01453 377030
info@anticsonline.uk
Antics Models, Diecast, Radio Control and Model Railways
Antics Online Model Shops and Hobby Stores >> Model Railways >> Power & Electrics >> Transformer/Controllers

Transformer/Controllers

12-volt Analogue DC train controllers for N, OO/HO and O gauge model railways.
Hornby R8012 HM2000 Twin Controller Transformer
Recommended for expanding model railwaysHornby HM2000 Twin Controller Transformer R8012
More Info
Recommended for expanding model railways
Hornby HM2000 Twin Controller Transformer R8012

£129.99
MRP £145.25
Warehouse: 3
Bristol: 1, Cardiff: 1, Gloucester: 1, Plymouth: 1, Stroud: 1
Fast delivery from Warehouse.
(Product Ref 1286)
Cookies are disabled.
To place an order please call 01453 377030
Hornby P9000 UK Mains AC Adaptor for Hornby Controllers
Hornby P9000 UK Mains 220-240V 50-60Hz Transformer.Replacement transformer suitable for R8250 Train Controller
More Info

Hornby P9000 UK Mains 220-240V 50-60Hz Transformer.

Replacement transformer suitable for R8250 Train Controller

£27.75
Warehouse: 2
Fast delivery from Warehouse.
(Product Ref 38314)
Cookies are disabled.
To place an order please call 01453 377030
Peco PL-202 12V DC Power Supply Unit
12volt DC UK plug-top power supply with maximum 2amp output capacity. Supplied with 2-pin terminal block attached to outpur cable suitable for Peco turntable motorisation kit and SmartSwitch point servo motors.
More Info
12volt DC UK plug-top power supply with maximum 2amp output capacity. Supplied with 2-pin terminal block attached to outpur cable suitable for Peco turntable motorisation kit and SmartSwitch point servo motors.
£17.60
Warehouse: 5
Fast delivery from Warehouse.
(Product Ref 101724)
Cookies are disabled.
To place an order please call 01453 377030
Hornby R7229BL Single Track Train Controller with Accessory Output with Power Supply
Single track train speed controller with accessory power supply output.An alternative to the R8250 Controller, the Analogue Train and Accessory Controller features an improved casing and an additional uncontrolled DC output with integral capacitor discharge unit (CDU) to support solenoid point motors. The Auxiliary output can also be used to power lighting on the layout up to a current of 150mA. A recessed reduction switch also limits the output to reduce loco speed.Supplied with Hornby P9000 UK plug-top mains transformer power supply.
More Info
Single track train speed controller with accessory power supply output.
An alternative to the R8250 Controller, the Analogue Train and Accessory Controller features an improved casing and an additional uncontrolled DC output with integral capacitor discharge unit (CDU) to support solenoid point motors. The Auxiliary output can also be used to power lighting on the layout up to a current of 150mA. A recessed reduction switch also limits the output to reduce loco speed.
Supplied with Hornby P9000 UK plug-top mains transformer power supply.
£46.99

Gloucester: 1, Plymouth: 1, Stroud: 1
Delivery from stores takes a few days longer!
(Product Ref 107645)
Cookies are disabled.
To place an order please call 01453 377030
Bachmann 36-565 12v Power Controller with Transformer
Bachmann 12v Power Controller with Transformer 36-565Recommended single-track train controller. An ideal choice when adding a second track to a basic trainset circle.oval, this 12-volt DC single track controller, analogue, is supplied with a plug-top mains power transformer and track power connector for OO track. For N gauge track we suggest using the Peco ST-9 power connector.
More Info
Bachmann 12v Power Controller with Transformer 36-565
Recommended single-track train controller. An ideal choice when adding a second track to a basic trainset circle.oval, this 12-volt DC single track controller, analogue, is supplied with a plug-top mains power transformer and track power connector for OO track. For N gauge track we suggest using the Peco ST-9 power connector.
£49.95
MRP £54.95

Bristol: 1, Cardiff: 2, Gloucester: 2, Plymouth: 2, Stroud: 1
Delivery from stores takes a few days longer!
(Product Ref 48433)
Cookies are disabled.
To place an order please call 01453 377030
Gaugemaster WS Model WS - Walkabout Unit with Inertia
Gaugemaster Model WS - Walkabout Unit with Inertia WSSingle Track Walkabout Controller with simulation for ‘N’, ‘OO’ and most small GaugesInput: 1 x 16v A.C. at 1.25 amps Requires T1, M1 Transformer, or 100M Controller��Output: 1 x 12v D.C. at 1 amp controlledMeasurements: 109mm x 59mm x 20mm deepFitted with 1.5 metres of 4 core cable.
More Info
Gaugemaster Model WS - Walkabout Unit with Inertia WS
Single Track Walkabout Controller with simulation for ‘N’, ‘OO’ and most small Gauges
Input: 1 x 16v A.C. at 1.25 amps Requires T1, M1 Transformer, or 100M Controller��
Output: 1 x 12v D.C. at 1 amp controlled
Measurements: 109mm x 59mm x 20mm deep
Fitted with 1.5 metres of 4 core cable.
£59.95

Cardiff: 1
Delivery from stores takes a few days longer!
(Product Ref 45359)
Cookies are disabled.
To place an order please call 01453 377030
Bachmann 36-611 Track Power Connector Lead OO
Track power supply lead for use with Bachmann 36-560/36-565 DC and DCC EZ-Command / Dynamis controllers and Bachmann track power connector clip.
More Info
Track power supply lead for use with Bachmann 36-560/36-565 DC and DCC EZ-Command / Dynamis controllers and Bachmann track power connector clip.
£4.95

Gloucester: 1
Delivery from stores takes a few days longer!
(Product Ref 109641)
Cookies are disabled.
To place an order please call 01453 377030
Gaugemaster COMBI Model Combi Single Track Train Controller
Gaugemaster Model Combi Single Track Train Controller COMBIAn uncomplicated handset style controller which comes complete with a separate, dedicated transformer plugging directly into a wall socket with a 1.8m lead to plug into the controller.
More Info
Gaugemaster Model Combi Single Track Train Controller COMBI
An uncomplicated handset style controller which comes complete with a separate, dedicated transformer plugging directly into a wall socket with a 1.8m lead to plug into the controller.

£42.50
MRP £47.50

Cardiff: 1
Must be ordered - delivery as soon as possible.
(Product Ref 34385)
Cookies are disabled.
To place an order please call 01453 377030
Gaugemaster GMC-Q Model Q - Four Track Controller
Four Track Transformer Controller for N, OO and most small GaugesInput: Mains (240v A.C.) use 3amp fuseOutput: 4 x 12v D.C. at 1 amp each controlled2 x 16v A.C. at 1 amp for accessories2 x 12v D.C. at 1 amp uncontrolled for accessoriesMeasurements: 208mm x 90mm x 147mm deep
More Info
Four Track Transformer Controller for N, OO and most small Gauges
Input: Mains (240v A.C.) use 3amp fuse
Output: 4 x 12v D.C. at 1 amp each controlled
2 x 16v A.C. at 1 amp for accessories
2 x 12v D.C. at 1 amp uncontrolled for accessories
Measurements: 208mm x 90mm x 147mm deep
£235.00

Must be ordered - delivery as soon as possible.
(Product Ref 29992)
Cookies are disabled.
To place an order please call 01453 377030
Gaugemaster 100M Model 100M - Single Controller 12v DC 16v AC 1 amp
Single Track Transformer Controller for ‘N’, ‘OO’ and most small GaugesInput: Mains (240 volts A.C.) use 3 amp fuseOutput: 1 x 12v D.C. at 1 amp uncontrolled for accessories1 x 12v D.C. controlled at 1 amp1 x 16v A.C. at 1 amp for accessories1 x 16v A.C. DIN Socket for Gaugemaster handheld units (HH,W and WS)Measurements: 148mm x 90mm x 125mm deep
More Info
Single Track Transformer Controller for ‘N’, ‘OO’ and most small Gauges
Input: Mains (240 volts A.C.) use 3 amp fuse
Output: 1 x 12v D.C. at 1 amp uncontrolled for accessories
1 x 12v D.C. controlled at 1 amp
1 x 16v A.C. at 1 amp for accessories
1 x 16v A.C. DIN Socket for Gaugemaster handheld units (HH,W and WS)
Measurements: 148mm x 90mm x 125mm deep
£94.95

Must be ordered - delivery as soon as possible.
(Product Ref 33980)
Cookies are disabled.
To place an order please call 01453 377030
Gaugemaster D Model D Twin Track Controller
Gaugemaster Model D Twin Track Controller DGood general purpose twin track Transformer/Controller for N, OO and most small gauge layouts.Input: Mains 240v AC - use 3 amp fuseOutput: 2 x 12v DC at 1 amp each controlled1 x 16v AC at 1 amp for accessories1 x 12v DC at 1 amp uncontrolled for accessoriesMeasurements: 148mm x 90mm x 125mm deep.
More Info
Gaugemaster Model D Twin Track Controller D
Good general purpose twin track Transformer/Controller for N, OO and most small gauge layouts.
Input: Mains 240v AC - use 3 amp fuse
Output: 2 x 12v DC at 1 amp each controlled
1 x 16v AC at 1 amp for accessories
1 x 12v DC at 1 amp uncontrolled for accessories
Measurements: 148mm x 90mm x 125mm deep.
£115.00
MRP £130.00

Must be ordered - delivery as soon as possible.
(Product Ref 24100)
Cookies are disabled.
To place an order please call 01453 377030
Gaugemaster 100MO Model 100MO - Single Track O Gauge Controller
Gaugemaster Model 100MO - Single Track O Gauge Controller 100MOSingle Track Transformer Controller for a O Gauge LayoutInput: Mains (240 volts A.C.) use 3 amp fuseOutput: 1 x 12v D.C. at 1 amp uncontrolled for accessories1 x 12v D.C. controlled at 2.5 amp1 x 16v A.C. at 1 amp for accessoriesMeasurements: 148mm x 90mm x 125mm deep
More Info
Gaugemaster Model 100MO - Single Track O Gauge Controller 100MO
Single Track Transformer Controller for a O Gauge Layout
Input: Mains (240 volts A.C.) use 3 amp fuse
Output: 1 x 12v D.C. at 1 amp uncontrolled for accessories
1 x 12v D.C. controlled at 2.5 amp
1 x 16v A.C. at 1 amp for accessories
Measurements: 148mm x 90mm x 125mm deep
£110.00
MRP £125.00

Must be ordered - delivery as soon as possible.
(Product Ref 45376)
Cookies are disabled.
To place an order please call 01453 377030
Gaugemaster 100O Model 100O - Single Track Controller O Gauge (Panel Mounted)
Single track controller designed to sit inside a control panel. This controller has a rotating dial to control the speed of your locomotive and a DPDT switch to control the direction, you can also switch it to the centre position to cut off the power to the track.Input: 1 x 18v AC (GMC-M2 or GMC-T2) Rated at 2.5 Amps Output: 1 x 14v DC Rated at 2.5 Amp Panel: 70mm x 105mm Depth: 50mm
More Info

Single track controller designed to sit inside a control panel. This controller has a rotating dial to control the speed of your locomotive and a DPDT switch to control the direction, you can also switch it to the centre position to cut off the power to the track.

Input: 1 x 18v AC (GMC-M2 or GMC-T2) Rated at 2.5 Amps
Output: 1 x 14v DC Rated at 2.5 Amp
Panel: 70mm x 105mm
Depth: 50mm
£50.00

Must be ordered - delivery as soon as possible.
(Product Ref 45351)
Cookies are disabled.
To place an order please call 01453 377030
Gaugemaster HH Model HH - Walkabout Unit with Feedback
Gaugemaster Model HH - Walkabout Unit with Feedback HHA good hand-held or walkabout type controller handset with a 1.5m lead attached. The controller features feedback compensation, giving better control of train speed over changing conditions, such as curves or grades.Suitable for most small gauges.Input:1 x 16v A.C. at a maximum of 1.25 amps Requires T1, M1 Transformer, or 100M ControllerOutput: 1 x 12v D.C. at 1 amp controlledMeasurements: 75mm x 50mm x 27mm deepFitted with 1.5 metres of 4 core cableNot suitable for use with coreless design motors or models fitted with DCC decoders.
More Info
Gaugemaster Model HH - Walkabout Unit with Feedback HH
A good hand-held or walkabout type controller handset with a 1.5m lead attached. The controller features feedback compensation, giving better control of train speed over changing conditions, such as curves or grades.
Suitable for most small gauges.

Input:1 x 16v A.C. at a maximum of 1.25 amps Requires T1, M1 Transformer, or 100M Controller
Output: 1 x 12v D.C. at 1 amp controlled
Measurements: 75mm x 50mm x 27mm deep
Fitted with 1.5 metres of 4 core cable

Not suitable for use with coreless design motors or models fitted with DCC decoders.
£41.95

Must be ordered - delivery as soon as possible.
(Product Ref 45360)
Cookies are disabled.
To place an order please call 01453 377030
Gaugemaster WM1 Wall Mounted Transformer 1x 18vAC/1amp
Gaugemaster Wall Mounted Transformer 1x 18vAC/1amp WM1The casing is made from high impact ABS Input: Mains (240v A.C.)Output: 1 x 18v A.C. at 1.1 ampMeasurements: 65mm x 80mm x 83mm
More Info
Gaugemaster Wall Mounted Transformer 1x 18vAC/1amp WM1
The casing is made from high impact ABS
Input: Mains (240v A.C.)
Output: 1 x 18v A.C. at 1.1 amp
Measurements: 65mm x 80mm x 83mm
£21.95

Must be ordered - delivery as soon as possible.
(Product Ref 45393)
Cookies are disabled.
To place an order please call 01453 377030
Gaugemaster T1 Model T1 -Transformer 2x 16v AC/1.25amps
Gaugemaster Model T1 -Transformer 2x 16v AC/1.25amps T1A useful AC transformer ideal for providing power for controllers and point motor supplies. Two 16-volt output windings are provided at a maximum output of 1.25amps.Please note that this transformer must be installed inside an enclosure suitable for mains power use.
More Info
Gaugemaster Model T1 -Transformer 2x 16v AC/1.25amps T1
A useful AC transformer ideal for providing power for controllers and point motor supplies. Two 16-volt output windings are provided at a maximum output of 1.25amps.
Please note that this transformer must be installed inside an enclosure suitable for mains power use.
£29.95

Must be ordered - delivery as soon as possible.
(Product Ref 45371)
Cookies are disabled.
To place an order please call 01453 377030
Gaugemaster T2 Model T2 - Transformer 1x 18v AC/2.5 amp
Open Construction TransformerInput: Mains (240v A.C.) use 3 amp fuseRequires own mains lead & plug to be fittedOutput: 1 x 18v A.C. at 2.5 amps (for ‘O’ Gauge)Requires own wires and cutouts as necessary
More Info
Open Construction Transformer
Input: Mains (240v A.C.) use 3 amp fuse
Requires own mains lead & plug to be fitted
Output: 1 x 18v A.C. at 2.5 amps (for ‘O’ Gauge)
Requires own wires and cutouts as necessary
£29.95

Must be ordered - delivery as soon as possible.
(Product Ref 33978)
Cookies are disabled.
To place an order please call 01453 377030
Gaugemaster T3 Model T3 -Transformer 1x 24v AC/1.25amps
Open Construction TransformerInput: Mains (240v A.C.) use 3 amp fuseRequires own mains lead & plug to be fittedOutput: 1 x 24v A.C. at 1.25 amps (for CDU)Requires own wires and cutouts as necessary
More Info
Open Construction Transformer
Input: Mains (240v A.C.) use 3 amp fuse
Requires own mains lead & plug to be fitted
Output: 1 x 24v A.C. at 1.25 amps (for CDU)
Requires own wires and cutouts as necessary
£29.95

Must be ordered - delivery as soon as possible.
(Product Ref 45372)
Cookies are disabled.
To place an order please call 01453 377030
Gaugemaster T5 Model T5 Transformer 1x12v AC/5amp
Open Construction TransformerInput: Mains (240v A.C.) use 3 amp fuseRequires own mains lead & plug to be fittedOutput: 1 x 12v A.C. at 5 ampsRequires own wires and cutouts as necessary
More Info

Open Construction Transformer
Input: Mains (240v A.C.) use 3 amp fuse
Requires own mains lead & plug to be fitted
Output: 1 x 12v A.C. at 5 amps
Requires own wires and cutouts as necessary

£35.00

Must be ordered - delivery as soon as possible.
(Product Ref 45373)
Cookies are disabled.
To place an order please call 01453 377030
Gaugemaster M1 Model M1 - Cased Transformer 2x16v AC/1amp
Mains Transformer - fully cased, plugged and output protected with circuit breakersInput: Mains (240v A.C.) use 3 amp fuseOutput: 2 x 16v A.C at 1 amp eachMeasurements: 99mm x 75mm x 65mm
More Info
Mains Transformer - fully cased, plugged and output protected with circuit breakers
Input: Mains (240v A.C.) use 3 amp fuse
Output: 2 x 16v A.C at 1 amp each
Measurements: 99mm x 75mm x 65mm
£54.95

Must be ordered - delivery as soon as possible.
(Product Ref 38381)
Cookies are disabled.
To place an order please call 01453 377030
Hornby R7293 HM6010 Bluetooth App Based Analogue Point Motor Controller
Four operating accessories or point motors maybe connected to each PAC unit with the power being supplied by a separate wall mounted transformer. It is possible to connect up to three PAC units to one transformer but this does depend on how much power is being taken by the accessories, consequently it may be necessary to add a further power unit.
More Info
Four operating accessories or point motors maybe connected to each PAC unit with the power being supplied by a separate wall mounted transformer. It is possible to connect up to three PAC units to one transformer but this does depend on how much power is being taken by the accessories, consequently it may be necessary to add a further power unit.
£42.49

Must be ordered - delivery as soon as possible.
(Product Ref 111049)
Cookies are disabled.
To place an order please call 01453 377030
Hornby R7292 HM6000 App Based Bluetooth Analogue Train Controller
Technology has moved on when it comes to controlling a 12vDC layout. There is no need for controller to be tethered to the track as by utilising Bluetooth low energy (BLE) technology Hornby's latest control system can now control a model railway with simplistic ease.
More Info
Technology has moved on when it comes to controlling a 12vDC layout. There is no need for controller to be tethered to the track as by utilising Bluetooth low energy (BLE) technology Hornby's latest control system can now control a model railway with simplistic ease.
£36.49

Must be ordered - delivery as soon as possible.
(Product Ref 111069)
Cookies are disabled.
To place an order please call 01453 377030
Have a question? Contact us

Analogue DC control is simple to understand and use. The controller unit supplies up to 12 volts DC to the two rails of the track, with power being collected by the wheels of locomotives to supply the motor. Altering the setting of the controller adjusts the voltage and thereby the speed of the train and reversing polarity reverses the trains' direction.
One controller can be used to supply several locomotives or trains, however all trains will run and stop at the same time. When a second circuit of track is added another controller is required to run the circuits separately. Isolating rail joiners or isolator tracks can be used to make sections of a layout which can be switched off, allowing additional trains and locomotives to be stopped or stored in sidings while another train is running.

These controllers are suitable for gauges N, OO, HO and O and for all manufactuers' trains.

The alternative control system is DCC Digital Command Control which uses an on-board microprocessor fitted to each train. Offering a wide range of functionality including sound systems DCC is worth considering for a new layout. Please call us if you have any questions.