Tamiya Robo Craft

Total length: 166mm Total weight: 95g (w/ out batteries) Body material: ABS resin Gearbox, motor, reverse switch also included A screwdriver for the assembly is provided Requires one AAA battery (sold separately) Continuous running time with Alkaline battery, 1 hrs

This new Robocraft Series item is perfect for young aspiring robot builders. Forward/reverse and left/right movements are produced by two motors in pre-assembled gearboxes, which are controlled by a 2-stick, 2-channel remote controller with self-neutral function. In addition, the mouth section is linked to the legs to recreate opening/closing movement. The teeth positions in the mouth section can be freely arranged as well. This fun kit is assembled using screws, and a screwdriver is included to make the task even easier. Transparent body allows viewing of internal mechanics. Includes 1 meter long control cable. Requires two R6/AA/UM3 alkaline batteries (sold separately).

New to the popular Robocraft Series is the Mechanical Fish. The movement of the crank arm is translated into the tail's left and right movement allowing it to swim. As opposed to the previously released blowfish (Item 71114), which had its body above the water, the upper half of this item acts as a float and allows the dorsal fin to be exposed to the surface with the rest of the fish totally submerged as it swims.

.

Total length: 165mm Total weight: 100g (w/ out batteries) Body material: ABS resin 2 possible gear ratios coupled with 4 different strides let you choose 8 different speeds Spring tail also included Gearbox, motor, reverse switch also included Requires one AA battery Continuous running time with Alkaline battery- 2hrs. at low speed/1hr. at high speed

Total length: 180mm Total weight: 95g (w/ out batteries) Body material: ABS resin 2 gears included, one for high speed and one for low speed. Motor and reverse switch also included Screwdriver for assembly is included Requires one AA battery (sold separately) Continuous running time with Alkaline battery: 3hrs. at low speed/1hr. at high speed

Total length: 135mm Total weight: 100g (w/ out batteries) Body material: ABS resin 2 possible different speeds Gearbox, motor, reverse switch also included Requires one AA battery Continuous running time with Alkaline battery, 1.5 hrs.

Total length: 190mm Total weight: 110g (w/ out batteries) Body material: ABS resin Gearbox, motor, reverse switch also included A screwdriver for the assembly is provided Requires one AA battery Continuous running time with Alkaline battery, 1.5 hrs.

Total length: 115mm Total weight: 95g (w/ out batteries) Body material: ABS resin Gearbox, motor also included Includes guides to be attached on both sides to make the mechanical rabbit useable on Mini 4WD circuits. A screwdriver for the assembly is provided Requires one R04/AAA/UM4 battery (sold separately) Continuous running time with Alkaline battery, 40 min.

Total length: 115mm Total weight: 105g (w/ out batteries) Body material: ABS resin Gearbox, motor, and reverse switch included 2 possible gear ratios coupled with 4 different strides let you choose 8 different speeds. A screwdriver for the assembly is provided. Requires one R04/AAA/UM4 battery (sold separately) Continuous running time with Alkaline battery, 2 hrs.

The latest and fastest release in the Robocraft Series, this galloping racehorse with jockey is loads of fun to build, loads of fun to play with, and educational too! Employing left and right legs moving at the same time, the legs and wheel base have been designed for stability and faster running. Overall this galloping racehorse can run 1.3 times faster than the mechanical rabbit.

Internal motor spins a cylindrical plate with a weight (a screw) placed on one side creating an updown rapid vibrating movement. This vibration is then conveyed to 3 rods that smoothly propel the model forward in a sliding type movement.

Internal motor spins a cylindrical plate with a weight (a screw) placed on one side creating an updown rapid vibrating movement. This vibration is then conveyed to 3 rods that smoothly propel the model forward in a sliding type movement.

When the four legged Mammoth gets into its stride, its head begins bobbing left to right. Has a gear ratio (203.7:1) which provides an ample walking speed. The mammoths' trunk is movable by hand. Clear ABS parts allow you to easily see the inside internal mechanisms at work. Easy to construct. (No cement required) Requires one AA battery (sold separately). Length: 165mm, Height: 107mm.

Length: 157mm, width: 83mm, height: 107mm (all measurements are approximate) A Submarine Motor Mini is included The model features water-resistant stickers for the beak and eyes Always dry off the model thoroughly and remove batteries after use! Requires 1 x AAA battery (not included) To comply with the CE regulation, D parts (cap lock and cap lock base) are added, and rib is added onto battery cap The cap lock is attached by screw for secure attachment of battery Remove the cap lock screw to remove battery cap When the battery cap is fully closed, the motor is switched on The Submarine Motor Mini is pre-assembled The right leg part has CE and WEEE marks moulded into it

The link mechanism converts the rotation of the submarine motor into the motion of legs and flippers On the ground, the model stands on three wheels - side wheels on the legs and a front centre wheel on its lower abdomen – on the ground and moves forward by swinging the body In the water, the model swims and gets the head out of water by the float on its neck Changing directions of wheels and flippers allows turning on the ground and in the water Plastic parts can be painted Includes one submarine motor Requires 1 x AAA battery (not included) To comply with the CE regulation, D parts (cap lock and cap lock base) are added, and rib is added onto battery cap The cap lock is attached by screw for secure attachment of battery Remove the cap lock screw to remove battery cap When the battery cap is fully closed, the motor is switched on The Submarine Motor Mini is pre-assembled