Setrack Sections

Pre-formed clip-together track sections ideal for rapid layout building in small spaces

N Gauge Setrack Planbooks are an ideal introduction to the hobby. Each of the layout plans is illustrated with a suggestion of how the layout can be transformed into a realistic representation of a real railway, and a detailed list of the components required is also supplied. Plus pages of useful tips on constructing baseboards, track laying etc - in fact all you need to know to make a good start (Planbooks are included in Starter Track sets ST-300 and 301)

This new edition contains 48 A4 size pages featuring 27 plans ranging from small ovals and end-to-end shelf layouts to room-sized plans for mainlines in miniature.

£2.50
Warehouse: 1
Fast delivery from Warehouse.
(Product Ref 31900)
Standard length N gauge straight track section 87mm / 3 7/16in long.

The standard straight is the basic section of straight track in the Setrack system. The ST5/ST6 points are made to the same length along the straight side, doible straights ST11 are double this length.
Peco track is manufactured in Great Britain using quality nickel-silver rail which offers good electrical conductivity and corrosion resistance. Setrack track is supplied with fishplates already fitted and is compatible with the track supplied with Graham Farish train sets. Suitable for use with all manufactuers' N gauge model trains.
£1.65
Warehouse: 9+
Bristol: 9+, Cardiff: 8, Gloucester: 6, Plymouth: 2, Stroud: 5
Fast delivery from Warehouse.
(Product Ref 31901)
Short straight track section. Length 58mm (2 5/16in)

Slightly shorter that the standard straight, useful to fill in gaps, maximise the length of sidings etc.
Peco track is manufactured in Great Britain using quality nickel-silver rail which offers good electrical conductivity and corrosion resistance. Setrack track is supplied with fishplates already fitted and is compatible with the track supplied with Graham Farish train sets. Suitable for use with all manufactuers' N gauge model trains.
£1.35
Warehouse: 5
Bristol: 9+, Cardiff: 9+, Gloucester: 9+, Plymouth: 9+, Stroud: 2
Fast delivery from Warehouse.
(Product Ref 31903)
Double length straight track section 174mm / 6 7/8in long.

Twice the length of the standard straight ST-1 double straights are ideal for long straight sections on a layout, reducing the number of joints.
Peco track is manufactured in Great Britain using quality nickel-silver rail which offers good electrical conductivity and corrosion resistance. Setrack track is supplied with fishplates already fitted and is compatible with the track supplied with Graham Farish train sets. Suitable for use with all manufactuers' N gauge model trains.
£2.10
Warehouse: 9+
Stroud: 3
Fast delivery from Warehouse.
(Product Ref 31902)

Double length no.1 radius curve section.

Radius 228mm / 9in. Angle 45 degrees. 8 required for a complete circle.
Double curves allow you to build up a circle of track quickly with a minimum of joints.
Peco track is manufactured in Great Britain using quality nickel-silver rail which offers good electrical conductivity and corrosion resistance. Setrack track is supplied with fishplates already fitted and is compatible with the track supplied with Graham Farish train sets. Suitable for use with all manufactuers' N gauge model trains.

£2.30
Warehouse: 9+
Bristol: 1, Stroud: 3
Fast delivery from Warehouse.
(Product Ref 31905)
Standard no.1 radius curve section.

Radius 228mm / 9in. Angle 22.5 degrees. 16 required to for a complete circle.

This curve is equivalent to the curved side of Setrack ST5/ST6 points and can be used with a point to bring the divirging track back to parallel.
Peco track is manufactured in Great Britain using quality nickel-silver rail which offers good electrical conductivity and corrosion resistance. Setrack track is supplied with fishplates already fitted and is compatible with the track supplied with Graham Farish train sets. Suitable for use with all manufactuers' N gauge model trains.

£1.65
Warehouse: 5
Bristol: 9+, Cardiff: 9+, Stroud: 9+
Fast delivery from Warehouse.
(Product Ref 31904)

Half-length no.1 radius curve section.

Radius 228mm / 9in. Angle 11.25 degrees. 32 required for a complete circle.

£1.35
Warehouse: 3
Bristol: 9+, Gloucester: 9+, Plymouth: 4, Stroud: 9+
Fast delivery from Warehouse.
(Product Ref 31907)
Double length 2nd radius curve track section.
 
Radius 10 3/8in (263.5mm) angle 45 degrees. 8 required to complete a circle.
Double curves allow circuits to be built more quickly and with fewer joints. Larger radius curves allow for higher train speeds.
Peco track is manufactured in Great Britain using quality nickel-silver rail which offers good electrical conductivity and corrosion resistance. Setrack track is supplied with fishplates already fitted and is compatible with the track supplied with Graham Farish train sets. Suitable for use with all manufactuers' N gauge model trains.
£2.65
Warehouse: 9+
Gloucester: 8, Stroud: 3
Fast delivery from Warehouse.
(Product Ref 31909)
Standard 2nd radius curve track section.

Radius 10 3/8in (263.5mm) angle 22.25 degrees. 16 per circle.
Larger radius curves allow trains to be run at higher speeds.
Peco track is manufactured in Great Britain using quality nickel-silver rail which offers good electrical conductivity and corrosion resistance. Setrack track is supplied with fishplates already fitted and is compatible with the track supplied with Graham Farish train sets. Suitable for use with all manufactuers' N gauge model trains.
£2.00
Warehouse: 9+
Bristol: 9+, Cardiff: 7, Gloucester: 9+, Stroud: 4
Fast delivery from Warehouse.
(Product Ref 31908)

Large 3rd radius Setrack curve, at 298.5mm/11.75in, ideal for those wanting to run long passenger trains and modern goods vehicles at speed without derailments.

Double curve 45 degrees. 8 required to form a complete circle.

Peco track is manufactured in Great Britain using quality nickel-silver rail which offers good electrical conductivity and corrosion resistance. Setrack track is supplied with fishplates already fitted and is compatible with the track supplied with Graham Farish train sets. Suitable for use with all manufactuers' N gauge model trains.

£3.10
Warehouse: 9+
Bristol: 2, Cardiff: 4, Gloucester: 1, Stroud: 7
Fast delivery from Warehouse.
(Product Ref 64094)

No.3 radius Setrack curve.

At 298.5mm/11.75in radius this is ideal for those wanting to run long passenger trains and modern goods vehicles at speed without derailments.

Standard curve 22.5 degrees. 16 required to form a complete circle.

Peco track is manufactured in Great Britain using quality nickel-silver rail which offers good electrical conductivity and corrosion resistance. Setrack track is supplied with fishplates already fitted and is compatible with the track supplied with Graham Farish train sets. Suitable for use with all manufactuers' N gauge model trains.

£2.35
Warehouse: 9+
Bristol: 9+, Cardiff: 9+, Gloucester: 6, Stroud: 9+
Fast delivery from Warehouse.
(Product Ref 64093)

A new large radius Setrack curve. This is ideal for those wanting to run long passenger trains and modern goods vehicles at speed without derailments.

Radius 333.4mm/13.1in. Angle 45 degrees. 8 required to for a complete circle.

Peco track is manufactured in Great Britain using quality nickel-silver rail which offers good electrical conductivity and corrosion resistance. Setrack track is supplied with fishplates already fitted and is compatible with the track supplied with Graham Farish train sets. Suitable for use with all manufacturers' N gauge model trains.

£3.40
Warehouse: 9+
Cardiff: 9+, Gloucester: 1, Stroud: 6
Fast delivery from Warehouse.
(Product Ref 75477)

A new large radius Setrack curve. This is ideal for those wanting to run long passenger trains and modern goods vehicles at speed without derailments.

Radius 333.4mm/13.1in. Angle 22.5 degrees. 16 required to for a complete circle.

Peco track is manufactured in Great Britain using quality nickel-silver rail which offers good electrical conductivity and corrosion resistance. Setrack track is supplied with fishplates already fitted and is compatible with the track supplied with Graham Farish train sets. Suitable for use with all manufactuers' N gauge model trains.

£2.75
Warehouse: 9+
Bristol: 9+, Cardiff: 1, Gloucester: 9+, Stroud: 8
Fast delivery from Warehouse.
(Product Ref 80451)

Pack of 8 ST-18 standard length 4th radius curved track sections. Pack contains sufficient for a half circle of track.

Radius 333.4mm/13.1in. Angle 22.5 degrees. 16 required to for a complete circle.
This large radius is ideal for running modern high-speed passenger trains.

Peco track is manufactured in Great Britain using quality nickel-silver rail which offers good electrical conductivity and corrosion resistance. Setrack track is supplied with fishplates already fitted and is compatible with the track supplied with Graham Farish train sets. Suitable for use with all manufacturers' N gauge model trains.

£20.40
Warehouse: 2
Fast delivery from Warehouse.
(Product Ref 106057)
Right hand Setrack turnout with insulated frog.
Radius 9in (228mm), angle 22.25degrees, length 87mm (3 7/16in).
These standard Setrack points are the same length as the ST-1 straight, with the curved arm equivalent to the ST-3 curve.
£11.50
Warehouse: 9+
Bristol: 4, Plymouth: 3
Fast delivery from Warehouse.
(Product Ref 31910)

Right handed Peco Setrack crossing, used to create double-track junctions using the Peco Setrack system.

Use with ST-5 Right Hand points to form a crossing from a parallel track. The longer track passing through the crossing allows for the extra length needed by the diagonal track to maintain the sectional track geometry.

£12.20
Warehouse: 1
Fast delivery from Warehouse.
(Product Ref 63187)
Left handed Peco Setrack crossing, used to create double-track junctions using the Peco Setrack system.
Use with ST-6 Left Hand points to form a crossing from a parallel track. The longer track passing through the crossing allows for the extra length needed by the diagonal track to maintain the sectional track geometry.

Templates for Peco points are available from the Peco website.
£12.20
Warehouse: 2
Bristol: 1
Fast delivery from Warehouse.
(Product Ref 36686)

One piece unit moulded in brown plastic with slots to locate on code 80 Setrack or Steamline flexitrack.

£2.20
Warehouse: 9+
Bristol: 1, Gloucester: 1, Stroud: 6
Fast delivery from Warehouse.
(Product Ref 31913)
Pressed metal power connecting clips designed to fit securely underneath N gauge code 80 Setrack and Streamline flexitrack. Eyelets are provided to allow easy wire connection.
£3.20
Warehouse: 9+
Bristol: 5, Cardiff: 1, Gloucester: 1, Stroud: 2
Fast delivery from Warehouse.
(Product Ref 31914)

Track power connector for N gauge track with power cable for Bachmann controllers (3.5mm stereo plug connection)

£4.95
Warehouse: 4
Fast delivery from Warehouse.
(Product Ref 69608)
Curved turnouts are useful to construct sweeping curved junctions and helpful in saving layout space as stations fit much better alongside straight tracks. Whether it is to install a cross-over between tracks or to start a new siding doing so on a curve allows better use of limited space.
Curved points radii approximate to No.2 radius for the inner curve and No.3 radius for the outer curve, though the actual radii are usually adjusted to ensure the two routes diverge quickly and a couple of special tracks are needed to compensate. Peco have decided to supply these extra track pieces with the N gauge Setrack curved points, so you will not be short of the special track pieces.

When installing a cross-over use the short curved and straight track pieces to fit the concentric curve geometry, one of each is provided in each pack, so there will be one spare straight piece which can be used elsewhere on the layout. (Note, while part numbers are shown for these track piece these are not available separately.)

Templates for Peco points are available from the Peco website.

£18.55
Warehouse: 2
Fast delivery from Warehouse.
(Product Ref 93918)
Easy to use train railing device for N gauge models. Simply fit the railing ramp to a straight section of track, clipping the guide tongue between the rails. Roll trucks and carriages down the ramp and the wheels will be guided correctly onto the rails.
£2.95

Gloucester: 2
Delivery from stores takes a few days longer!
(Product Ref 31996)

Pack of 8 ST-16 No.3 radius standard length Setrack curved track sections. Sufficient for a half circle of track.
At 298.5mm/11.75in radius this is ideal for those wanting to run long passenger trains and modern goods vehicles at speed without derailments.

Standard curve 22.5 degrees. 16 required to form a complete circle.

Peco track is manufactured in Great Britain using quality nickel-silver rail which offers good electrical conductivity and corrosion resistance. Setrack track is supplied with fishplates already fitted and is compatible with the track supplied with Graham Farish train sets. Suitable for use with all manufacturers' N gauge model trains.

£17.20

Plymouth: 1
Delivery from stores takes a few days longer!
(Product Ref 106055)
Left hand Setrack turnout with insulated frog.
Radius 9in (228mm), angle 22.25 degrees, length 87mm (3 7/16in).
These standard Setrack points are the same length as the ST-1 straight, with the curved arm equivalent to the ST-3 curve.
£11.50

Bristol: 3, Plymouth: 2
Delivery from stores takes a few days longer!
(Product Ref 31911)
A useful N gauge track set providing enough track from which several track plans can be assembled and expanded if with either Setrack sectional or Streamline flexible track.
Set contains the following track sections : 6 x ST1 straights, 5 x ST3 standard curves, 1 x ST5 1 x ST6 left and right hand standard points,  2 x ST8 siding buffer stops, 2 x ST9, 3 x ST11 double straights, 6 x ST12 double curves. An N1 Setrack Plan book is also supplied, giving some excellent track plan ideas.
Typical oval track layouts measure 32"  by 20" with internal sidings. Add an extra 2" in to accommodate an external siding.
£64.00

Must be ordered - delivery as soon as possible.
(Product Ref 28386)
PECO Setrack N gauge Starter Set with 2nd radius curves, containing enough components to create an oval of track plus two sidings.
Contents: 17 pieces of track, 2 x turnouts, 2 buffer stops and the Setrack Planbook for N gauge.
Use in conjunction with the ST-300 1st radius set to enables creation of a double track circuit with crossover.
£64.00

Must be ordered - delivery as soon as possible.
(Product Ref 106046)
Pack of 4 standard length N gauge straight track sections ST-1. Each 87mm / 3 7/16in long.

The standard straight is the basic section of straight track in the Setrack system. The ST5/ST6 points are made to the same length along the straight side, double straights ST11 are double this length.
Peco track is manufactured in Great Britain using quality nickel-silver rail which offers good electrical conductivity and corrosion resistance. Setrack track is supplied with fishplates already fitted and is compatible with the track supplied with Graham Farish train sets. Suitable for use with all manufacturers' N gauge model trains.
£12.50

Must be ordered - delivery as soon as possible.
(Product Ref 106047)
Pack of 4 short straight track sections ST-2. Length 58mm (2 5/16in)

Slightly shorter that the standard straight, useful to fill in gaps, maximise the length of sidings etc.
Peco track is manufactured in Great Britain using quality nickel-silver rail which offers good electrical conductivity and corrosion resistance. Setrack track is supplied with fishplates already fitted and is compatible with the track supplied with Graham Farish train sets. Suitable for use with all manufactures' N gauge model trains.
£4.90

Must be ordered - delivery as soon as possible.
(Product Ref 106048)
Pack of 8 ST-11 double length straight track sections, each 174mm / 6 7/8in long.

Twice the length of the standard straight ST-1 double straights are ideal for long straight sections on a layout, reducing the number of joints.
Peco track is manufactured in Great Britain using quality nickel-silver rail which offers good electrical conductivity and corrosion resistance. Setrack track is supplied with fishplates already fitted and is compatible with the track supplied with Graham Farish train sets. Suitable for use with all manufacturers' N gauge model trains.
£15.50

Must be ordered - delivery as soon as possible.
(Product Ref 106051)

Pack of 4 ST-12 double length no.1 radius curve track sections.
Radius 228mm / 9in. Angle 45 degrees. 8 required for a complete circle. Pack contains sufficient sections for a half circle.

Double curves allow you to build up a circle of track quickly with a minimum of joints.
Peco track is manufactured in Great Britain using quality nickel-silver rail which offers good electrical conductivity and corrosion resistance. Setrack track is supplied with fishplates already fitted and is compatible with the track supplied with Graham Farish train sets. Suitable for use with all manufactuers' N gauge model trains.

£8.50

Must be ordered - delivery as soon as possible.
(Product Ref 106052)
Pack of 8 Peco ST-3 no.1 radius standard curve track section.
Radius 228mm / 9in. Angle 22.5 degrees. 16 sections required to for a complete circle, this pack contains sufficient parts for a half-circle of track.

This curve is equivalent to the curved side of Setrack ST5/ST6 points and can be used with a point to bring the divirging track back to parallel.
Peco track is manufactured in Great Britain using quality nickel-silver rail which offers good electrical conductivity and corrosion resistance. Setrack track is supplied with fishplates already fitted and is compatible with the track supplied with Graham Farish train sets. Suitable for use with all manufacturers' N gauge model trains.

£12.00

Must be ordered - delivery as soon as possible.
(Product Ref 106049)

Pack of 4 Peco ST-4 n gauge Half-length no.1 radius curve track sections.
Radius 228mm / 9in. Angle 11.25 degrees. 32 required for a complete circle. Pack contains track pieces equivalent to two standard or one double curve section.

£4.90

Must be ordered - delivery as soon as possible.
(Product Ref 106050)
Pack of 4 ST-15 double length 2nd radius curve track sections. Sufficient for a half circle of track.
Radius 10 3/8in (263.5mm) angle 45 degrees. 8 required to complete a circle.

Double curves allow circuits to be built more quickly and with fewer joints. Larger radius curves allow for higher train speeds.
Peco track is manufactured in Great Britain using quality nickel-silver rail which offers good electrical conductivity and corrosion resistance. Setrack track is supplied with fishplates already fitted and is compatible with the track supplied with Graham Farish train sets. Suitable for use with all manufactuers' N gauge model trains.
£9.90

Must be ordered - delivery as soon as possible.
(Product Ref 106054)
Pack of 8 standard 2nd radius curved track sections.
Radius 10 3/8in (263.5mm) angle 22.25 degrees. 16 per circle. Pack contains sufficient for a half circle of track.

Larger radius curves allow trains to be run at higher speeds.
Peco track is manufactured in Great Britain using quality nickel-silver rail which offers good electrical conductivity and corrosion resistance. Setrack track is supplied with fishplates already fitted and is compatible with the track supplied with Graham Farish train sets. Suitable for use with all manufacturers' N gauge model trains.
£14.80

Must be ordered - delivery as soon as possible.
(Product Ref 106053)

Pack of 4 3rd radius Setrack double length curved tracks. Pack contains sufficient for a half circle of track.
At 298.5mm/11.75in, ideal for those wanting to run long passenger trains and modern goods vehicles at speed without derailments.
Double curve 45 degrees. 8 required to form a complete circle.

Peco track is manufactured in Great Britain using quality nickel-silver rail which offers good electrical conductivity and corrosion resistance. Setrack track is supplied with fishplates already fitted and is compatible with the track supplied with Graham Farish train sets. Suitable for use with all manufacturers' N gauge model trains.

£11.50

Must be ordered - delivery as soon as possible.
(Product Ref 106056)

Pack of 4 double length 4th radius curved track sections. Pack contains sufficient for a half circle of track.

Radius 333.4mm/13.1in. Angle 45 degrees. 8 required to for a complete circle.

Peco track is manufactured in Great Britain using quality nickel-silver rail which offers good electrical conductivity and corrosion resistance. Setrack track is supplied with fishplates already fitted and is compatible with the track supplied with Graham Farish train sets. Suitable for use with all manufacturers' N gauge model trains.

£12.70

Must be ordered - delivery as soon as possible.
(Product Ref 106058)
Peco N Setrack Power Connection Standard Straight ST-10
Peco Setrack standard straight track section pre-wired with red and black wires attached to the joiners for quick connection of the track power supply.
Simplifying the task of powering the track the wires, approx 195mm, are attached in such a way that they can be brought out to the same side of the track before being further attached to the power supply. The length will also be plenty for dropping through holes beneath the track to connect with feed wires hidden beneath the baseboard.
Standard length straight equivilent to ST-1.
£4.65

Must be ordered - delivery as soon as possible.
(Product Ref 57436)
Peco N Setrack Left Hand Double Radius Curved Turnout ST-45
Curved turnouts are useful to construct sweeping curved junctions and helpful in saving layout space as stations fit much better alongside straight tracks. Whether it is to install a cross-over between tracks or to start a new siding doing so on a curve allows better use of limited space.
Curved points radii approximate to No.2 radius for the inner curve and No.3 radius for the outer curve, though the actual radii are usually adjusted to ensure the two routes diverge quickly and a couple of special tracks are needed to compensate. Peco have deciced to supply these extra track pieces with the N gauge Setrack curved points, so you will not be short of the special track pieces.

When installing a cross-over use the short curved and straight track pieces to fit the concentric curve geometry, one of each is provided in each pack, so there will be one spare straight piece which can be used elsewhere on the layout. (Note , while part numbers are shown for these track piece these are not available separately.)

£18.55

Must be ordered - delivery as soon as possible.
(Product Ref 93919)
Have a question? Contact us

Peco Setrack provides a range of rigid track sections, making it easy to construct a layout. Three diferent curve radii are available, allowing circuits to be created, while the rigid sleeper base ensures the curves are formed smoothly.

Peco track is manufactured in Great Britain using quality nickel-silver rail which offers good electrical conductivity and corrosion resistance. Setrack track is supplied with fishplates already fitted and is compatible with the track supplied with Graham Farish train sets. Suitable for use with all manufactuers' N gauge model trains.

Web Stock - Peco maintain large stocks of track so we are confident that we can obtain stock within a few days and supply your full requirements quickly.