OO Sectional Track

Ready to use rigid track sections for rapid track-laying.
Suitable for all OO and HO trains.

Recently expanded this book is now full of ideas for layouts and track plans, all designed using sectional track, based on the Peco system which is fully compatible with the Hornby track range.
Dozens of ideas are presented, ranging from realistic circuits to shunting yards based on prototype locations. Along with the layouts numerous hints and tips are provided, suggesting for example how to store spare trains behind the scenes. In many cases examples of scenery are suggested as a setting for the layout and trains by the use of buildings, ranging from city centres to industrial sites to countryside.

This plans book is recommended as s ource of ideas for new railway modellers and experienced layout builders looking for ideas for new scenes.

£3.50
Warehouse: 1
Bristol: 1, Gloucester: 3, Plymouth: 1
Fast delivery from Warehouse.
(Product Ref 31649)
Cookies are disabled.
To place an order please call 01453 377030

Standard length straight track section, length 168mm 6 5/8in.
Equivalent to the Hornby R600 and Bachmann 36-600 straight track.

This is the standard straight track length in the section track system, the same lengths is used by Bachmann, Hornby and Peco for their sectional track ranges. Track sections from all three manufacturers are fully compatible and can be used to expand the track supplied with train sets.
Sectional track standard points, Peco ST240/241 and Hornby R8072/8073 fit into the same track length along the straight side. The same length is also used for items like level crossings, making it easy to match up track lengths as you assemble a layout.

Peco use quality nickel-silver rail, providing good electrical contact and long lasting performance.

£1.80
Available to buy.
Cookies are disabled.
To place an order please call 01453 377030

Double length straight track section, length 335mm 13.25in.
Equivalent to Hornby R601 & Bachmann 36-601 double straight track.

£2.85
Warehouse: 9+
Bristol: 9+, Gloucester: 9+, Plymouth: 9+, Stroud: 4
Fast delivery from Warehouse.
(Product Ref 25594)
Cookies are disabled.
To place an order please call 01453 377030

Double length straight track section. Length 335mm

£2.85
Warehouse: 9+
Fast delivery from Warehouse.
(Product Ref 25570)
Cookies are disabled.
To place an order please call 01453 377030

Quad-length long straight track section, length 670mm (approx 26 3/8in).
Equivalent to Hornby R603 long straight track section.

This quad-length straight track section is ideal for creating long straight tracks quickly, for example when assembling long sidings, platform tracks and storage yards. The rigid Setrack structure helps ensure that straight tracks are easy to keep straight.

Peco Setrack track sections are fully compatable with Hornby and Bachmann track and are supplied with fishplates already fitted at both ends, ready for attachment to other track sections.

£4.65
Warehouse: 9+
Bristol: 9+, Gloucester: 3, Stroud: 9+
Fast delivery from Warehouse.
(Product Ref 60112)
Cookies are disabled.
To place an order please call 01453 377030

Short straight track, length 79mm (3.7.64in.)

A special straight section of track which is used to complete the connection of points and crossings, especially where a diamond crossing is used. The length is also suitable for equalising track lengths where longer points like the Hornby express points are used.
 
This track section can be used to gain a small extra length in sidings where another standard straight will not fit in the space available.

£1.55
Warehouse: 9+
Bristol: 3, Gloucester: 8, Plymouth: 9+, Stroud: 3
Fast delivery from Warehouse.
(Product Ref 25596)
Cookies are disabled.
To place an order please call 01453 377030

Special short straight track, length 41mm.
Equivalent to Hornby R610 and Bachmann 36-610 short straight track.

This track section is one quarter the length of a standard straight and is sometimes required to extend a track to complete a connection when curved points are used to form a crossover. If you look at the Peco Setrack diagram the ST-203 can be seen at the right-hand end of the lowest straight track section where it joins the curve, allowing for the use of the curved point in this curve further to the right on the diagram.

£1.55
Warehouse: 7
Bristol: 6, Gloucester: 8, Stroud: 5
Fast delivery from Warehouse.
(Product Ref 25597)
Cookies are disabled.
To place an order please call 01453 377030
Isolating track section with switch. Length 168mm (as ST200 and Hornby R600)

Isolating tracks are ideal for allowing locomotives and trains to be electrically isolated in sidings. This helps with storing trains and changing engines, as the engine which has passed the isolating track can be switched off, so won't move accidentally.

£4.35
Warehouse: 2
Gloucester: 6, Plymouth: 1, Stroud: 1
Fast delivery from Warehouse.
(Product Ref 25598)
Cookies are disabled.
To place an order please call 01453 377030

Standard curve section number 1 radius, 371mm (14 5/8in). 22.5 degree curve, 16 required to form a complete circle.
Equivalent to Hornby R604 standard No.1 radius track.

No.1 radius at 14 5/8in is the sharpest radius available in the OO track range and the sharpest radius which smaller OO model trains can be expected to travel round without derailing. Many large models, including large steam and diesle locomotives, modern passenger coaches and long wagons will not successfully negotiate a curve this sharp. We recommend using small locomotives and traditional short 4-wheel wagons on no.1 radius circuits.
Peco track uses durable and corrosion resistant nickel-silver rail for long lasting performance. Peco Setrack track sections are fully compatable with Hornby and Bachmann track and are supplied with fishplates already fitted at both ends, ready for attachment to other track sections.

£2.45
Warehouse: 9+
Bristol: 9+, Gloucester: 7, Plymouth: 9+, Stroud: 4
Fast delivery from Warehouse.
(Product Ref 25599)
Cookies are disabled.
To place an order please call 01453 377030
Pack of 8 standard curve at number 1 radius, 371mm (14 5/8in). 22.5 degree curve, This will form a half-circle.
Equivalent to Hornby R604 standard No.1 radius track.
No.1 radius at 14 5/8in is the sharpest radius available in the OO track range and the sharpest radius which smaller OO model trains can be expected to travel round without derailing. Note that many large models, including large steam and diesel locomotives, modern passenger coaches and long wagons will not successfully negotiate a curve this sharp. We recommend using small locomotives and traditional short 4-wheel wagons on no.1 radius circuits.

Peco track uses durable and corrosion resistant nickel-silver rail for long lasting performance. Peco Setrack track sections are fully compatable with Hornby and Bachmann track and are supplied with fishplates already fitted at both ends, ready for attachment to other track sections.

£18.50
Warehouse: 1
Bristol: 1
Fast delivery from Warehouse.
(Product Ref 91192)
Cookies are disabled.
To place an order please call 01453 377030

Double curve section number 1 radius, 371mm (14 5/8in). 45 degree curve, 8 required to form a complete circle.
Equivalent to Hornby R605 No.1 radius double curve.

Double curves are the quick way to create a circuit of track with a minimum of joints in the curves. Just 4 are needed to reverse direction at each end of an oval, with 8 forming a complete circle.

No.1 radius at 14 5/8in is the sharpest radius available in the OO track range and the sharpest radius which smaller OO model trains can be expected to travel round without derailing. Many large models, including large steam and diesel locomotives, modern passenger coaches and long wagons will not successfully negotiate a curve this sharp. We recommend using small locomotives and traditional short 4-wheel wagons on no.1 radius circuits.
Peco track uses durable and corrosion resistant nickel-silver rail for long lasting performance. Peco Setrack track sections are fully compatable with Hornby and Bachmann track and are supplied with fishplates already fitted at both ends, ready for attachment to other track sections.

£3.10
Warehouse: 9+
Bristol: 9+, Cardiff: 3, Gloucester: 9+, Plymouth: 9, Stroud: 8
Fast delivery from Warehouse.
(Product Ref 25600)
Cookies are disabled.
To place an order please call 01453 377030

Standard curve section number 2 radius. 438mm 17 1/4in radius. 22.5 degree curve, 16 required to form a complete circle.
Equivalent to Hornby R606 and Bachmann 36-605 2nd radius curves..

Number 2 is the standard curve radius used for OO train sets and the minimum radius which large locomotives, coaches and wagons will successfully travel around. Almost all British ready-to-run models are designed to navigate no.2 radius curves as supplied. Peco, Bachmann and Hornby standard points use no.2 radius for the curved arm of the point, allowing a point can be substituted for one standard curve to create a siding. The standard curve is also used with a point to bring the diverging track back to parallel with the straight route.

Peco track uses durable and corrosion resistant nickel-silver rail for long lasting performance.
Peco Setrack track sections are fully compatable with Hornby and Bachmann track and are supplied with fishplates already fitted at both ends, ready for attachment to other track sections.

£2.60
Warehouse: 8
Bristol: 3, Cardiff: 9+, Gloucester: 9, Plymouth: 9+, Stroud: 9
Fast delivery from Warehouse.
(Product Ref 25602)
Cookies are disabled.
To place an order please call 01453 377030
Peco OO Pack of 8 ST-225 2nd Radius Standard Curves ST-2025
Pack of 8 standard curve at number 2 radius. 438mm 17 1/4in radius. 22.5 degree curve. This will for a half-circle.
Equivalent to Hornby R606 and Bachmann 36-605 2nd radius curves.

Number 2 is the standard curve radius used for OO train sets and the minimum radius which large locomotives, coaches and wagons will successfully travel around. Almost all British ready-to-run models are designed to navigate no.2 radius curves as supplied. Peco, Bachmann and Hornby standard points use no.2 radius for the curved arm of the point, allowing a point can be substituted for one standard curve to create a siding. The standard curve is also used with a point to bring the diverging track back to parallel with the straight route.

Peco track uses durable and corrosion resistant nickel-silver rail for long lasting performance.
Peco Setrack track sections are fully compatable with Hornby and Bachmann track and are supplied with fishplates already fitted at both ends, ready for attachment to other track sections.

£19.45
Warehouse: 2
Gloucester: 1
Fast delivery from Warehouse.
(Product Ref 93810)
Cookies are disabled.
To place an order please call 01453 377030

Double curve section number 2 radius. 438mm 17 1/4in radius, 45 degree curve, 8 required to form a complete circle.
Equivalent to Hornby R607 and Bachmann 36-607 2nd radius double curve tracks.

£3.30
Warehouse: 9+
Bristol: 9+, Cardiff: 9+, Gloucester: 9+, Plymouth: 9, Stroud: 9+
Fast delivery from Warehouse.
(Product Ref 25603)
Cookies are disabled.
To place an order please call 01453 377030
Standard curve section number 3 radius 505mm 19 7/8in. 22.5 degree curve, 16 required to form a complete circle.
Equivalent to Hornby R608 and Bachmann 36-608 3rd radius curved track.

The larger number 3 radius is designed to construct a circuit around the outside of a circuit at No.2 radius, with the track spacing set so that two left-hand or right-hand points will form a cross-over between the two circuits. Larger radius curves allow trains to run safely at higher speeds without derailment.

Peco track is manufactured in Great Britain using quality nickel-silver rail which offers good electrical conductivity and corrosion resistance. Setrack track is supplied with fishplates already fitted and is compatible with the track supplied with Hornby and Bachmann train sets.

£2.75
Warehouse: 9+
Bristol: 9+, Cardiff: 9+, Gloucester: 9+, Plymouth: 9+, Stroud: 9+
Fast delivery from Warehouse.
(Product Ref 25606)
Cookies are disabled.
To place an order please call 01453 377030
Pack of 8 standard curves at number 3 radius, 505mm 19 7/8in. 22.5 degree curve, this is sufficient for a half circle.
Equivalent to Hornby R608 and Bachmann 36-608 3rd radius curved track.

The larger number 3 radius is designed to construct a circuit around the outside of a circuit at No.2 radius, with the track spacing set so that two left-hand or right-hand points will form a cross-over between the two circuits. Larger radius curves allow trains to run safely at higher speeds without derailment.

Peco track is manufactured in Great Britain using quality nickel-silver rail which offers good electrical conductivity and corrosion resistance. Setrack track is supplied with fishplates already fitted and is compatible with the track supplied with Hornby and Bachmann train sets.

£20.60
Warehouse: 1
Bristol: 1, Gloucester: 1, Stroud: 3
Fast delivery from Warehouse.
(Product Ref 93831)
Cookies are disabled.
To place an order please call 01453 377030

Double curve section number 3 radius 505mm 19 7/8in. 45 degree curve, 8 required to form a complete circle.
Equivalent to Hornby R609 and Bachmann 36-609 3rd radius double curve tracks.

Double curve sections allow ciruits to be created quickly with a minimum of joins between the curved sections. The larger number 3 radius is designed to construct a circuit around the outside of a circuit at No.2 radius, with the track spacing set so that two left-hand or right-hand points will form a cross-over between the two circuits. Larger radius curves allow trains to run safely at higher speeds without derailment. Double curves allow circuits to be contructed quickly with a minimum of rail joints.
Peco track is manufactured in Great Britain using quality nickel-silver rail which offers good electrical conductivity and corrosion resistance. Setrack track is supplied with fishplates already fitted and is compatible with the track supplied with Hornby and Bachmann train sets.

£3.55
Available to buy.
Cookies are disabled.
To place an order please call 01453 377030

Setrack curve no.4 radius, 22.5in. 22.5 degree section, 16 required for a complete circle.
Equivalent to Hornby R8261 4th radius curved track.

This large radius curve is ideal for large locomotives and express trains while retaining the features of section track, including common geometry allowing the use of standard points for crossovers and fishplates ready fitted to every track section.

Peco track is manufactured in Great Britain using quality nickel-silver rail which offers good electrical conductivity and corrosion resistance. Setrack track is supplied with fishplates already fitted and is compatible with the track supplied with Hornby and Bachmann train sets.

£2.95
Warehouse: 8
Bristol: 1, Cardiff: 9+, Gloucester: 1, Plymouth: 6, Stroud: 9+
Fast delivery from Warehouse.
(Product Ref 64056)
Cookies are disabled.
To place an order please call 01453 377030

Half curve section number 1 radius 371mm (14 5/8in). 11.25 degree curve, 32 required to form a complete circle.

A half curve section is sometimes needed to realign tracks parallel, for example where a Y point is used to split a track into two tracks. We would recommend using a larger radius track if at all possible, as trains may not reliably cope with sharp changes in direction on this very tight radius track.
Peco Setrack track sections are fully compatable with Hornby and Bachmann track and are supplied with fishplates already fitted at both ends, ready for attachment to other track sections.

£1.80
Warehouse: 3
Bristol: 3, Cardiff: 9+, Gloucester: 9+, Plymouth: 9+, Stroud: 9+
Fast delivery from Warehouse.
(Product Ref 25601)
Cookies are disabled.
To place an order please call 01453 377030

Half curve section number 2 radius 438mm (17 1/4in). 11.25 degree curve, 32 required to form a complete circle.
Equivalent to Hornby R643 and Bahcmann 36-643 half curve.

This half curve track has a number of uses, but the main one is to create a cross-over using curved points to link a no.2 radius circuit to a no.3 radius circuit outside of it. The ST-227 section fits between the two curved points to create the connection, as seen in the lower right corner of the Peco Setrack geometry diagram.
Peco Setrack track sections are fully compatable with Hornby and Bachmann track and are supplied with fishplates already fitted at both ends, ready for attachment to other track sections.

£1.80
Warehouse: 9+
Bristol: 5, Gloucester: 1, Plymouth: 9+, Stroud: 9+
Fast delivery from Warehouse.
(Product Ref 25604)
Cookies are disabled.
To place an order please call 01453 377030
Equivalent to Hornby R8073 right hand point.

The standard points for most small/medium layouts, ST-240 (RH) and ST-241 (LH) points are compact, superior quality and drop in replacements for the Hornby equivalent. They can be easily motorised, either from above or below the baseboard with PL-10 under-track or PL-11 surface mounted point motors.

£12.75
Warehouse: 5
Bristol: 6, Cardiff: 3, Gloucester: 8, Plymouth: 4, Stroud: 4
Fast delivery from Warehouse.
(Product Ref 25610)
Cookies are disabled.
To place an order please call 01453 377030
The standard points for most small/medium layouts, ST-240 (RH) and ST-241 (LH) points are compact, superior quality and drop in replacements for the Hornby equivalent. They can be easily motorised, either from above or below the baseboard with PL-10 under-track or PL-11 surface mounted point motors.
Equivalent to Hornby R8072 left hand point.

£12.75
Warehouse: 6
Bristol: 5, Cardiff: 7, Gloucester: 7, Plymouth: 4, Stroud: 3
Fast delivery from Warehouse.
(Product Ref 25611)
Cookies are disabled.
To place an order please call 01453 377030
Right hand Setrack curved turnout with insulated frog. Internal radius 438mm 17 1/4in (no. 2 radius), external radius to match no.3 radius.
Equivalent to Hornby R8074 curved point.

Curved points allow for junctions and crossovers to be placed on the curves at the ends of layout ovals. The curved junction created in the crossover configuration eliminates the reverse curve created by the straight points, making the junction much smoother in appearance and for your trains. Half curve sections ST-227 are used to connect the points and track oval, special straight ST-203 unit may be required to compensate the slightly larger radius of the points' outer curve when rejoining straight track. Please see the Peco Setrack track diagram, the curved points are found in the bottom right-hand corner of the diagram.

Templates for Peco points are available from the Peco website.

£19.45
Warehouse: 2
Bristol: 2, Gloucester: 4, Plymouth: 1
Fast delivery from Warehouse.
(Product Ref 25612)
Cookies are disabled.
To place an order please call 01453 377030
Left hand Setrack curved turnout with insulated frog. Internal radius 438mm 17 1/4in (no. 2 radius), external radius to match no.3 radius.
Equivalent to Hornby R8075 curved point.

Curved points allow for junctions and crossovers to be placed on the curves at the ends of layout ovals. The curved junction created in the crossover configuration eliminates the reverse curve created by the straight points, making the junction much smoother in appearance and for your trains. Half curve sections ST-227 are used to connect the points and track oval, special straight ST-203 unit may be required to compensate the slightly larger radius of the points' outer curve when rejoining straight track. Please see the Peco Setrack track diagram, the curved points are found in the bottom right-hand corner of the diagram.

Templates for Peco points are available from the Peco website.

£19.45
Warehouse: 1
Bristol: 1, Gloucester: 4
Fast delivery from Warehouse.
(Product Ref 25614)
Cookies are disabled.
To place an order please call 01453 377030

Setrack Y turnout with insulated frog. Both diverging tracks are curved in this turnout. Special curve ST-222 is required to create parallel tracks.

Equivilent to Hornby R8076 Y point.

Radius 33 27/32in (859.6mm), angle 11.25 degrees, length 170mm (6 11/16in).

Templates for Peco points are available from the Peco website.

£14.50
Warehouse: 6
Cardiff: 1, Gloucester: 1, Plymouth: 1, Stroud: 2
Fast delivery from Warehouse.
(Product Ref 25615)
Cookies are disabled.
To place an order please call 01453 377030
Special curved track section for use with Y turnout ST-247. Radius 859.6mm (33 27/32in). 11.25 degree curve, 32 required to form a complete circle.

This track section is designed to be the opposite of the Y point, such that a Y point dividing one track into two, followed by one of these curves connected to  each leg of the Y will result in two parallel tracks.
£2.50
Warehouse: 3
Cardiff: 9+, Gloucester: 2, Plymouth: 2
Fast delivery from Warehouse.
(Product Ref 25608)
Cookies are disabled.
To place an order please call 01453 377030
A standard straight track with power connection. Suitable for 12-volt and live steam power connection.
£9.95
Warehouse: 9+
Bristol: 2, Plymouth: 1
Fast delivery from Warehouse.
(Product Ref 36740)
Cookies are disabled.
To place an order please call 01453 377030
Hornby OO gauge R8075 right hand curved point


£18.99
Warehouse: 4
Fast delivery from Warehouse.
(Product Ref 25619)
Cookies are disabled.
To place an order please call 01453 377030

Hornbys' semi-flexible track has fewer cuts in the sleeper base providing greater regidity to the track while still allowing curves to be formed where required.
Length 915mm (3 feet)

Please note that flex track exceeds the maximum length allowed for Royal Mail delivery and will be sent by courier service. 

£4.99
Warehouse: 9+
Fast delivery from Warehouse.
(Product Ref 25631)
Cookies are disabled.
To place an order please call 01453 377030
£2.59
Warehouse: 9+
Cardiff: 2, Stroud: 2
Fast delivery from Warehouse.
(Product Ref 25576)
Cookies are disabled.
To place an order please call 01453 377030
Useful for sidings and storage tracks with a radius of 852mm! Create parallel tracks with two R628 special curves. Drop in replacement for Hornby and Peco settrack Y points.
£9.50
Warehouse: 9+
Bristol: 2, Cardiff: 1, Gloucester: 2, Plymouth: 4, Stroud: 4
Fast delivery from Warehouse.
(Product Ref 25622)
Cookies are disabled.
To place an order please call 01453 377030
Radius 852mm, for use with R632 Y point
£2.95
Warehouse: 7
Gloucester: 2, Stroud: 1
Fast delivery from Warehouse.
(Product Ref 25586)
Cookies are disabled.
To place an order please call 01453 377030
Peco OO Straight Level Crossing With Gates ST-268
Complete straight level crossing unit comprising a standard length track section with roadway moulding, two approach ramps and a set of level crossing gates.
£10.25
Warehouse: 1
Gloucester: 1
Fast delivery from Warehouse.
(Product Ref 31658)
Cookies are disabled.
To place an order please call 01453 377030

Straight add-on level crossing unit with a standard length track set into the road surface moulding. The add-on unit can be fitted to either side of the straight level crossing ST-268 to create a multi-track crossing. Note that add-on units are not supplied with gates, these are supplied with the complete crossing set only.

£5.45
Warehouse: 2
Stroud: 2
Fast delivery from Warehouse.
(Product Ref 31659)
Cookies are disabled.
To place an order please call 01453 377030
Length 168mm, radius 438mm, to run tracks parallel use R606 2nd radius curve
£13.20
Warehouse: 9+
Stroud: 2
Fast delivery from Warehouse.
(Product Ref 2351)
Cookies are disabled.
To place an order please call 01453 377030
Complete single track curved level crossing unit comprising a standard No.1 radius curved track section with roadway moulding, two approach ramps and a set of level crossing gates.
The level crossing uses a curved track the same length as the standard ST-220 track and fitted with the same nickel-silver rail complete with fishplates.
Multi-track level crossings can be created by connecting add-on track units between the gates on one side.
£10.15
Warehouse: 1
Cardiff: 1
Fast delivery from Warehouse.
(Product Ref 31657)
Cookies are disabled.
To place an order please call 01453 377030
With traditional gates & modern barriers, with track moulded in to base (R600), length 168mm
£30.45
Warehouse: 1
Fast delivery from Warehouse.
(Product Ref 2348)
Cookies are disabled.
To place an order please call 01453 377030
Equivalent to the Hornby R600 and Bachmann 600 straight track.
This is the standard straight track length in the section track system, the same lengths is used by Bachmann, Hornby and Peco for their sectional track ranges. Track sections from all three manufacturers are fully compatible and can be used to expand the track supplied with train sets.
Sectional track standard points, Peco ST240/241 and Hornby R8072/8073 fit into the same track length along the straight side. The same length is also used for items like level crossings, making it easy to match up track lengths as you assemble a layout.
Peco use quality nickel-silver rail, providing good electrical contact and long lasting performance.
£13.50

Gloucester: 1
Delivery from stores takes a few days longer!
(Product Ref 31836)
Cookies are disabled.
To place an order please call 01453 377030
Length 168mm (as R600), used to isolate track sections, can be wired via on - off switch.
£10.49

Gloucester: 1, Plymouth: 1
Delivery from stores takes a few days longer!
(Product Ref 25582)
Cookies are disabled.
To place an order please call 01453 377030
Peco OO Pack of 4 ST-231 3rd Radius Double Curves ST-2031
Pack of 4 double curves at number 3 radius, 505mm 19 7/8in. 22.5 degree curve, this is sufficient for a half circle.
Equivalent to Hornby R609 and Bachmann 36-609 3rd radius double curve tracks.

The larger number 3 radius is designed to construct a circuit around the outside of a circuit at No.2 radius, with the track spacing set so that two left-hand or right-hand points will form a cross-over between the two circuits. Larger radius curves allow trains to run safely at higher speeds without derailment.

Peco track is manufactured in Great Britain using quality nickel-silver rail which offers good electrical conductivity and corrosion resistance. Setrack track is supplied with fishplates already fitted and is compatible with the track supplied with Hornby and Bachmann train sets.

£13.40

Must be ordered - delivery as soon as possible.
(Product Ref 93833)
Cookies are disabled.
To place an order please call 01453 377030
Hornby OO Diamond Crossing L/H R614
Length 168mm x 181mm
£11.85

Gloucester: 3
Must be ordered - delivery as soon as possible.
(Product Ref 25579)
Cookies are disabled.
To place an order please call 01453 377030
This starter track pack contains sufficient track sections to construct an oval circuit, plus two points to allow sidings to be added.
This pack is a great way to start your own train set, add your controller locomotive, coaches and wagons to make up the train you want.

The two points supplied allow you to add sidings to your layout from the outset. Sidings let you shunt your trains, attach and detach wagons, or simply store one train while another train is running. The layout can be further expanded using Peco Setrack, or the similar sectional track from Hornby and Bachmann, all these ranges using the same rail and fishplate connectors.

A track plans book is supplied with the set, full of ideas and suggestions for interesting layouts. Base oval layout requires a space of 1626 x 991mm 64 x 39 inch.

£72.50
MRP £80.00

Must be ordered - delivery as soon as possible.
(Product Ref 31650)
Cookies are disabled.
To place an order please call 01453 377030
This starter track pack contains sufficient track sections to construct an oval circuit, plus two points to allow sidings to be added. Supplied with 3rd radius curves the pack can be added to a Peco ST-100 track pack to form a second curcuit of track around the outside of the ST-100 track.
The two points supplied allow you to add sidings to your layout, or to form a crossover connection with another track circuit.
Sidings let you shunt your trains, attach and detach wagons, or simply store one train while another train is running. The layout can be further expanded using Peco Setrack, or the similar sectional track from Hornby and Bachmann, all these ranges using the same rail and fishplate connectors.
£67.50
MRP £74.50

Must be ordered - delivery as soon as possible.
(Product Ref 51964)
Cookies are disabled.
To place an order please call 01453 377030
A pack of 8 ST-201 double length straight track section, length 335mm 13.25in.
Equivalent to Hornby R601 & Bachmann 601 double straight track.
This track is double the length of the standard straight, ST-200/R600. The longer track section allows for plain straight track section to be assembled quickly and with fewer joints. Peco Setrack is ready fitted with fishplates and directly interchangeable with Hornby track, ideal for expanding the track supplied with train sets.
Peco use quality nickel-silver rail for good electrical contact and long lasting performance.
£21.50

Must be ordered - delivery as soon as possible.
(Product Ref 31837)
Cookies are disabled.
To place an order please call 01453 377030
Pack of 4 ST-202 short straights, length 79mm (3.7/64in.)
A special straight section of track which is used to complete the connection of points and crossings, especially where a diamond crossing is used. The length is also suitable for equalising track lengths where longer points like the Hornby express points are used.
This track section can be used to gain a small extra length in sidings where another standard straight will not fit in the space available.
£5.75

Must be ordered - delivery as soon as possible.
(Product Ref 31838)
Cookies are disabled.
To place an order please call 01453 377030
Pack of 4 ST-203 special short straight track, length 41mm (1.5/8in.).
Equivalent to Hornby R610 and Bachmann 36-610 short straight track.
This track section is one quarter the length of a standard straight and is sometimes required to extend a track to complete a connection when curved points are used to form a crossover. If you look at the Peco Setrack diagram the ST-203 can be seen at the right-hand end of the lowest straight track section where it joins the curve, allowing for the use of the curved point in this curve further to the right on the diagram.
£5.75

Must be ordered - delivery as soon as possible.
(Product Ref 31839)
Cookies are disabled.
To place an order please call 01453 377030
Pack of 2 isolating straight track sections with switches. Length 168mm (6.5/8in) as ST200 and Hornby R600.
Isolating tracks are ideal for allowing locomotives and trains to be electrically isolated in sidings. This helps with storing trains and changing engines, as the engine which has passed the isolating track can be switched off, so won't move accidentally.
£8.30

Must be ordered - delivery as soon as possible.
(Product Ref 31840)
Cookies are disabled.
To place an order please call 01453 377030
Pack of 4 double curves at number 1 radius, 371mm (14 5/8in). 22.5 degree curve, This will form a half-circle.
Equivalent to Hornby R605 No.1 radius double curve track.

No.1 radius at 14 5/8in is the sharpest radius available in the OO track range and the sharpest radius which smaller OO model trains can be expected to travel round without derailing. Note that many large models, including large steam and diesel locomotives, modern passenger coaches and long wagons will not successfully negotiate a curve this sharp. We recommend using small locomotives and traditional short 4-wheel wagons on no.1 radius circuits.
Peco track uses durable and corrosion resistant nickel-silver rail for long lasting performance. Peco Setrack track sections are fully compatable with Hornby and Bachmann track and are supplied with fishplates already fitted at both ends, ready for attachment to other track sections.

£11.50

Must be ordered - delivery as soon as possible.
(Product Ref 91193)
Cookies are disabled.
To place an order please call 01453 377030
Peco OO Pack of 4 ST-226 2nd Radius Double Curves ST-2026
Pack of 4 double curves at number 2 radius. 438mm 17 1/4in radius. 22.5 degree curve. This will for a half-circle.
Equivalent to Hornby R607 and Bachmann 36-607 2nd radius double curve tracks.

Number 2 is the standard curve radius used for OO train sets and the minimum radius which large locomotives, coaches and wagons will successfully travel around. Almost all British ready-to-run models are designed to navigate no.2 radius curves as supplied. Peco, Bachmann and Hornby standard points use no.2 radius for the curved arm of the point, allowing a point can be substituted for one standard curve to create a siding. The standard curve is also used with a point to bring the diverging track back to parallel with the straight route.

Peco track uses durable and corrosion resistant nickel-silver rail for long lasting performance.
Peco Setrack track sections are fully compatable with Hornby and Bachmann track and are supplied with fishplates already fitted at both ends, ready for attachment to other track sections.

£12.40

Must be ordered - delivery as soon as possible.
(Product Ref 93829)
Cookies are disabled.
To place an order please call 01453 377030
Pack of 8 standard curves at number 4 radius, this is sufficient for a half circle.
Equivalent to Hornby R8261 4th radius curved track.

This large radius curve is ideal for large locomotives and express trains while retaining the features of section track, including common geometry allowing the use of standard points for crossovers and fishplates ready fitted to every track section.

Peco track is manufactured in Great Britain using quality nickel-silver rail which offers good electrical conductivity and corrosion resistance. Setrack track is supplied with fishplates already fitted and is compatible with the track supplied with Hornby and Bachmann train sets.
£21.75

Must be ordered - delivery as soon as possible.
(Product Ref 93832)
Cookies are disabled.
To place an order please call 01453 377030
Pack of 2 special curved track sections for use with Y turnout ST-247. Radius 859.6mm (33 27/32in). 11.25 degree curve.

This track section is designed to be the opposite of the Y point, such that a Y point dividing one track into two, followed by one of these curves connected to  each leg of the Y will result in two parallel tracks.
£5.30

Must be ordered - delivery as soon as possible.
(Product Ref 93916)
Cookies are disabled.
To place an order please call 01453 377030

Diamond crossing track section matches Peco Setrack and Hornby points.

Diamond crossings are used when one track crosses another at a junction. The crossing angle is set to the same angle as the track diverging from a point. Two ST-202 short straights are required to complete connection with other points and crossings along the diverging track.
Setrack/Insulfrog points are insulated such that power of the correct polarity is available along the track sections forming each route. Fishplates are ready fitted and electrical contacts are good. Nickel-Silver rail provides long lasting performance.

Templates for Peco points are available from the Peco website.

£12.25

Must be ordered - delivery as soon as possible.
(Product Ref 25616)
Cookies are disabled.
To place an order please call 01453 377030
Hornby OO Standard Straight Uncoupler/Re-railer Track R620
Length 168mm (as R600), used to uncouple rolling stock and will rerail any derailed trains as it passes
£7.35

Must be ordered - delivery as soon as possible.
(Product Ref 7308)
Cookies are disabled.
To place an order please call 01453 377030
£4.20

Must be ordered - delivery as soon as possible.
(Product Ref 69898)
Cookies are disabled.
To place an order please call 01453 377030
Complete single track curved level crossing unit comprising a standard No.2 radius curved track section with roadway moulding, two approach ramps and a set of level crossing gates.
The level crossing uses a curved track the same length as the standard ST-225 track and fitted with the same nickel-silver rail complete with fishplates.
Multi-track level crossings can be created by connecting add-on track units between the gates on one or both sides.
£10.75

Must be ordered - delivery as soon as possible.
(Product Ref 74802)
Cookies are disabled.
To place an order please call 01453 377030
Complete single track curved level crossing unit comprising a standard No.3 radius curved track section with roadway moulding, two approach ramps and a set of level crossing gates.
The level crossing uses a curved track the same length as the standard ST-230 track and fitted with the same nickel-silver rail complete with fishplates.
Multi-track level crossings can be created by connecting add-on track units between the gates on one side.
£11.40

Must be ordered - delivery as soon as possible.
(Product Ref 69181)
Cookies are disabled.
To place an order please call 01453 377030
Peco OO Level Crossing No.4 Radius Complete with Gates ST-267
Complete single track curved level crossing unit comprising a standard No.4 radius curved track section with roadway moulding, two approach ramps and a set of level crossing gates.
The level crossing uses a curved track the same length as the standard ST-235 track and fitted with the same nickel-silver rail complete with fishplates.
£12.00

Must be ordered - delivery as soon as possible.
(Product Ref 69182)
Cookies are disabled.
To place an order please call 01453 377030
With traditional & modern gates, fits to any straight track, length 168mm
£19.99

Must be ordered - delivery as soon as possible.
(Product Ref 2349)
Cookies are disabled.
To place an order please call 01453 377030
Curved level crossing add-on fitted with 2nd radius curved track section. Used with a curved level crossing base unit to construct a multiple track road crossings.
£5.45

Must be ordered - delivery as soon as possible.
(Product Ref 31660)
Cookies are disabled.
To place an order please call 01453 377030
Have a question? Contact us

Rigid track sections clip together and, with a carefully designed and consistent geometry a layout can quickly be assembled. Track is standard 16.5mm gauge using code 100 rail, the connectors and section lengths are interchangeable between Bachmann, Hornby and Peco. The system incorporates curves with up to four different radii, 2nd radius being the smallest radius suitable for all OO models and 1st radius suitable for sidings used by small shunting engines.
We stock the Peco Setrack range which is manufactured in Great Britain using quality nickel-silver rail, offering good electrical conductivity and corrosion resistance. Setrack track is supplied with fishplates already fitted and is compatible with the track supplied with Hornby and Bachmann train sets.

Hornby and Peco track geometry reference diagrams can be found here