Realistic looking and ready-to-place. Styrene Wood Planks are notched to fit over rail spikes. Includes shims to correspond to proper code - cut as needed. Two crossings in each package. Works for 2 and 3-rail.

Before the advent of modern, well-built tarmac road surfaces the railway companies made extensive use of wood timbers for level crossing decking as the timbers could easily be removed to maintain the tracks below. Many level crossings on minor roads and farm crossings still have timber baulks to retain the infill between the tracks.

£14.75
Website: 3
(Product Ref #44925)

These Die Cut O Gauge Poster Boards are a superb addition to your model railway, and will add that finishing touch to your stations or buildings on your layout.

These signs are printed on Self Adhesive Gloss Vinyl and are easily peelable and ready to affix to your buildings. 

£9.99
Website: 1
(Product Ref #96965)

These Die Cut O Gauge Poster Boards are a superb addition to your model railway, and will add that finishing touch to your stations or buildings on your layout.

These signs are printed on Self Adhesive Gloss Vinyl and are easily peelable and ready to affix to your buildings. 

£9.99
Website: 1
(Product Ref #96966)

These Die Cut O Gauge Poster Boards are a superb addition to your model railway, and will add that finishing touch to your stations or buildings on your layout.

These signs are printed on Self Adhesive Gloss Vinyl and are easily peelable and ready to affix to your buildings. 

£9.99
Website: 1
(Product Ref #96967)

These Die Cut O Gauge Poster Boards are a superb addition to your model railway, and will add that finishing touch to your stations or buildings on your layout.

These signs are printed on Self Adhesive Gloss Vinyl and are easily peelable and ready to affix to your buildings. 

£9.99
Website: 1
(Product Ref #96968)

These Die Cut O Gauge Poster Boards are a superb addition to your model railway, and will add that finishing touch to your stations or buildings on your layout.

These signs are printed on Self Adhesive Gloss Vinyl and are easily peelable and ready to affix to your buildings. 

£9.99
Website: 1
(Product Ref #96969)

These Die Cut O Gauge Poster Boards are a superb addition to your model railway, and will add that finishing touch to your stations or buildings on your layout.

These signs are printed on Self Adhesive Gloss Vinyl and are easily peelable and ready to affix to your buildings. 

£9.99
Website: 1
(Product Ref #96970)

These Die Cut O Gauge Poster Boards are a superb addition to your model railway, and will add that finishing touch to your stations or buildings on your layout.

These signs are printed on Self Adhesive Gloss Vinyl and are easily peelable and ready to affix to your buildings. 

£9.99
Website: 1
(Product Ref #96971)

These Die Cut O Gauge Poster Boards are a superb addition to your model railway, and will add that finishing touch to your stations or buildings on your layout.

These signs are printed on Self Adhesive Gloss Vinyl and are easily peelable and ready to affix to your buildings. 

£9.99
Website: 1
(Product Ref #96972)
Pre-painted SR type ground signal.
£5.00
Website: 6
(Product Ref #53630)

These Die Cut O Gauge Poster Boards are a superb addition to your model railway, and will add that finishing touch to your stations or buildings on your layout.

These signs are printed on Self Adhesive Gloss Vinyl and are easily peelable and ready to affix to your buildings. 

£7.00
Website: 1
(Product Ref #96973)

These Die Cut O Gauge Poster Boards are a superb addition to your model railway, and will add that finishing touch to your stations or buildings on your layout.

These signs are printed on Self Adhesive Gloss Vinyl and are easily peelable and ready to affix to your buildings. 

£7.00
Website: 1
(Product Ref #96974)
Ready painted resin cast model of the standard BR provender store building, as errected at many stations to provide secure storage for local merchants. Many were used by the manufacturers and distributors of farm supplies such as fertiliser and animal feed.
200mm x 175mm x 125mm
£49.95
Available from shops: Plymouth: 1
(Product Ref #34279)

Assembled and painted model of a typical lineside section or platelayers' hut.

£19.95
Available from shops: Stroud: 1
(Product Ref #55256)

Low relief corner shop to complete the end of a terrace of houses.

£25.95
Pre-Order (Website:0)
(Product Ref #92181)

A detailed working model of a GWR lower quadrant home or stop signal.

This detailed operating signal features LED lighting, shining through the red or green lens of the signal arm depending on position and a fine etched steel ladder. The signal fits through a 13mm diameter in the baseboard, allowing the motor and electronics to be fitted out of sight below the baseboard. Supplied ready for DC operation, conversion to DCC is possible using a static accessory decoder (not supplied).

£0.00
Available Soon (Website:0)
(Product Ref #91423)

A detailed working model of a GWR lower quadrant home or stop signal.

This detailed operating signal features LED lighting, shining through the red or green lens of the signal arm depending on position and a fine etched steel ladder. The signal fits through a 13mm diameter in the baseboard, allowing the motor and electronics to be fitted out of sight below the baseboard. Supplied ready for DC operation, conversion to DCC is possible using a static accessory decoder (not supplied).

£0.00
Available Soon (Website:0)
(Product Ref #91424)

A detailed working model of a LMS upper quadrant home or stop signal.

This detailed operating signal features LED lighting, shining through the red or green lens of the signal arm depending on position and a fine etched steel ladder. The signal fits through a 13mm diameter in the baseboard, allowing the motor and electronics to be fitted out of sight below the baseboard. Supplied ready for DC operation, conversion to DCC is possible using a static accessory decoder (not supplied).

£0.00
Available Soon (Website:0)
(Product Ref #91426)
A detailed working model of a LMS upper quadrant home or stop signal.

This detailed operating signal features LED lighting, shining through the red or green lens of the signal arm depending on position and a fine etched steel ladder. The signal fits through a 13mm diameter in the baseboard, allowing the motor and electronics to be fitted out of sight below the baseboard. Supplied ready for DC operation, conversion to DCC is possible using a static accessory decoder (not supplied).
£0.00
Available Soon (Website:0)
(Product Ref #91425)

These Die Cut O Gauge Poster Boards are a superb addition to your model railway, and will add that finishing touch to your stations or buildings on your layout.

These signs are printed on Self Adhesive Gloss Vinyl and are easily peelable and ready to affix to your buildings. 

£9.99
Pre-Order (Website:0)
(Product Ref #96964)
Have a question? Contact us
Your browser is out-of-date!

Update your browser to view this website correctly. Update my browser now

×