Pandrol type rail shoe with fastener clips detail, ideal for hand-built trackwork featuring flat-bottom rail section. Approx 200 per pack.
£4.60
Website: 1
(Product Ref #37566)
A standard rail-built style buffer stop unit, as used at the end of sidings. This unit clips into sectional track units and will prevent loose wagons from running off the end of the track.
£2.59
Website: 9+
Available from shops: Stroud: 6
(Product Ref #2353)
Connects electrical supply to track
£2.79
Website: 9+
Available from shops: Cardiff: 4, Gloucester: 9+, Stroud: 4
(Product Ref #2335)

Pack of 12 metal conductive fishplates.

These can be used to replace lost or damaged fishplates on sectional track and to join flexible track sections.

£2.50
Website: 1
Available from shops: Stroud: 2
(Product Ref #30518)

Pack of 12 black plastic insulating fishplates.

These are used to electrically isolate sections of track, allowing trains to be switched off, for eaxmple in station platforms, while other trains are being run.

£1.55
Website: 4
Available from shops: Gloucester: 3, Plymouth: 2
(Product Ref #61532)
In-track uncoupler for British style tension-lock couplers, the standard type fitted to almost all Britrish outline OO models. Uncoupler will work with Bachmann, Dapol, Heljan, Hornby and Lima couplers, including both wide and narrow types.
Pack of 2
£2.55
Website: 2
(Product Ref #25753)
Peco's push together SL40 Rail Type Buffer Stop
£1.70
Website: 9+
Available from shops: Bristol: 1, Coventry: 6, Gloucester: 5, Plymouth: 5
(Product Ref #25756)
A simple plastic kit to build a sleeper built stop-block.
£1.70
Website: 1
Available from shops: Bristol: 3, Coventry: 1, Gloucester: 6, Plymouth: 7, Stroud: 4
(Product Ref #25758)
£7.00
Website: 2
Available from shops: Bristol: 4, Cardiff: 1
(Product Ref #31677)
£2.55
Website: 1
Available from shops: Coventry: 4, Gloucester: 2, Stroud: 1
(Product Ref #25759)

The introduction of TPWS, Train Protection Warning System, across the national network has resulted in these small grids appearing between the rails on the approach to signals, speed restrictions and terminal stations. Two grids are normally placed, one to arm the on-train systems and one to activate the system. The grids are placed at a suitable distance apart for the expected speed of trains, such that if a train approaching a restrictive signal has not reduced speed the system will automatically trigger a brake application.

Each pack contains 12 finely moulded grids, plus an appropriate number of supporting bars, allowing these to be trimmed to fit specific locations and track fixings.

£2.55
Website: 5
Available from shops: Gloucester: 2, Stroud: 1
(Product Ref #74346)

Just like our model railways the real railway has been using motorised points for many years. A powerful machine is needed to move and secure the points with sufficient pressure for safe use with high speed trains and these silver grey point motor housings are a familiar sight, mounted alongside the pointwork.

Unlike the real thing these units aren't able to operate your model points as well, but will help you complete the detailing of your track for any layout set from the 1960s onwards.

Supplied in packs of 6.

£2.55
Website: 5
Available from shops: Coventry: 1, Gloucester: 1, Stroud: 1
(Product Ref #74742)
A clip-on wood box type buffer stop. Place one of these at the end of each siding to prevent trains from running off the end of the tracks.

Timber or sleeper built stop blocks were an ecconomical means of prventing wagons running off the ends of sidings. The timbers formed an enclosure which was filled with earth or ballast, with a sleeper fixed across the stop block at buffer height to prevent the buffers breaking through the timbers.
£1.75
Website: 9+
Available from shops: Bristol: 9+, Cardiff: 9+, Coventry: 8, Gloucester: 9+, Plymouth: 9+, Stroud: 4
(Product Ref #31661)
Sprung uncoupling ramp for use with tension lock type couplings.

These uncoupler ramps allow remote uncoupling of tension lock type couplers. The couplings have a catch on the hook which prevents uncoupling when the train is drawn forwards over the ramp. To uncouple simply stop the train with the required couplings over the ramp and reverse, releasing the couplings. The sprung ramp presses up on the coupler pins, raising the hook arms and the front portion of the train can be hauled away.
To re-couple simply push the train back together, then continue until the couplings are clear of the ramp. The hooks will fall and re-engage the couplings.
£1.70
Website: 9+
Available from shops: Cardiff: 2, Coventry: 9+, Gloucester: 9+, Plymouth: 6, Stroud: 8
(Product Ref #31662)
A simple two-part track power connector which simply clips over the rails. The short arm connects to the near rail, the longer arm reaches to the far rail. No need to run wires under the track.

This two-part design allows each section to be used separately, allowing power feeders to be added where needed, without having to make space for a larger combined power connector or power track.
£2.95
Website: 9+
Available from shops: Bristol: 9+, Cardiff: 9+, Coventry: 9, Gloucester: 9+, Plymouth: 9+
(Product Ref #31664)
Two sections of straight station platform with self-adhesive brick strips to complete the facing.
The platforms are 168mm long and 88mm wide, but grooves underneath the platform top allow other width to be created quickly at 74mm, 56mm and 45mm widths.
£4.95
Website: 2
Available from shops: Bristol: 1, Gloucester: 2, Stroud: 2
(Product Ref #31666)
Two platform end ramp sections for use with brick faced platform sections ST-290 and ST-292.
£4.15
Website: 1
Available from shops: Bristol: 1, Cardiff: 1, Gloucester: 2
(Product Ref #31668)

Track circuit and voltage tester suitable for N (9mm), TT (12mm) OO/HO (16.5mm) gauge track

Check not just if your track has power but also how much!
Lights illuminate for 5-9V, 9-12V and +12V. Suitable for analogue DC and DCC systems. Wiring of the tester is 'directional' so if the lights do not illuminate first reverse the tester and check the track again.
Use to verify that your track has a power feed and that the voltage is that expected. Ideal for helping locate voltage drop faults caused by broken feed wires or poor fishplate connections.

£14.00
Website: 1
Available from shops: Gloucester: 3
(Product Ref #2471)
Timber built buffer stop unit, typically used on minor sidings. These buffer stops were often filled with earth or old ballast.
£1.60
Available from shops: Bristol: 7, Gloucester: 6
(Product Ref #698)

Insulator mountings for conductor rails. These insulators are fitted to the sleepers at suitable intervals to support the live power rails.

Ideal for modelling the Southern Railway/region thrid-rail electric system, with electric unit trains available or announced by Bachmann and Hornby. Designed to hold code 60 rail, IL-1.

£5.00
Available from shops: Coventry: 1
(Product Ref #64370)
Contructs a turntable with a 305mm/12in deck able to accomodate all British outline OO model locomotives and almost all non-articulated HO locomotive models.
£47.50
Available from shops: Coventry: 1
(Product Ref #25729)
Two sections of straight station platform with self-adhesive stone paper strips to complete the facing.
The platforms are 168mm long and 88mm wide, but grooves underneath the platform top allow other width to be created quickly at 74mm, 56mm and 45mm widths.
£4.95
Available from shops: Cardiff: 2
(Product Ref #31667)
Two sections of curved station platform with self-adhesive brick strips to complete the facing.
The platforms are curved to suit No.2 radius on the inside face and are supplied 88mm wide with grooves underneath the top allow for 74mm, 56mm and 45mm widths to be created easily.
£6.95
Available from shops: Bristol: 1, Stroud: 1
(Product Ref #66958)
Two sections of curved station platform with self-adhesive stone strips to complete the facing.
The platforms are curved to suit No.2 radius on the inside face and are supplied 88mm wide with grooves underneath the top allow for 74mm, 56mm and 45mm widths to be created easily.
£6.95
Available from shops: Bristol: 1, Coventry: 1
(Product Ref #66959)
Two platform end ramp sections for use with stone faced platform sections ST-291 and ST-293.
£4.15
Available from shops: Cardiff: 1, Plymouth: 2
(Product Ref #31669)
Have a question? Contact us
Your browser is out-of-date!

Update your browser to view this website correctly. Update my browser now

×