Replacement 3-jaw micro chuck designed to take drills from 0.4 to 3.8mm diameters for Minicraft & Expo Drills. Internal thread 8mm fine.
£6.00
Website: 3
Available from shops: Bristol: 2
(Product Ref #49864)
Mini chuck for drill sizes from 0.3mm to 2.5mm. Chuck is mounted onto a hex-drive fitting allowing for use with cordless screwdrivers and larger drilling machines. Chuck width 17.2mm, overall length including shaft 51.5mm
£6.00
Website: 2
Available from shops: Cardiff: 2
(Product Ref #39304)
3 jaw pin chuck supplied with tommy bar, designed to hold drills from 0.5 mm to 3.8mm.
Shaft diameter 6.5mm, chuck width 18mm
overall length 64mm.
£7.00
Website: 4
Available from shops: Cardiff: 1, Coventry: 1, Stroud: 1
(Product Ref #26893)
holds drill sizes zero-2.4mm, chuck width 12.6mm, overall length 59mm, shaft diameter 6.3mm
£5.00
Website: 3
Available from shops: Bristol: 1, Gloucester: 3
(Product Ref #539)

holds drills zero-2.4mm, chuck width 12.6mm, overall length 59mm, 1/8" dia shaft making it suitable for use with most dremel & black and decker wizard style drills

 

£5.00
Website: 3
Available from shops: Coventry: 1
(Product Ref #9508)
Set of collet adaptors to allow drills between zero and 3mm to be held.
Shaft diameter 2.3mm, chuck width 10mm, overal length 67mm
£6.00
Website: 1
Available from shops: Bristol: 1
(Product Ref #3941)
Set Contains:
1 x Hex Drive Microchuck
1 x Microchuck with 2.35mm Shaft
1 each HSS Twist Drills:
0.5mm, 0.8mm and 1.00mm.

Can be used with a cordless screwdriver, standard DIY drill or bench drill.
Suitable for drill sizes: 0.1mm to 2.5mm.
£11.95
Website: 1
Available from shops: Bristol: 1, Cardiff: 1, Gloucester: 2, Plymouth: 2
(Product Ref #89507)

holds drill sizes zero - 0.85mm, chuck width 8.8mm, overall length including shaft 46.8mm.

Fitted with hex drive, as used on many powered screwdrivers etc.

£4.00
Website: 1
Available from shops: Cardiff: 1, Coventry: 2, Gloucester: 1, Stroud: 1
(Product Ref #27790)

Chuck holds drill sizes zero - 0.9mm, chuck width 8.8mm. Fitted with a small diameter plain shaft for use with mini-drills fitted with small chucks.

Overall length including shaft: 36.2mm
Shaft diameter: 3mm

£4.00
Website: 2
Available from shops: Coventry: 1, Stroud: 1
(Product Ref #54837)
Pin vice with double-ended collets for drill sizes from zero to 3mm.
£6.00
Website: 3
Available from shops: Bristol: 1, Cardiff: 3, Coventry: 3, Gloucester: 2, Stroud: 3
(Product Ref #526)
Good quality steel pin vice that has four different collets to hold drills sized o - 3mm
£5.00
Website: 2
Available from shops: Bristol: 5, Cardiff: 2, Gloucester: 2, Plymouth: 2, Stroud: 1
(Product Ref #4404)

750-16 Pin Vice / Tool Holder with revolving ball handle.
Supplied with 5 steel collets suitable for holding all items from Zero - 2.5mm.

£6.00
Website: 4
(Product Ref #1575)
Set of 4 pin vices in a wallet covering drill sizes from zero to 4.5mm

Overall length 100mm.

Please note : The largest vice will accomodate up to 4.5mm drill only, not as shown in the Expo 2015 catalogue.
£9.00
Website: 1
(Product Ref #86026)
High Quality, Steel Construction Archimedes Pin Drill holding sizes from 0 - 1 mm.
£5.00
Website: 1
Available from shops: Bristol: 8, Cardiff: 3, Coventry: 2, Plymouth: 1, Stroud: 1
(Product Ref #2481)
High Quality, Steel Construction Archimedes Pin Drill holding sizes from 0 - 1 mm. Has return spring!
£6.00
Website: 1
Available from shops: Bristol: 2, Cardiff: 4, Coventry: 2, Gloucester: 3, Plymouth: 1, Stroud: 2
(Product Ref #5098)
Archimedes PCB Pin Drill with two collets holding sizes from 0 - 1 mm.
£7.95
Website: 2
Available from shops: Bristol: 5, Coventry: 1, Gloucester: 1
(Product Ref #527)
Brass archimedes PCB�Pin Drill. 0-0.8mm capacity
£4.00
Website: 1
(Product Ref #84694)

Pistol Grip Hand Tool with internal gears & 3 jaw chuck.
Compartment in handle for drill bit storage.

Ideal for drilling larger holes in baseboards
etc. Chuck capacity: 8mm (3/8").

£11.00
Website: 1
Available from shops: Stroud: 1
(Product Ref #4067)
750-40 Professional Archimedes Drill Set.
Perfect for professional and hobby use.
Suitable for use with HSS Twist Drills sizes: 0.1mm to 3.2mm.
Aluminium Handle.

Set Contains:
Archimedes Drill
1.0, 1.5 and 2.0mm HSS Twist Drills
2-Double Ended Collets
£11.95
Website: 3
Available from shops: Bristol: 2, Cardiff: 3, Coventry: 1, Plymouth: 1, Stroud: 1
(Product Ref #89506)

A high quality pin vice with an adjustable 3-jaw chuck able to hold drills form 0.1 to 2.5mm diameter.
Fitted with a swiviel head to fit easily into the palm of the hand the 3 jaw chuck avoids the need to change colletts to use different size drills and can also hoold de-burring tools, abrasive brushes and polishing tools with 2.35mm shafts.

£9.95
Website: 2
Available from shops: Bristol: 1, Cardiff: 1, Coventry: 3, Gloucester: 2, Plymouth: 2
(Product Ref #80774)
£9.95
Website: 3
Available from shops: Bristol: 3, Cardiff: 4, Coventry: 1, Gloucester: 4, Plymouth: 1
(Product Ref #88236)
£3.00
Website: 3
Available from shops: Cardiff: 1, Coventry: 1
(Product Ref #26870)
Automatic centre punch with adjustable striking force. Head can be turned to increase or decrease the force applied to the spring before the punch fires
£3.95
Pre-Order (Website:0)
(Product Ref #75666)
Have a question? Contact us
Your browser is out-of-date!

Update your browser to view this website correctly. Update my browser now

×