Propellors, Shafts & Bits for Boats

Hardware for radio control Boats,

£2.99
Warehouse: 2
Gloucester: 2
Fast delivery from Warehouse.
(Product Ref 59610)
This series is moulded in glass-filled nylon for improved strength and stiffness. Again, ideal for high speed electric and performance I/C drives and fast planing hulls. Moulded-in tapped brass inserts.
£1.50
Warehouse: 1
Gloucester: 1
Fast delivery from Warehouse.
(Product Ref 77080)
Using a standard blade pattern, these glass-filled nylon props have a much higher strength and rigidity than their nylon counterparts making them ideal for use with high power marine engines. Each prop features a moulded-in brass insert.
£1.50
Warehouse: 4
Fast delivery from Warehouse.
(Product Ref 63001)
Tidy up an R/C installation with one of these deck mounted aerials! This whip aerial replaces a receiver's standard aerial with a piano wire whip aerial.
£3.99
Warehouse: 1
Fast delivery from Warehouse.
(Product Ref 44500)
These steel shaft propeller shafts are supplied with a 4mm metric thread and with a brass bushed tube of 8mm diameter. Each end has a 4mm thread, nut and washer. To seal the shaft pack with vaseline or thick grease. The length quoted relates to the tube length, the shaft protrudes 1" from the tube
£8.50
Warehouse: 1
Fast delivery from Warehouse.
(Product Ref 77086)
These steel shaft propeller shafts are supplied with a 4mm metric thread and with a brass bushed tube of 8mm diameter. Each end has a 4mm thread, nut and washer. To seal the shaft pack with vaseline or thick grease. The length quoted relates to the tube length, the shaft protrudes 1" from the tube
£9.50
Warehouse: 1
Fast delivery from Warehouse.
(Product Ref 77087)
These tiller arms are moulded in glass filled nylon, with multiple mounting holes for adjustment. The closer to the centre that you connect your linkage, the less movement you'll get out of the rudder.
£1.85
Warehouse: 5
Fast delivery from Warehouse.
(Product Ref 42570)
Shiny brass rudders with brass rudder posts sleeved with a threaded glass filled nylon bearing tube. All brass nuts and retaining washers are supplied, together with a strong, glass filled nylon tiller arm. Available in six sizes to suit a wide variety of applications. Post Length 65mm.
£6.10
Warehouse: 1
Bristol: 1
Fast delivery from Warehouse.
(Product Ref 33174)
These steel shaft propeller shafts are supplied with a 4mm metric thread and with a brass bushed tube of 8mm diameter. Each end has a 4mm thread, nut and washer. To seal the shaft pack with vaseline or thick grease. The length quoted relates to the tube length, the shaft protrudes 1" from the tube
£9.99
Warehouse: 1
Fast delivery from Warehouse.
(Product Ref 77084)
£2.50
Warehouse: 2
Fast delivery from Warehouse.
(Product Ref 57045)
This series is moulded in glass-filled nylon for improved strength and stiffness. Again, ideal for high speed electric and performance I/C drives and fast planing hulls. Moulded-in tapped brass inserts.
£1.50

Gloucester: 3
Delivery from stores takes a few days longer!
(Product Ref 77077)
This series is moulded in glass-filled nylon for improved strength and stiffness. Again, ideal for high speed electric and performance I/C drives and fast planing hulls. Moulded-in tapped brass inserts.
£1.50

Gloucester: 1
Delivery from stores takes a few days longer!
(Product Ref 77079)
Designed for maximum performance when using high powered electric or I/C drives. These waterscrews, with their high pitch 'X' pattern blade shape, are ideal for fast planing hulls, and feature moulded-in brass inserts.
£1.50

Gloucester: 2
Delivery from stores takes a few days longer!
(Product Ref 54512)
Designed for maximum performance when using high powered electric or I/C drives. This waterscrew, with its high pitch 'X' pattern blade shape, is ideal for fast planing hulls, and features a moulded-in brass insert.
£1.50

Gloucester: 2
Delivery from stores takes a few days longer!
(Product Ref 51112)
Using a standard blade pattern, these glass-filled nylon props have a much higher strength and rigidity than their nylon counterparts making them ideal for use with high power marine engines. Each prop features a moulded-in brass insert.
£1.50

Cardiff: 1, Gloucester: 1
Delivery from stores takes a few days longer!
(Product Ref 63002)
Using a standard blade pattern, these glass-filled nylon props have a much higher strength and rigidity than their nylon counterparts making them ideal for use with high power marine engines. Each prop features a moulded-in brass insert.
£1.50

Bristol: 1
Delivery from stores takes a few days longer!
(Product Ref 63000)
£1.65

Cardiff: 1
Delivery from stores takes a few days longer!
(Product Ref 103580)
£1.65

Cardiff: 4
Delivery from stores takes a few days longer!
(Product Ref 103579)
£9.85

Gloucester: 1
Delivery from stores takes a few days longer!
(Product Ref 41076)
Comprising of a brass rudder riveted to shaft. Glass filled nylon outer bearing, brass nut and washer, rubber sealing ring, glass-filled tiller arm with clamp fitting.

Mirco rudder blade.

£4.95

Bristol: 1, Cardiff: 1, Gloucester: 1
Delivery from stores takes a few days longer!
(Product Ref 40643)
£4.95

Cardiff: 1, Gloucester: 2
Delivery from stores takes a few days longer!
(Product Ref 40642)
Shiny brass rudders with brass rudder posts sleeved with a threaded glass filled nylon bearing tube. All brass nuts and retaining washers are supplied, together with a strong, glass filled nylon tiller arm. Available in six sizes to suit a wide variety of applications. Post Length 50mm.
£5.20

Bristol: 1, Gloucester: 2
Delivery from stores takes a few days longer!
(Product Ref 33172)
Shiny brass rudders with brass rudder posts sleeved with a threaded glass filled nylon bearing tube. All brass nuts and retaining washers are supplied, together with a strong, glass filled nylon tiller arm. Available in six sizes to suit a wide variety of applications. Post Length 50mm.
£5.55

Bristol: 2, Gloucester: 2
Delivery from stores takes a few days longer!
(Product Ref 8177)
Shiny brass rudders with brass rudder posts sleeved with a threaded glass filled nylon bearing tube. All brass nuts and retaining washers are supplied, together with a strong, glass filled nylon tiller arm. Available in six sizes to suit a wide variety of applications. Post Length 65mm.
£5.80

Bristol: 1, Cardiff: 1, Gloucester: 2
Delivery from stores takes a few days longer!
(Product Ref 33173)
£2.50

Cardiff: 5, Gloucester: 5
Delivery from stores takes a few days longer!
(Product Ref 877)
Ripmax Couplings offer a flexible solution to joining marine propeller shafts to your electric motor. A flexible solution in more than one way, as the brass inserts are supplied separately so as to allow the builder to select the correct size for the job.
£2.50

Cardiff: 9
Delivery from stores takes a few days longer!
(Product Ref 29030)
Ripmax Couplings offer a flexible solution to joining marine propeller shafts to your electric motor. A flexible solution in more than one way, as the brass inserts are supplied seperatly so as to allow the builder to select the correct size for the job.
£2.50

Cardiff: 7, Gloucester: 3
Delivery from stores takes a few days longer!
(Product Ref 38540)
Ripmax Couplings offer a flexible solution to joining marine propeller shafts to your electric motor. A flexible solution in more than one way, as the brass inserts are supplied seperatly so as to allow the builder to select the correct size for the job.
£2.50

Bristol: 1, Cardiff: 6, Gloucester: 3
Delivery from stores takes a few days longer!
(Product Ref 54910)
Ripmax Couplings offer a flexible solution to joining marine propeller shafts to your electric motor. A flexible solution in more than one way, as the brass inserts are supplied separately so as to allow the builder to select the correct size for the job.
£2.50

Gloucester: 4
Delivery from stores takes a few days longer!
(Product Ref 41138)