StarTec ST201 Soldering Station & Tools 30W 3 in 1 Temperature Controlled

775-10 30W 3 in 1 Temperature Controlled Soldering Station.

A fantastic 3 in 1 soldering station - suitable for modelling, soldering and pyrography.
For mains operation - fitted with a British plug.
Soldering iron 24V/30W.
Soldering iron stand.
Complete with 6 tips
Full instruction manual included.

Manufactured in Germany

£81.95

MRP £81.95

This product is no longer available.

(Product Ref 55073)

Have a question about this product? Let us know

Technical Data:
Operating Voltage: 230V - 50 Hz
Output Voltage 24V
Performance: 30W
Temperature range approximately 50 - 500°C
Supplied with British plug

Have a question about this product? Let us know

Related Products

Sapphire 100 is an exciting solder which is designed for use on white-metal and similar alloys. We worked hard to make sure that its composition coexists better with brass than conventional 70 degree low melt solders, so while tinning is still recommended for larger joints this solder will work without pre-tinning so it is not always essential for smaller parts.Its low temperature gives the ability to solder quickly and well without heating up the white-metal too much. It reacts differently and it can be re-worked… Because unlike 70 degree solder it will not combine with the white-metal and produce a weak ‘sludge’, so joints end up stronger.Clean the white metal properly and use a good flux and you will also find it has much better flow and needs less per joint than conventional WM solder! We hope you like the way we present it – we often find that with bar solders even we cannot tell which one is which, so we cast it into a shape that makes it impossible to forget.

DCC Concepts Low Temperature Solder 100 DCS-S100

£12.95

Sapphire 145 is 0.8mm diameter solder with no peaking and which flows absolutely brilliantly. It has a very narrow melt range which makes quick joints on detail parts a pleasure, yet it flows exceptionally well for long seams on brass kits. Whilst we recommend that it is used with our Sapphire flux and no-clean flux, it also has a multiple flux core to assist wetting and flow. This specially formulated solder for brass or nickel silver kit assembly is simply the very best available anywhere! Sapphire 145 used by some of the best professional loco builders in the world simply because it works better!

DCC Concepts Easy Flow Detailing Solder 145 DCS-S145

£7.95

Sapphire 179 solder is 0.6mm diameter solder which flows absolutely brilliantly. It is perfect for brass, copper, wiring, trackwork, soldering to nickel silver or steel and it even solders spring steel and to 300 and 400 series stainless steel when used with the right flux. It has a very narrow melt range which makes dry joints a thing of the past. It has a multiple flux core to assist wetting and flow. Because it contains some silver it ts is a little more expensive than standard solders but we make no apology for that, as this specially formulated solder is simply the very best available anywhere! Sapphire 179 used by many electronics experts and some of the worlds best professional loco builders simply because it works better!Pack contents: Approx 3m

DCC Concepts Universal Solder 179 Degrees DCS-S179

£5.95

Liquid soldering flux for whitemetal.Liquid fluxes are an acidic solution used to help clean metal surfaces and assist with the bonding of solder to metal.

Gaugemaster White Metal Flux 50ml GM03

£7.50

Flux is used to aid the flow and adhesion of solder and very useful when de-soldering and re-soldering. A good general flux with the added advantage of its non-acidic composition. For use on nickle silver and white metal. Apply with a brush carefully. Neutalise and clean after soldering.

Gaugemaster Non Acid Safety Flux 60ml GM05

£7.50