Peco TT:120 Range

12mm gauge 1:120 TT scale
A pack of Peco N Gauge 24 Rail Joiners (Fishplates)
£3.00
Warehouse: 9+
Bristol: 9+, Cardiff: 9+, Gloucester: 4, Plymouth: 5, Stroud: 9+
Fast delivery from Warehouse.
(Product Ref 31980)
Cookies are disabled.
To place an order please call 01453 377030
Pack of 12 plastic insulating rail joiners for use with peco N gauge code 55 and 80 track.
£2.75
Warehouse: 9+
Bristol: 8, Cardiff: 9, Gloucester: 9+, Plymouth: 9+, Stroud: 6
Fast delivery from Warehouse.
(Product Ref 31981)
Cookies are disabled.
To place an order please call 01453 377030

Peco Streamline flexible track is supplied in 1 yard (914mm) lengths. The TT 120 range features a wood style sleeper base and uses the code 55 rail also used by the N gauge finescale range, featuring a 'double foot' design with the lower part of the rail hidden within the sleepers, providing a strong rail section wile maintaining scale appearance for flat-bottom rail.
Use Peco N finescale rail joiners SL-310 (metal) and SL-311 (insulating). Pack SL-1208 contains sleepers designed to fit beneath joints and maintain sleeper spacing at joints,

£4.95

Must be ordered - delivery as soon as possible.
(Product Ref 118503)
Cookies are disabled.
To place an order please call 01453 377030

Peco Streamline TT:120 12mm gauge right hand medium radius unifrog turnout. The TT:120 range using Pecos' code 55 rail to represent 113lb flatbottom rail. These points conform to NEM standards and are a close match to British Railways B6 turnout.
Length 180mm, nominal curve radius 922mm/36.3in, diverging angle 11.25 degrees.
Use Peco SL310 (metal) and SL-311 (insulated) rail joiners

£17.95

Must be ordered - delivery as soon as possible.
(Product Ref 118504)
Cookies are disabled.
To place an order please call 01453 377030
Peco Streamline TT:120 12mm gauge left hand medium radius unifrog turnout. The TT:120 range using Pecos' code 55 rail to represent 113lb flatbottom rail. These points conform to NEM standards and are a close match to British Railways B6 turnout.
Length 180mm, nominal curve radius 922mm/36.3in, diverging angle 11.25 degrees.
Use Peco SL310 (metal) and SL-311 (insulated) rail joiners
£17.95

Must be ordered - delivery as soon as possible.
(Product Ref 118505)
Cookies are disabled.
To place an order please call 01453 377030
Pack of additional wooden sleepers for Peco TT:120 12mm gauge track. These additional sleepers are designed to fit under the rail joiners at the end of each track section or point to maintain the sleeper spacing.
£1.95

Must be ordered - delivery as soon as possible.
(Product Ref 118507)
Cookies are disabled.
To place an order please call 01453 377030
Peco 12mm gauge TT scale rail-built buffer stops.
A moulded plastic kit each pack contains parts to built 4 buffer stops and includes 30mm lengths of dummy bullhead track.
£4.95

Must be ordered - delivery as soon as possible.
(Product Ref 118506)
Cookies are disabled.
To place an order please call 01453 377030
Peco TT:120 scale plastic model kit building a model of the signal box at Highley on the Severn Valley Railway.
Highley signal box was constructed by railway signalling suppliers McKenzie and Holland to their Type 3 design. Similar McKenzie & Holland boxes were built for many other railway companies, making this design suitable for any railway company, with just the paint needing to be chosen to suit the company house colours.
£14.95

Must be ordered - delivery as soon as possible.
(Product Ref 118508)
Cookies are disabled.
To place an order please call 01453 377030

A laser cut wood kit with plastic chimney pot details and glazing sheet building a generic type of small stone-built station building with platform canopy and lavatory extension based on the building at West Bay, Dorset.
Length 115mm, width 47mm, canopy projects 17mm.

£18.95

Must be ordered - delivery as soon as possible.
(Product Ref 118509)
Cookies are disabled.
To place an order please call 01453 377030

1:120 scale laser cut wood kit with plastic details and glazing sheet constructing a model of a stone built railways goods shed based on the shed at Bovey, South Devon. The doors can be fixed in either open or closed position and the interior features detailed stonework, roof rafters, loading platform and goods office.
Length 100mm, width 110mm

£18.95

Must be ordered - delivery as soon as possible.
(Product Ref 118510)
Cookies are disabled.
To place an order please call 01453 377030

Peco platform edge units for TT 1:120 scale with brick facing.
The Peco system uses platform edge sections which can be formed alongside the tracks, following any curves. A surface sheet (supplied separately) can then be cut to fit between the edge capping stones.
This pack contains 6 plain platform face sections with brick facing each 133mm (approx. 5¼in) to make a single platform face length of 798mm/31.4in. Matching platform ramps are supplied as pack LK-12105 with LK-12107 brick or LK-12108 concrete surfaces, or suitable card or plastic sheet platform surface materials from other manufacturers can be used.

£8.95

Must be ordered - delivery as soon as possible.
(Product Ref 118511)
Cookies are disabled.
To place an order please call 01453 377030
Peco platform edge units for TT 1:120 scale with stone facing.
The Peco system uses platform edge sections which can be formed alongside the tracks, following any curves. A surface sheet (supplied separately) can then be cut to fit between the edge capping stones.
This pack contains 6 plain platform face sections with stone facing each 133mm (approx. 5¼in) to make a single platform face length of 798mm/31.4in. Matching platform ramps are supplied as pack LK-12106 with LK-12107 brick or LK-12108 concrete surfaces, or suitable card or plastic sheet platform surface materials from other manufacturers can be used.
£8.95

Must be ordered - delivery as soon as possible.
(Product Ref 118512)
Cookies are disabled.
To place an order please call 01453 377030
Peco platform ramp edge units for TT 1:120 scale with brick facing.
The Peco system uses platform edge sections which can be formed alongside the tracks, following any curves. A surface sheet (supplied separately) can then be cut to fit between the edge capping stones.
This pack contains 4 ramp sections, comprising 2 handed pairs, with brick facing each 75mm (approx. 3in) for use with brick faced platform sections LK-12103 with LK-12107 brick or LK-12108 concrete surfaces, or suitable card or plastic sheet platform surface materials from other manufacturers can be used.
£6.95

Must be ordered - delivery as soon as possible.
(Product Ref 118513)
Cookies are disabled.
To place an order please call 01453 377030
Peco platform ramp edge units for TT 1:120 scale with stone facing.
The Peco system uses platform edge sections which can be formed alongside the tracks, following any curves. A surface sheet (supplied separately) can then be cut to fit between the edge capping stones.
This pack contains 4 ramp sections, comprising 2 handed pairs, with stone facing each 75mm (approx. 3in) for use with stone faced platform sections LK-12104 with LK-12107 brick or LK-12108 concrete surfaces, or suitable card or plastic sheet platform surface materials from other manufacturers can be used.
£6.95

Must be ordered - delivery as soon as possible.
(Product Ref 118514)
Cookies are disabled.
To place an order please call 01453 377030
£5.75

Must be ordered - delivery as soon as possible.
(Product Ref 118515)
Cookies are disabled.
To place an order please call 01453 377030
£5.75

Must be ordered - delivery as soon as possible.
(Product Ref 118516)
Cookies are disabled.
To place an order please call 01453 377030
Have a question? Contact us