Sub Terrain

Foam formers for model railway trackbed and landscape features
Lightweight support panels.
Support Panels are made of extruded foam and designed to use as a strong, but lightweight terrain understructure. They are quick and easy to use. Cut easily with a hot wire foam cutter, knife or scissors. Top with flat foam board surface or cover with paper or plaster cloth to form a higher level of scenic terrain.

2 pieces, 18in x 24in formed of 2in concertina sections.

Article on the use of concertina support panels on Woodland Scenics website. (Opens in new tab/window)

£6.75
Warehouse: 4
Fast delivery from Warehouse.
(Product Ref 27052)
Lightweight support panels.
Support Panels are made of extruded foam and designed to use as a strong, but lightweight terrain understructure. They are quick and easy to use. Cut easily with a hot wire foam cutter, knife or scissors. Top with flat foam board surface or cover with paper or plaster cloth to form a higher level of scenic terrain.

2 pieces, 18in x 24in formed of 4in height concertina sections.

Article on the use of concertina support panels on Woodland Scenics website. (Opens in new tab/window)

£9.75
Warehouse: 2
Fast delivery from Warehouse.
(Product Ref 100645)
£8.75
Warehouse: 2
Fast delivery from Warehouse.
(Product Ref 100853)
£8.75
Warehouse: 3
Fast delivery from Warehouse.
(Product Ref 100852)

This package includes four 2.5in risers each 24in long. These risers are 0.25in thick, designed to allow a road to be added to the sub-terrain scenery base.

See Woodland Scenics website for information and video guides on the use of the sub-terrain construction system.

£5.75
Warehouse: 1
Fast delivery from Warehouse.
(Product Ref 100646)
Use No-News Paper to build terrain and substructure in preparation for a plaster shell. No-News Paper is heavier than newspaper, offering stronger support and requiring less paper when making wads. Hands stay clean. Convenient to store.

100 sq ft, 12 in x 100 ft (9.29 sq m, 30.4 cm x 30.4 m)
£14.50
Warehouse: 2
Plymouth: 1
Fast delivery from Warehouse.
(Product Ref 46331)

�This 2% Incline Set has eight sections that raise the elevation of your track from zero to four inches in 16 feet. Incline Sets allow smooth transition from one height to another. To install Inclines, center on the Risers, butt the sections tightly, pin in place with Foam Nails (ST1432) and attach. The Low Temp Foam Glue Gun (ST1445 and Glue Sticks ST1446) are the fastest way to assemble your layout, but you can also use Foam Tack Glue (ST1444).�

£23.25
Warehouse: 2
Fast delivery from Warehouse.
(Product Ref 75288)

This package of six 3% Incline Starters raise elevations of your track 3/4 inch in 24". Incline Starters allow smooth transition from one height to another. To install Inclines, center on the Risers, butt the sections tightly, pin in place with Foam Nails (ST1432) and attach. The Low Temp Foam Glue Gun (ST1445 and Glue Sticks ST1446) are the fastest way to assemble your layout, but you can also use Foam Tack Glue (ST1444).

£9.25
Warehouse: 3
Fast delivery from Warehouse.
(Product Ref 75292)
£6.75
Warehouse: 1
Fast delivery from Warehouse.
(Product Ref 37887)
There are 36 Strips in this Track-Bed Bulk Pack. These strips are the perfect roadbed for especially tight track applications. The strips are 5mm x 2 3/4" x 24". Track-Bed requires no pre-soaking like cork does: it remains flexible and won't dry out or become brittle! It aligns well with cork or Homasote applications. Install Track-Bed with Foam Tack Glue (ST1444). Pin in place with Foam Nails (ST1432).
£45.25
Warehouse: 2
Fast delivery from Warehouse.
(Product Ref 75299)
There are 12 Strips in this Track-Bed Bulk Pack. These strips are the perfect roadbed for especially tight track applications. The strips are 3mm x 1 1/4" x 24". Track-Bed requires no pre-soaking like cork does: it remains flexible and won’t dry out or become brittle! It aligns well with cork or Homasote applications. Install Track-Bed with Foam Tack Glue (ST1444). Pin in place with Foam Nails (ST1432).

£9.75
Warehouse: 1
Fast delivery from Warehouse.
(Product Ref 75301)
This Track-Bed Roll is 3mm x 1 1/4" x 24'. It offers a smooth, almost seamless application. Track-Bed requires no pre-soaking like cork does: it remains flexible and won’t dry out or become brittle! It aligns well with cork or Homasote applications. Install Track-Bed with Foam Tack Glue (ST1444). Pin in place with Foam Nails (ST1432).
£9.75

Stroud: 1
Delivery from stores takes a few days longer!
(Product Ref 75304)

 This package includes four 1/2"x24" Risers that are generally used with Incline Starters to create varying grades on your layout. Risers are easily flexed to form curves and can be used on plywood or a foam base. To install, butt the sections tightly, pin in place with Foam Nails (ST1432) and attach. The Low Temp Foam Glue Gun (ST1445, and Glue Sticks ST1446) is the fastest way to assemble your foam base, but you can also use Foam Tack Glue (ST1444). 

£9.25

Will be ordered - delivery as soon as possible.
(Product Ref 69612)

�This package includes four 1"x24" Risers that are generally used with Incline Starters to create varying grades on your layout. Risers are easily flexed to form curves and can be used on plywood or a foam base. To install, butt the sections tightly, pin in place with Foam Nails (ST1432) and attach. The Low Temp Foam Glue Gun (ST1445, and Glue Sticks ST1446) is the fastest way to assemble your foam base, but you can also use Foam Tack Glue (ST1444).

£11.75

Will be ordered - delivery as soon as possible.
(Product Ref 69611)

 This package includes four 2"x24" Risers that are used to elevate your track. Risers are easily flexed to form curves and can be used on plywood or a foam base. To install, butt the sections tightly, pin in place with Foam Nails (ST1432) and attach. The Low Temp Foam Glue Gun (ST1445, and Glue Sticks ST1446) is the fastest way to assemble your foam base, but you can also use Foam Tack Glue (ST1444).

£13.00

Will be ordered - delivery as soon as possible.
(Product Ref 69609)
This package includes two 4"x24" Risers that are used for dramatic, steep relief on your layout, and to create lower areas for rivers and valleys. Risers are easily flexed to form curves and can be used on plywood or a foam base. To install, butt the sections tightly, pin in place with Foam Nails (ST1432) and attach. The Low Temp Foam Glue Gun (ST1445, and Glue Sticks ST1446) is the fastest way to assemble your foam base, but you can also use Foam Tack Glue (ST1444).
£13.00

Will be ordered - delivery as soon as possible.
(Product Ref 74461)
A set of sub-terrain formers manufactured from lightweight in expanded polystyrene designed to create a 4% grade incline (1 in 25). Sufficient sections are provided to construct an incline rising 4in in� 8 feet of linear track and the incline risers are articulated, allowing track to curves to be incorporated.
£17.50

Will be ordered - delivery as soon as possible.
(Product Ref 67714)

 This package of eight 2% Incline Starters raise elevations of your track 1/2 inch in 24". Incline Starters allow smooth transition from one height to another. To install Inclines, center on the Risers, butt the sections tightly, pin in place with Foam Nails (ST1432) and attach. The Low Temp Foam Glue Gun (ST1445 and Glue Sticks ST1446) are the fastest way to assemble your layout, but you can also use Foam Tack Glue (ST1444).

£9.25

Will be ordered - delivery as soon as possible.
(Product Ref 75289)
This package of four 4% Incline Starters raise elevations of your track one inch in 24". Incline Starters allow smooth transition from one height to another. To install Inclines, center on the Risers, butt the sections tightly, pin in place with Foam Nails (ST1432) and attach. The Low Temp Foam Glue Gun (ST1445 and Glue Sticks ST1446) are the fastest way to assemble your layout, but you can also use Foam Tack Glue (ST1444).
£9.25

Will be ordered - delivery as soon as possible.
(Product Ref 75290)

This package includes four 3/4"x24" Risers that are generally used with Incline Starters to create varying grades on your layout. Risers are easily flexed to form curves and can be used on plywood or a foam base. To install, butt the sections tightly, pin in place with Foam Nails (ST1432) and attach. The Low Temp Foam Glue Gun (ST1445, and Glue Sticks ST1446) is the fastest way to assemble your foam base, but you can also use Foam Tack Glue (ST1444)

£10.50

Will be ordered - delivery as soon as possible.
(Product Ref 75291)
A set of sub-terrain formers manufactured from lightweight in expanded polystyrene designed to create a 3% grade incline (1 in 32). Sufficient sections are provided to construct an incline rising 4�in in 12 feet of linear track and the incline risers are articulated, allowing track to curves to be incorporated.
£23.25

Will be ordered - delivery as soon as possible.
(Product Ref 59074)

Woodland Scenics ST1419 Interlocking Profile Boards (Pack of 2)

Use the interlocking Profile Boards and Connector pieces to create the layout perimeters and mountain profiles. Place Boards end-to-end or stack to any height using the Connectors. Trim Profile Boards with the Hot Wire Foam Cutter or a Foam Knife and glue in place with Foam Tack Glue or the Low Temp Foam Glue Gun and Glue Sticks.
Each Board measures 24" l x 8" h (20.3 cm x 60.9 cm)

£14.00

Will be ordered - delivery as soon as possible.
(Product Ref 22159)

 1/4" Foam Sheets work great for creating tunnels with curves. They are 12" wide x 24" long. Pin with Foam Nails (ST1432) and glue in place with the Low Temp Foam Glue Gun (ST1445 and Glue Sticks ST1446) or Foam Tack Glue (ST1444).

£23.25

Will be ordered - delivery as soon as possible.
(Product Ref 69610)
1/2" Foam Sheets work great for forming tunnel walls, ceilings or overpass supports. They are 12" wide x 24" long. Pin with Foam Nails (ST1432) and glue in place with the Low Temp Foam Glue Gun (ST1445 and Glue Sticks ST1446) or Foam Tack Glue (ST1444).
£27.75

Will be ordered - delivery as soon as possible.
(Product Ref 74462)
1" Foam Sheets work great for elevated areas and for supports. They are 12" wide x 24" long. Pin with Foam Nails (ST1432) and glue in place with the Low Temp Foam Glue Gun (ST1445 and Glue Sticks ST1446) or Foam Tack Glue (ST1444).
£32.50

Will be ordered - delivery as soon as possible.
(Product Ref 74463)