Electronic train lighting and automatic train control units

A useful box pack containing a motor and gearbox assembly with a 9 piece gear set, control switch and wiring, steel wire and brass tube.<br>This set of components can be used for a multitude of purposes providing movement and animation to otherwise static features. The card wrapper provides a step-by-step guide to building the unit as a slow-action point motor as one suggestion and a useful assembly primer.<br><br>Ideal for operating items such as points, semaphore signals, water mills and level crossing gates in slow motion on Model Railways - or anything else your imagination and ingenuity allows. A great introduction to creating animated models!<br>
A useful box pack containing a motor and gearbox assembly with a 9 piece gear set, control switch and wiring, steel wire and brass tube.
This set of components can be used for a multitude of purposes providing movement and animation to otherwise static features. The card wrapper provides a step-by-step guide to building the unit as a slow-action point motor as one suggestion and a useful assembly primer.

Ideal for operating items such as points, semaphore signals, water mills and level crossing gates in slow motion on Model Railways - or anything else your imagination and ingenuity allows. A great introduction to creating animated models!
£7.50
Available: Gloucester: 2, Stroud: 1
(Product Ref #90196)
<p>A time controlled unit which can be used with any controller and stops a locomotive at a point on a line, reverses it and then stops it again at a second point, reversing the locomotive again. This repeats indefinitely. The duration of each sequence can be adjusted from approx 20-70 seconds.<br />Input: 16v A.C. at a maximum of 1.25 amps <span style="color: #ff0000;">Requires T1, M1 Transformer</span><br />Measurements: 109mm x 68mm x 20mm</p>

A time controlled unit which can be used with any controller and stops a locomotive at a point on a line, reverses it and then stops it again at a second point, reversing the locomotive again. This repeats indefinitely. The duration of each sequence can be adjusted from approx 20-70 seconds.
Input: 16v A.C. at a maximum of 1.25 amps Requires T1, M1 Transformer
Measurements: 109mm x 68mm x 20mm

£36.95
Pre-Order (Website:0)
(Product Ref #42012)
<p>A small unit providing an automatic stop and start facility which only requires one reed switch to be installed.<br />The locomotive decelerates for about 5 seconds after passing factory set. The time stopped can be adjusted from approx 20-70 seconds, the rate of deceleration is also adjustable.<br />Reed switch and magnet are included.<br />Input: 16v A.C. at a maximum of 1.25 amps <span style="color: #ff0000;">Requires T1, M1 Transformer</span><br />Measurements: 109mm x 68mm x 20mm</p>

A small unit providing an automatic stop and start facility which only requires one reed switch to be installed.
The locomotive decelerates for about 5 seconds after passing factory set. The time stopped can be adjusted from approx 20-70 seconds, the rate of deceleration is also adjustable.
Reed switch and magnet are included.
Input: 16v A.C. at a maximum of 1.25 amps Requires T1, M1 Transformer
Measurements: 109mm x 68mm x 20mm

£41.95
Pre-Order (Website:0)
(Product Ref #45362)
Gaugemaster Model 100 - Panel Mounted Single Track Controller 100<br />Single Track Panel Mount Controller for small gauges up to ˜OO. Input: 1 x 16v A.C. at 1.25 amps Requires T1, M1 transformer. Output: 1 x 12v D.C. at 1 amp controlled<br />Measurements: Panel: 70mm x 105mm x 28mm deep<br />Aperture: 43mm x 83mm x 25mm deep.
Gaugemaster Model 100 - Panel Mounted Single Track Controller 100
Single Track Panel Mount Controller for small gauges up to ˜OO. Input: 1 x 16v A.C. at 1.25 amps Requires T1, M1 transformer. Output: 1 x 12v D.C. at 1 amp controlled
Measurements: Panel: 70mm x 105mm x 28mm deep
Aperture: 43mm x 83mm x 25mm deep.
£39.95
Website: 1
(Product Ref #24099)
<p>Four Track Panel Mounted Controller for ‘N’, ‘OO’ and most small Gauges<br />Input: 4 x 16v A.C. at 1.25 amps each <span style="color: #ff0000;">Requires 2x T1 or 2x M1 Transformer</span><br />Output: 4 x 12v D.C. at 1 amp each controlled<br />Measurements: Panel: 217mm x 105mm x 28mm deep<br />Aperture: 84mm x 190mm x 25mm deep</p>

Four Track Panel Mounted Controller for ‘N’, ‘OO’ and most small Gauges
Input: 4 x 16v A.C. at 1.25 amps each Requires 2x T1 or 2x M1 Transformer
Output: 4 x 12v D.C. at 1 amp each controlled
Measurements: Panel: 217mm x 105mm x 28mm deep
Aperture: 84mm x 190mm x 25mm deep

£94.95
Pre-Order (Website:0)
(Product Ref #38382)
<p>Power controller designed specifically for use with large gauge models including gauge 1, G scale and LGB.</p>
<p>Output up to 20 volts DC</p>

Power controller designed specifically for use with large gauge models including gauge 1, G scale and LGB.

Output up to 20 volts DC

£99.95
Available: Bristol: 1
(Product Ref #46809)
Have a question? Contact us
Your browser is out-of-date!

Update your browser to view this website correctly. Update my browser now

×