Replacement fluorescent tube for Expo 73960 pantograph arm magnifying lamp.

£9.95
Website: 1
(Product Ref #95212)
£2.95
Website: 1
Available from shops: Bristol: 5, Gloucester: 1
(Product Ref #4806)
Dual action quick ratchet clamps
£2.50
Website: 6
Available from shops: Bristol: 7, Cardiff: 5, Coventry: 3, Gloucester: 6, Stroud: 7
(Product Ref #5886)
25mm (approx 1in) jaw plastic G clamp
£2.50
Website: 5
Available from shops: Bristol: 6, Gloucester: 3, Stroud: 1
(Product Ref #368)
50mm (just under 2in) jaw plastic G clamp
£2.80
Website: 2
Available from shops: Coventry: 1, Gloucester: 2, Stroud: 2
(Product Ref #367)
75mm (just under 3in) jaw plastic G clamp
£3.25
Website: 9
Available from shops: Gloucester: 1, Stroud: 1
(Product Ref #365)
£5.00
Website: 1
Available from shops: Bristol: 2, Coventry: 2
(Product Ref #36716)
£3.25
Website: 1
Available from shops: Bristol: 1, Cardiff: 1, Coventry: 2, Gloucester: 1, Stroud: 1
(Product Ref #6625)
The ideal device for holding small components in position for fixing, complete with an adjustable magnifier so you can really see what you're doing. Highly recommended for those small soldering jobs where your fingers melt before the solder!
£6.95
Website: 5
Available from shops: Bristol: 4, Cardiff: 1, Gloucester: 1, Plymouth: 3, Stroud: 2
(Product Ref #512)
An indespensable aid for soldering electronics, model making etc. Adjustable joints with crocodile clamps and heavy cast-iron base for added stability
£8.95
Website: 2
Available from shops: Cardiff: 1, Gloucester: 2
(Product Ref #34826)

Helping hands with magnifier (2.5x magnification) and soldering iron stand.

£7.95
Website: 2
Available from shops: Bristol: 1
(Product Ref #35867)
Hand Magnifier with 2x & 4x Magnification
£3.75
Website: 4
Available from shops: Bristol: 9+, Cardiff: 3, Gloucester: 3, Plymouth: 2, Stroud: 2
(Product Ref #38441)
Table Extension & Clamp with cut-out for saw blade to pass through extension.
£6.95
Website: 1
(Product Ref #59928)

782-10 Excellent Quality Precision Flat Square - supplied in a wooden case.
INOX STEEL - DIN 875.
Size: 75 x 50mm.

£16.95
Website: 1
(Product Ref #39015)
2-inch metal right angle square. Make sure your model�corners are square.
£6.95
Website: 2
Available from shops: Bristol: 3, Cardiff: 2, Plymouth: 3
(Product Ref #31200)
£8.95
Website: 2
Available from shops: Bristol: 3, Cardiff: 3, Coventry: 1, Gloucester: 2, Plymouth: 1
(Product Ref #2857)
Superior ' pearl finish ' swivel vice with bench clamp
£16.95
Website: 1
Available from shops: Bristol: 2, Coventry: 1, Gloucester: 2
(Product Ref #29692)

Sprung loaded work holder vice for quickly and securely holding circular and irregular objects.
Maximum diameter 32mm.

£6.95
Website: 1
(Product Ref #82121)
An adjustable miulti-pose bench clamp, suitable for holding ship keels.
£19.95
Website: 2
Available from shops: Plymouth: 1
(Product Ref #22926)
£2.95
Website: 2
Available from shops: Bristol: 1, Cardiff: 3
(Product Ref #7437)

710-16 8PC MICRO CLAMP SET.
Miniature sprung clamps which are lightweight but very powerful.
Overall length: 60mm
Depth capacity: 24mm
Width capacity: 20mm.

£2.00
Website: 4
Available from shops: Bristol: 3, Cardiff: 4, Gloucester: 4, Stroud: 3
(Product Ref #39305)
A lightweight headband magnifier unit fitted with a torch light to provide strong, direct lighting on the area being viewed.
£9.95
Website: 2
Available from shops: Cardiff: 5, Gloucester: 2
(Product Ref #75473)

Scale: OO

Service your loco simply and easy with this new loco cradle. Will support your loco at 45, 90 degrees or completely upside down.

Unique rubber beds keep the loco held in the bench without damage.


£40.00
MRP £62.00you save £22.00
Website: 1
Available from shops: Gloucester: 1
(Product Ref #97400)
£3.25
Available from shops: Cardiff: 1, Gloucester: 2, Stroud: 1
(Product Ref #24893)
£3.95
Available from shops: Bristol: 2
(Product Ref #26876)
£3.50
Available from shops: Cardiff: 2
(Product Ref #6306)
£9.99
Available from shops: Gloucester: 2, Stroud: 1
(Product Ref #80959)
Headband magnifier with three separate lenses, allowing you to switch magnification strengths quickly. Combinations of the lenses allow magnification up to 4.8x to be obtained. The velcro adjustable headband fits all sizes.
£19.95
Available from shops: Bristol: 1
(Product Ref #7837)

Scale: OO N HO

Access all areas of your Loco with this new mechanical loco cradle from Proses. 
Adjustable for the length of your loco.

Holds and rotates your model with ease.

Unique rubber beds keep the loco held in the bench without damage.


£45.00
MRP £66.99you save £21.99
Available from shops: Gloucester: 1
(Product Ref #97401)
Snap & Glue Set Square
Another smart tool to help you building your kits.

A set of paired magnetic set squares.
Simply pull apart, place inside and outside your 90 degree corner and snap into place.
The snap and glue set squares hold the two pieces of plastic in place and allow you to glue them at the right angle without further worry.

Perfect for building kits and for wagon kits.
£18.95
Available from shops: Gloucester: 2
(Product Ref #71333)
75mm (just under 3in) jaw plastic G clamp
£3.25
Available Soon (Website:0)
(Product Ref #102305)
£6.00
Pre-Order (Website:0)
(Product Ref #42112)
£3.25
Pre-Order (Website:0)
(Product Ref #4399)
738-39 3.5 x Magnification Clip on Spectacle Magnifier
£3.95
Pre-Order (Website:0)
(Product Ref #62024)

738-69 Gooseneck Magnifier with Bench Clamp.

Lens Diameter: 90mm Magn: 2x
Flexible Arm: 530mm long.
Clamp capacity: 57mm.

Clamp has padded jaws to protect work surface.

£19.99
Pre-Order (Website:0)
(Product Ref #7443)
738-70 Gooseneck Magnifier with Heavy Desk Stand.

Lens Diameter: 90mm Magn: 2x
Flexible Arm: 180mm long.

£17.95
Pre-Order (Website:0)
(Product Ref #2490)
Precision fluorescent  magnifier
£59.95
Pre-Order (Website:0)
(Product Ref #28287)
£4.00
Pre-Order (Website:0)
(Product Ref #35494)

782-11 Excellent Quality Precision Flat Square - supplied in a wooden case.
INOX STEEL - DIN 875. Size: 100 x 70mm.

£18.95
Pre-Order (Website:0)
(Product Ref #33187)
£4.00
Pre-Order (Website:0)
(Product Ref #43990)

A well designed and innovative tool for building square cornered structures in plastic, from basic material or kits.

The snap & glue clamps use powerful magnets mounted into an inside and outside right-angles pair, holding the pieces meeting at the corner together and at right angles without needing additional support or a set-square. The tools have a cut-out at the actual corner, allowing adhesive to be applied by brush or applicator tube passing through the clamped points, with plenty of clearance to avoid liquid adhesive touching the clamps themselves.

Pack contains four pairs of inside and outside clamp units.

£31.95
Pre-Order (Website:0)
(Product Ref #102637)
Have a question? Contact us
Your browser is out-of-date!

Update your browser to view this website correctly. Update my browser now

×