Ratio Lineside

Lineside fixtures,loading gauges, fencing.
Handrail Stanchions, Single Rail

Always difficult to scratchbuild, these realistic features will enhance any industrial installation that needs a single rail safety barrier. Pack contains 20 injection moulded supports and 400mm length of brass wire.

£4.75
Warehouse: 2
Bristol: 1, Cardiff: 1, Plymouth: 1
Fast delivery from Warehouse.
(Product Ref 77369)
Ratio's signal control kit contains a lever, operating twine, screw-in eyelets and signal operating mechanism to allow remote operation of Ratio signals.
£4.15
Warehouse: 1
Fast delivery from Warehouse.
(Product Ref 32209)
After loading, open wagons were checked for height using this simple gauge to ensure that loads did not hit bridges etc. and therefore were usually placed near the yard exit. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model.
£4.60
Warehouse: 2
Cardiff: 1, Plymouth: 1
Fast delivery from Warehouse.
(Product Ref 32232)

Loading gauges were an essential feature of all goods yards, most public sidings and many private sidings. The overhead gauge allowed loaded wagons to be checked quickly and easily for height and width of the load, ensuring the load would travel safely.

This Southern Railway design was built with a concrete post. Many of these are still standing!

£5.80
Warehouse: 2
Bristol: 1, Gloucester: 1
Fast delivery from Warehouse.
(Product Ref 30741)

A simple plastic kit of the GWR standard pattern water crane, complete with base and control column. A drain grille with water catcher funnel is supplied to be positioned under the water bag in the rest position along with a fire devil with tall chimney.

The fire devil is a small coal burning stove type device. The GWR and most other companies used these with the tall chimney ending just below the arm of a water crane to ensure that the water crane did no freeze up in cold weather.

£10.35
Warehouse: 2
Fast delivery from Warehouse.
(Product Ref 76412)
Supplied with pre-coloured parts although painting and/or weathering can add realism. The wire to represent the railings is not included; glue is also required to complete this model.
This pack contains:
• 50 Fence Posts
• 10 Gates
• 10 Signs
• 5 Stand Pipes
• 15 Cow Pats!
£6.65
Warehouse: 2
Bristol: 1, Cardiff: 1
Fast delivery from Warehouse.
(Product Ref 32233)
Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model.
This pack contains:
• 340mm of Straight Fencing
• 2 x 102mm lengths of Ramp Fencing
• 1 Large and 1 Small Gate
• 2 Ramp Gates
• 1 Ticket Gate
£5.15
Warehouse: 3
Bristol: 1, Plymouth: 1
Fast delivery from Warehouse.
(Product Ref 30742)
Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model.
This pack contains 680mm of fencing.
£4.75
Warehouse: 1
Plymouth: 3
Fast delivery from Warehouse.
(Product Ref 32234)
Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model.
This pack contains 680mm of fencing.
£4.75
Warehouse: 4
Bristol: 1, Cardiff: 1
Fast delivery from Warehouse.
(Product Ref 32235)

Although listed by Ratio as GWR lineside fencing this type of fence was specified by the Board of Trade who regulated Britain's railways and was used by all railway companies until the increased use of more robust security paling fencing since the 1990s..
Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model.
This pack contains 36 posts and enough wire to make 720mm of fencing.

£4.75
Warehouse: 2
Cardiff: 1, Plymouth: 1
Fast delivery from Warehouse.
(Product Ref 30743)
Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model.
This pack contains 860mm of countryside fencing.
£4.75
Warehouse: 1
Bristol: 2, Gloucester: 1
Fast delivery from Warehouse.
(Product Ref 30709)
Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model.
This pack contains 860mm of countryside fencing.
£4.75
Warehouse: 5
Bristol: 1
Fast delivery from Warehouse.
(Product Ref 30708)
Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model.
This pack contains 680mm of classic Midland Railway diagonal style fencing fencing.
£4.75
Warehouse: 3
Bristol: 1, Cardiff: 1, Gloucester: 1, Stroud: 1
Fast delivery from Warehouse.
(Product Ref 30710)
Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model.
This pack contains 680mm of classic Midland Railway diagonal style fencing fencing.
£4.75
Warehouse: 2
Bristol: 2, Plymouth: 1
Fast delivery from Warehouse.
(Product Ref 32236)
Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model.
This pack contains 485mm of fencing; the SR's modular design makes it easy to form ramp sections or follow other changes in ground contour.
£5.15
Warehouse: 2
Bristol: 2, Cardiff: 1, Gloucester: 1
Fast delivery from Warehouse.
(Product Ref 32237)
Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model.
This pack contains:
• 340mm of Straight Fencing
• 2 x 102mm lengths of Ramp Fencing
• 1 Large and 1 Small Gate
• 2 Ramp Gates
• 1 Ticket Gate
£5.15
Warehouse: 1
Bristol: 2
Fast delivery from Warehouse.
(Product Ref 30707)
Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model.
This pack contains 680mm of fencing.
£4.75
Warehouse: 2
Bristol: 1, Gloucester: 1
Fast delivery from Warehouse.
(Product Ref 32238)
Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. The model faithfully captures the mitred edges of the prototype; this pack contains 600mm of fencing.
£6.30
Warehouse: 1
Fast delivery from Warehouse.
(Product Ref 32239)
Kit includes:
• 2 x 120mm ramps (1 L/H, 1 R/H)
• 2 large gates and 2 small gates
£6.60
Warehouse: 1
Cardiff: 1, Plymouth: 1
Fast delivery from Warehouse.
(Product Ref 39674)
Classic style fencing modelled on a GWR design, but still seen also in many other places, around parks, public buildings, monuments etc. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model.
This pack contains 700mm of fencing.
£5.20
Warehouse: 2
Cardiff: 1
Fast delivery from Warehouse.
(Product Ref 32240)

Classic style fencing modelled on a GWR design, but still seen also in many other places, around parks, public buildings, monuments etc. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model.
This pack contains:
• 2 x 100mm lengths of ramp fencing
• 8 assorted gates

£5.80
Warehouse: 3
Cardiff: 1, Plymouth: 1
Fast delivery from Warehouse.
(Product Ref 30706)
Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model.
This pack contains:
• 1600mm of fencing
• Includes road and rail gates.
£12.90
Warehouse: 3
Bristol: 1, Cardiff: 1, Plymouth: 1
Fast delivery from Warehouse.
(Product Ref 32241)
Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model.
This pack contains:
• 8 x 75mm lengths of fencing
• 16 Mounting Posts
£5.80
Warehouse: 3
Bristol: 1, Gloucester: 1
Fast delivery from Warehouse.
(Product Ref 32242)
£4.15
Warehouse: 1
Cardiff: 1, Plymouth: 1
Fast delivery from Warehouse.
(Product Ref 32243)
16 Telegraph poles, these also carried railway bell codes and phone connections between signal boxes and stations as well as GPO lines. Height 100mm
£4.75
Warehouse: 2
Bristol: 1, Cardiff: 1, Gloucester: 1
Fast delivery from Warehouse.
(Product Ref 32244)
Includes 9 non working lamps with a selection or parts to make double or single standard lamps, or wall lamps. Glue and paints required to complete model. Height 46mm.
£5.25
Warehouse: 1
Bristol: 1, Gloucester: 1, Plymouth: 1, Stroud: 1
Fast delivery from Warehouse.
(Product Ref 32245)
Non working concrete lamp posts, can make 4 double standards or single standards and wall brackets. First produced by the Southern Railway the use of concrete lamp posts spread to stations on other regions after nationalisation.
Height 64mm
£5.25
Warehouse: 2
Bristol: 1, Plymouth: 1
Fast delivery from Warehouse.
(Product Ref 32246)
5 Steel type street lamps, 96mm high. Glue and paints required to complete model.
£6.30
Warehouse: 1
Bristol: 1, Gloucester: 1, Plymouth: 1
Fast delivery from Warehouse.
(Product Ref 32247)
Placed at the foot of platform end ramps, barrow crossings allow light goods and luggage to be transferred across a double track to an adjoining platform by railway staff. Glue and paints required to complete model.
£5.80
Warehouse: 1
Plymouth: 1
Fast delivery from Warehouse.
(Product Ref 30744)
Makes 4 Ground Signals, glue and paints required to complete model.
£4.45
Warehouse: 4
Cardiff: 1, Plymouth: 1
Fast delivery from Warehouse.
(Product Ref 32301)
Part of the Ratio 'Quick Assembly' family of signals. These allow you to make home and distant signals quickly and easily. They include signal operating wire and lever. This kit enables you to replicate an LMS Round Post Distant Signal. Glue and paints required to complete model.
£12.10
Warehouse: 1
Fast delivery from Warehouse.
(Product Ref 32297)
A Gantry to support signals, such as the semaphore signals in our Advanced Construction packs Ref 466 (GWR), 476(LMS), 477(LNWR) and 486(LNER/SR). It can also be used to mount colour light signals, and route and platform indicators.
Kit contains the gantry structures only, additional signal posts and arms from the packs (above) are required to complete the model. Glue and paints required.
£4.45
Warehouse: 1
Bristol: 1, Cardiff: 1, Stroud: 2
Fast delivery from Warehouse.
(Product Ref 32306)
Advanced Construction Signals. Aimed at modellers with more experience, these kits enable you to custom make specific configurations of signals to suit your track layout and train paths.
This kit will make either 4 separate signals, or combinations of bracket signals.
It can also be used with the Pratt Truss Gantry kit (Ref 478) to provide over track signals. Glue and paints required to complete model.
£9.75
Warehouse: 1
Fast delivery from Warehouse.
(Product Ref 32307)
Single track crossing for a landowner whose property is on both sides of the railway line. Glue and paints required to complete model.
£6.25
Warehouse: 1
Fast delivery from Warehouse.
(Product Ref 32257)
Plastic model kit to construct a small hand-worked crane with a curved main supporting beam.

Cranes of this style were often used to load and unload open wagons, the curved main beam raising the height of the boom quickly, allowing the crane to swing over the wagon side.
£13.15
Warehouse: 1
Plymouth: 1
Fast delivery from Warehouse.
(Product Ref 32279)
Plastic kit to build a model of a simple hoist crane. Capable of lifting light loads like sacks and barrels. The hoist could be used free-standing, but would often be braced, mounted to the side of or inside a building to improve the load capacity.
£11.05
Warehouse: 1
Bristol: 1
Fast delivery from Warehouse.
(Product Ref 32289)
This kit replicates the precast concrete Southern Region example, often paired with the Concrete Hut (ref 518). A Fogman, when fog or snow reduced visibility, placed detonators on the rails ahead of signals or temporary speed restrictions imposed due to works etc. to provide additional warning to train drivers. The kit also includes a set of platelayers tools. Glue and paint are required to complete this kit. Footprint 20mm x 15mm.
£8.15
Warehouse: 1
Bristol: 1, Gloucester: 1
Fast delivery from Warehouse.
(Product Ref 30746)

Water trough set comprising sections of trough to construct a total length of 760mm (30in) of trough in your track and two lineside warning boards with lamps and servicing ladders.

The trough can easily be built to a shorter length, or extended by the addition of a second kit. The trough parts have been designed to allow clearance for tension-lock coupler arms. A water storage tank would normally be sited near to the troughs to maintain a supply of water, eg. Ratio water tower kit 506.

Water troughs were installed on many British mainlines to allow steam locomotives to refill their water tanks without needing to stop. A scoop was lowered from the locomotive or tender while running at speed, generating sufficient force to lift the water from the trough to the top of the tank or tender.

£11.00
Warehouse: 1
Fast delivery from Warehouse.
(Product Ref 83679)

This 20,000 gallon design is equally at home replenishing water troughs, a large motive power depot or supplying several platform mounted water cranes (See Ratio Water Crane and Fire Devil kit 413 and Peco LK-2 Water Cranes). Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. Footprint 122mm x 49mm

£20.95
Warehouse: 1
Fast delivery from Warehouse.
(Product Ref 3545)
Hand Rail Stanchions, Double Rail

Keep on the right side of health and safety regulations - use these double rail stanchions in locations wherever the general public are allowed. Pack contains 20 injection moulded supports and approx 2 x 400mm length of nickel silver railing.

£5.00

Cardiff: 1, Plymouth: 1
Delivery from stores takes a few days longer!
(Product Ref 83615)
Part of the Ratio 'Quick Assembly' family of signals. These allow you to make home and distant signals quickly and easily. They include signal operating wire and lever. This kit enables you to replicate a GWR Distant Signal. Kit includes pre-coloured signal arm, glue and paints required to complete model.
£12.10

Cardiff: 1, Plymouth: 1
Delivery from stores takes a few days longer!
(Product Ref 32294)

Part of the Ratio 'Quick Assembly' family of signals. These allow you to make home and distant signals quickly and easily. They include signal operating wire and lever. This kit enables you to replicate a GWR Home and Distant Signal. Kit includes pre-coloured signal arms, glue and paints required to complete model.

£14.30

Cardiff: 1
Delivery from stores takes a few days longer!
(Product Ref 32295)
Advanced Construction Signals. Aimed at modellers with more experience, these kits enable you to custom make specific configurations of signals to suit your track layout and train paths.
This kit contains 2 posts, 2 Home arms and 1 Distant.
It can also be used with the Pratt Truss Gantry kit (Ref 478) to provide over track signals. Glue and paints required to complete model.
£4.45

Bristol: 1, Plymouth: 1
Delivery from stores takes a few days longer!
(Product Ref 32303)
Advanced Construction Signals. Aimed at modellers with more experience, these kits enable you to custom make specific configurations of signals to suit your track layout and train paths.
This kit enables you to replicate a GWR Junction/Bracket Home signal. Glue and paints required to complete model.
£12.10

Bristol: 1
Delivery from stores takes a few days longer!
(Product Ref 9369)
Part of the Ratio 'Quick Assembly' family of signals. These allow you to make home and distant signals quickly and easily. They include signal operating wire and lever. This kit enables you to replicate a GWR Junction/Bracket signal, either as a Home, Distant or combined Home and Distant signal. Glue and paints required to complete model.
£13.50

Cardiff: 1
Delivery from stores takes a few days longer!
(Product Ref 32296)
Includes a lever, cord, screw eyes and return spring - everything you need to operate one turnout.
£4.15

Must be ordered - delivery as soon as possible.
(Product Ref 32363)
Advanced Construction Signals. Aimed at modellers with more experience, these kits enable you to custom make specific configurations of signals to suit your track layout and train paths.
This kit will make either 4 separate signals, or combinations of bracket signals plus 4 Ground Signals.
It can also be used with the Pratt Truss Gantry kit (Ref 478) to provide over track signals. Glue and paints required to complete model.
£9.75

Must be ordered - delivery as soon as possible.
(Product Ref 32302)
Part of the Ratio 'Quick Assembly' family of signals. These allow you to make home and distant signals quickly and easily. They include signal operating wire and lever. This kit enables you to replicate an LMS Round Post Home Signal. Glue and paints required to complete model.
£12.10

Must be ordered - delivery as soon as possible.
(Product Ref 30701)
Advanced Construction Signals. Aimed at modellers with more experience, these kits enable you to custom make specific configurations of signals to suit your track layout and train paths.
This kit will make either 4 separate signals, or combinations of bracket signals plus 4 Ground Signals.
It can also be used with the Pratt Truss Gantry kit (Ref 478) to provide over track signals. Glue and paints required to complete model.
£9.75

Must be ordered - delivery as soon as possible.
(Product Ref 32304)
Advanced Construction Signals. Aimed at modellers with more experience, these kits enable you to custom make specific configurations of signals to suit your track layout and train paths.
This kit will make either 4 separate signals, or combinations of bracket signals plus 4 Ground Signals.
It can also be used with the Pratt Truss Gantry kit (Ref 478) to provide over track signals. Glue and paints required to complete model.
£9.75

Must be ordered - delivery as soon as possible.
(Product Ref 32305)
The Southern Railway made good use of older and redundant lengths of bullhead rail, reusing it for many applications, such as sign posts, fencing posts, and of course, signals.
The Ratio model faithfully replicates the distinctive design of this signal and the previous range of signal kits has been combined into one multi-purpose kit. Cast metal parts from the previous kits have been replaced with new plastic items and the signals can be operated by wire and lever or servos (eg Peco SmatSwitch).

This kit can be built in one of three ways: home signal, distant signal, and a combined home and distant signal.
£15.40

Must be ordered - delivery as soon as possible.
(Product Ref 32300)
Have a question? Contact us