Peco Streamline track and points features solid nickel-silver rail, providing excellent electrical conductivity and scale appearance. The robust moulded plastic sleeper bases feature wood grain effect sleepers and rail chairs or fixings appropriate for the bullhead or flat bottom rails.

All Peco O gauge track is manufactured to 32mm gauge for use with finescale wheels, as supplied with current models and kits.
Peco O Setrack Straight 400mm ST-700
Produced to the familiar Setrack format with rail joiners pre-attached the bull-head nickel-silver rail. The Setrack sections are produced with the same bull-head nickel as is used in the Streamline range of flexible track and points.
Length 400mm 15.5in.
£6.75
Website: 6
Available from shops: Stroud: 3
(Product Ref #8161)
Peco O Setrack 2nd Radius Curve ST-725
Produced to the familiar Setrack format with rail joiners pre-attached the bull-head nickel-silver rail. The Setrack sections are produced with the same bull-head nickel as is used in the Streamline range of flexible track and points.
Length 410mm 16in. Radius 1020mm 40.5in. Angle 22.5.
16 sections required to form a complete circle.
Radius suitable for most O gauge models. Care may be needed with large locomotives to check that leading/trailing truck wheels do not accidentally short on the chassis.
£7.20
Available from shops: Stroud: 1
(Product Ref #63084)
Peco ST-U750 O Gauge Setrack Point Right Hand
Peco Setrack O gauge points match with the current track sections, with a total length of 400mm (15 3/4in), curve radius of 1028mm (40in) and curve angle of 22.5 degrees, equating to the straight and curved Setrack sections.
£41.95
MRP £52.25you save £10.30
Available from shops: Cardiff: 1
(Product Ref #27471)
Peco ST-U751 O Gauge Setrack Point Left Hand
Peco Setrack O gauge points match with the current track sections, with a total length of 393.7mm (15 1/2in), curve radius of 1028mm (40in) and curve angle of 22.5 degrees, equating to the straight and curved Setrack sections.

£41.95
MRP £52.25you save £10.30
Website: 2
Available from shops: Cardiff: 1
(Product Ref #28588)
Peco O Streamline Flexitrack Code 124 Bullhead Nickel Silver 914mm SL-700BH
Peco Streamline code 124 bullhead rail section represents the chaired rail used widely in the UK throught the steam era. Rail has a long life and bullhead rail is still to be found on branchlines, freight lines and lightly used routes in addition to most heritage railways.
Streamline flexitrack is supplied in 1 yard lengths (914mm). The flexible moulded plastic sleeper base allows the track to be curved to suit the layout requirements while maintaining the correct gauge.
Peco SL10 (OO gauge) metal and SL11 insulating rail joiners can be used to connect code 124 bullhead rail and points.
£7.75
MRP £8.00you save £0.25
Website: 9+
Available from shops: Bristol: 8, Cardiff: 9+, Gloucester: 1, Stroud: 6
(Product Ref #31681)
Peco O Box of 12 Streamline Flexitrack Code 124 Bullhead Rail Nickel Silver 914mm SL-700BHB
Box of 12 yrads of Peco O Streamline Flexitrack Code 124 Bullhead Nickel Silver 914mm SL-700BH
Peco Streamline code 124 bullhead rail section represents the chaired rail used widely in the UK throught the steam era. Rail has a long life and bullhead rail is still to be found on branchlines, freight lines and lightly used routes in addition to most heritage railways.
Streamline flexitrack is supplied in 1 yard lengths (914mm). The flexible moulded plastic sleeper base allows the track to be curved to suit the layout requirements while maintaining the correct gauge.
Peco SL10 (OO gauge) metal and SL11 insulating rail joiners can be used to connect code 124 bullhead rail and points.
£76.95
MRP £96.00you save £19.05
Pre-Order (Website:0)
(Product Ref #98366)
A pack of 24 Peco sl10 fishplates (Rail Joiners) for connecting rail ends together. Provides both mechanical and electrical bonding. For use with Peco Code 100 rail (OO/HO and O-16.5/On30) and code 124 rail (O gauge bullhead track)
£2.65
Website: 9+
Available from shops: Bristol: 9+, Cardiff: 9+, Coventry: 6, Gloucester: 9+, Plymouth: 9+, Stroud: 9+
(Product Ref #25745)
pack of 12 Peco SL11 insulated rail joiners

For use with Peco Code 100 rail (OO/HO and O-16.5/On30) and code 124 rail (O gauge bullhead track)
£2.55
Website: 9+
Available from shops: Bristol: 9+, Cardiff: 3, Coventry: 9, Gloucester: 9+, Plymouth: 5, Stroud: 6
(Product Ref #25746)
Peco O Right Hand Turnout Medium Radius Code 124 Bullhead Electrofrog SL-E791BH
The standard Peco O gauge right hand turnout with bullhead rail.
Length 416mm (16 3/8in). Curve radius (nominal) 1828mm (72in / 6ft). Crossing angle 8 degrees (matches with diamond crossings and double slip turnouts)
Template for SL-E791BH right hand point.
£41.95
MRP £52.25you save £10.30
Website: 3
Available from shops: Cardiff: 1, Stroud: 1
(Product Ref #31687)
Peco O Left Hand Turnout Medium Radius Code 124 Bullhead Electrofrog SL-E792BH
The standard Peco O gauge right hand turnout with bullhead rail.
Length 416mm (16 3/8in). Curve radius (nominal) 1828mm (72in / 6ft). Crossing angle 8 degrees (matches with diamond crossings and double slip turnouts)
Template for SL-E792BH left hand point.
£41.95
MRP £52.25you save £10.30
Website: 3
Available from shops: Cardiff: 2, Stroud: 1
(Product Ref #31688)
Peco O Y Turnout Medium Radius Code 124 Bullhead Electrofrog SL-E797BH
Y turnouts with both diverging routes curved provides a larger curve radius. This can be used to advantage in creating the smooth flowing appearance of track laid out for high speed running.
Length 381mm (15in). Radius 144in (both sides curved). Crossing angle 8 degrees
Template for SL-E797BH Y point.
£52.25
Website: 1
Available from shops: Cardiff: 1
(Product Ref #31686)
Peco O Diamond Crossing Code 124 Bullhead Electrofrog SL-E794BH
Diamond crossing used in junctions where a diverging route crosses a parallel track.
The 8 degree crossing angle matches the 791 & 792 bull head rail points and double slip. The crossing is supplied in two halves which plug together.
Length 584mm (23in). Crossing angle 8 degrees.
Template for SL-E794BH diamond crossing.
£59.25
Pre-Order (Website:0)
(Product Ref #31689)

Slip turnouts combine a diamond crossing with a turnout, allowing a train to pass onto either of the diverging tracks.
These points were usually used in locations where many tracks converged and can prove useful on model railway layouts to reduce the length occupied by junctions.

Code 124 bullhead rail. Length 584mm (23in). Crossing angle 8 degrees. Polarity changeover switching is required to correctly energise the crossings for the route set.

Template for LE-E790BH double slip turnout.

£87.95
MRP £109.75you save £21.80
Pre-Order (Website:0)
(Product Ref #55457)
Peco O Curved Turnout Right Hand Electrofrog SL-E786BH
Curved O gauge turnout with Peco bullhead section nickel-silver rail with rail chair and bolt detailing.

Curve radii
Outside 3098mm / 122in / 10ft 2in.
Inside 1727mm / 68in / 5ft 8in.

Frog angle 8 degrees. Length 516mm / 20.31in.

Template for SL-E786BH curved point.

£65.25
Website: 2
(Product Ref #78401)
Peco O Curved Turnout Left Hand Electrofrog SL-E787BH
Curved O gauge turnout with Peco bullhead section nickel-silver rail with rail chair and bolt detailing.

Curve radii
Outside 3098mm / 122in / 10ft 2in.
Inside 1727mm / 68in / 5ft 8in.

Frog angle 8 degrees. Length 516mm / 20.31in.

Template for SL-E787BH curved point.

£65.25
Website: 1
(Product Ref #78133)

Catch turnouts are used in the 'real railway' to prevent collisions by derailing any vehicle which moves towards a route not set for it to pass before it obstructs another track and to derail trains running away in the wrong direction on gradients.
These aren't major problems for model railways, but this model of the catch turnout allows prototype track layouts to be recreated.

Code 124 bullhead rail. Length 210mm (8.25in).

Templates for left and right hand catch pioints.

£22.00
MRP £24.95you save £2.95
Pre-Order (Website:0)
(Product Ref #31684)

Catch turnouts are used in the 'real railway' to prevent collisions by derailing any vehicle which moves towards a route not set for it to pass before it obstructs another track and to derail trains running away in the wrong direction on gradients.
These aren't major problems for model railways, but this model of the catch turnout allows prototype track layouts to be recreated.

Code 124 bullhead rail. Length 210mm (8.25in).

Templates for left and right hand catch points./A>

£22.00
MRP £24.95you save £2.95
Available Soon (Website:0)
(Product Ref #31685)
New product under development

Peco O Gauge Streamline SL-713 Bullhead to Flat Bottom Transition Track

This short section of track matches Peco code 124 bullhead rail at one end and code 124 flat bottom rail at the other with the sleeper bases aligned to provide a level rail head. Detailing of the transition track includes the cranked fishplates required to connect the two differing rail sections.

This transition track allows modellers to connect bullhead and flat bottom rail, recreating the joints between the heavy section flat bottom rail, which has steadily been laid during track renewals on main lines since the 1960s and bullhead rail which has been retained on secondary lines, sidings etc. to be modelled.
£17.50
Pre-Order (Website:0)
(Product Ref #72562)
Peco O Streamline Flexitrack Code 143 Flat Bottom Nickel Silver 914mm SL-700FB
Peco code 143 flat bottom rail provides an excellent represntation of the heavy section flat bottom rail which has been progressively installed on principal routes in the UK since the 1950s.
Streamline flexitrack is supplied in 1 yard lengths (914mm). The flexible moulded plastic sleeper base allows the track to be curved to suit the layout requirements while maintaining the correct gauge.
Peco SL-710FB metal and SL-711FB insulating rail joiners are used to connect the code 143 flat bottom rail and points.
£7.70
MRP £7.95you save £0.25
Website: 6
Available from shops: Bristol: 7
(Product Ref #31683)
Conductive rail joiners for use with Peco code 143 flat bottom rail, as used in SL-700FB track and points SL-E791FB / SL-E792FB.
£3.40
Website: 5
Available from shops: Bristol: 4, Coventry: 1
(Product Ref #31693)
Insulating rail joiners for use with Peco code 143 flat bottom rail, as used in SL-700FB track and points SL-E791FB / SL-E792FB.
£2.75
Website: 7
(Product Ref #31694)
Peco O Right Hand Turnout Medium Radius Code 143 Flat Bottom Electrofrog SL-E791FB
The standard Peco O gauge right hand turnout with flat bottom rail.
Length 416mm (16 3/8in). Curve radius (nominal) 1828mm (72in / 6ft). Crossing angle 8 degrees.
Use SL-710 (metal) & SL-711 (insulating) rail joiners with flat bottom rail.
Template for SL-E791FB flat bottom rail right hand point.
£54.50
Pre-Order (Website:0)
(Product Ref #31690)
Peco O Left Hand Turnout Medium Radius Code 143 Flat Bottom Electrofrog SL-E792FB
The standard Peco O gauge right hand turnout with flat bottom rail.
Length 416mm (16 3/8in). Curve radius (nominal) 1828mm (72in / 6ft). Crossing angle 8 degrees.
Use SL-710 (metal) & SL-711 (insulating) rail joiners with flat bottom rail.
Template for SL-E792FB flat bottom rail left hand point.
£54.50
Pre-Order (Website:0)
(Product Ref #31691)
Rail built buffer stop kit. Moulded in plastic to avoid short-circuiting the track.
£2.55
Website: 4
Available from shops: Bristol: 5, Gloucester: 2, Stroud: 1
(Product Ref #31692)
Dummy cosmetic fishplates allow you to model the rail joints found in prototype track when using flexitrack. Suitable for use with bullhead or flatbottom rail.
£4.95
Website: 5
(Product Ref #67021)
Peco O Code 143 Flat Bottom Rail Nickel Silver (x6) IL-7FB
£13.50
Pre-Order (Website:0)
(Product Ref #48139)
Peco O Pandrol Clips IL-712
Pack of 100 moulded fastenings.
£5.25
Website: 4
(Product Ref #54198)
£3.10
Website: 1
(Product Ref #54196)
£3.45
Website: 5
(Product Ref #54197)
Pack of 100 (approx) chairs for bullhead rail code 124.
£4.65
Website: 1
(Product Ref #38034)
Have a question? Contact us
Your browser is out-of-date!

Update your browser to view this website correctly. Update my browser now

×