked. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model.
Footprint 81mm x 21mm.

Add interest to your village centre with these generic structures. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. footprint: 76mm x 59mm.

Wills structure kits are suitable for use on all UK model layouts representing the 1930s up to the 1960s and beyond, many of these types of buildings are still in existence today. The design are copied from real life, giving you the option to model a real situation or, if you prefer, use them in a fictional setting. The range includes domestic and commercial kits to help you bring to life the landscape through which your model railway runs. 

Supplied in white metal, these detailing packs offer an interesting addition to your buidings and scenes. Some assembly is required and painting is necessary.

Useful for extending the SSM318 to cross more tracks, or for making your own Occupation or Level Crossing