Cyanoacrylate and similar superglues will stick almost any material to anything else.
Caution! This includes you, your fingers, clothing, worktable and everything else the glue comes into contact with.
To ensure only the right parts get glued we recommend placing a small amount of the glue on a piece of scrap, eg a piece of smooth card or one of those small polythene parts bags, then recapping the bottle to prevent spillage. Using a pin a controlled amount of adhesive can be placed exactly where the joint is to be made without getting fingers too close. When finished the glue carrier can be disposed of by folding face-to-face, safely enclosing the excess glue.
If glue is transferred onto your fingers immediately wash the contaminated skin area with warm water and soap. If irritation occurs or your fingers become  stuck together seek medical assistance, taking the glue bottle with you if possible.
Zap is perfect for modellers because it is durable, shock-resistant, and versatile. The specific formulas of Zap for use on plastic, fiberglass, balsa wood, and metal ensure that no amount of stress will cause a breakage or failure. Super-thin penetrating formula. Works great on most materials, especially balsa. Strengthens fiberglass and cloth. Bonds in 1 to 5 seconds.

£4.99
Website: 9+
Available from shops: Cardiff: 9+, Coventry: 9+, Gloucester: 9+, Stroud: 9
(Product Ref #28396)
Zap is perfect for modellers because it is durable, shock-resistant, and versatile. The specific formulas of Zap for use on plastic, fiberglass, balsa wood, and metal ensure that no amount of stress will cause a breakage or failure. Fills gaps. Allows 7 to 10 seconds for positioning. Cures in 24 hours. Accelerate with KICKER. Bonds anything, even oily surfaces!
£4.49
Website: 9+
Available from shops: Cardiff: 1, Coventry: 2, Gloucester: 9+, Plymouth: 4, Stroud: 1
(Product Ref #28395)
Zap is perfect for modellers because it is durable, shock-resistant, and versatile. The specific formulas of Zap for use on plastic, fiberglass, balsa wood, and metal ensure that no amount of stress will cause a breakage or failure. Fills gaps. Allows 7 to 10 seconds for positioning. Cures in 24 hours. Accelerate with KICKER. Bonds anything, even oily surfaces!
£3.99
Website: 7
(Product Ref #100843)
Zap is perfect for�modellers because it is durable, shock-resistant, and versatile. The specific formulas of Zap for use on plastic, fiberglass, balsa wood, and metal ensure that no amount of stress will cause a breakage or failure. Super-thin penetrating formula. Works great on most materials, especially balsa. Strengthens fiberglass and cloth. Bonds in 1 to 5 seconds.

£6.99
Website: 9
Available from shops: Bristol: 2, Cardiff: 9, Coventry: 9+, Gloucester: 9+, Plymouth: 5, Stroud: 9+
(Product Ref #22021)
Zap is perfect for modellers because it is durable, shock-resistant, and versatile. The specific formulas of Zap for use on plastic, fiberglass, balsa wood, and metal ensure that no amount of stress will cause a breakage or failure. Fills gaps. Allows 7 to 10 seconds for positioning. Cures in 24 hours. Accelerate with KICKER. Bonds anything, even oily surfaces!
£6.99
Website: 3
Available from shops: Bristol: 9, Cardiff: 5, Coventry: 7, Gloucester: 9+, Plymouth: 4, Stroud: 7
(Product Ref #26723)
Zap is perfect for modellers because it is durable, shock-resistant, and versatile. The specific formulas of Zap for use on plastic, fiberglass, balsa wood, and metal ensure that no amount of stress will cause a breakage or failure. Thick and strong for high-stress areas. Ideal for laminating and forming fillets. Allows you 30 seconds to position; cures in 60 sec.
£7.99
Website: 9+
Available from shops: Bristol: 1, Coventry: 6, Gloucester: 7
(Product Ref #28399)
Zap is perfect for modellers because it is durable, shock-resistant, and versatile. The specific formulas of Zap for use on plastic, fiberglass, balsa wood, and metal ensure that no amount of stress will cause a breakage or failure. Super-thin penetrating formula. Works great on most materials, especially balsa. Strengthens fiberglass and cloth. Bonds in 1 to 5 seconds.
£12.50
Website: 5
Available from shops: Bristol: 4, Coventry: 2, Gloucester: 4, Plymouth: 3, Stroud: 4
(Product Ref #39356)
Zap is perfect for modellers because it is durable, shock-resistant, and versatile. The specific formulas of Zap for use on plastic, fiberglass, balsa wood, and metal ensure that no amount of stress will cause a breakage or failure. Fills gaps. Allows 7 to 10 seconds for positioning. Cures in 24 hours. Accelerate with KICKER. Bonds anything, even oily surfaces!
£12.50
Website: 9+
Available from shops: Bristol: 9, Coventry: 6, Gloucester: 7, Stroud: 5
(Product Ref #39355)
Zap is perfect for modellers because it is durable, shock-resistant, and versatile. The specific formulas of Zap for use on plastic, fiberglass, balsa wood, and metal ensure that no amount of stress will cause a breakage or failure. Odorless "no more tears" formula. Safe for all hobby foams. Medium thick, cures in 15 seconds.
£9.25
Website: 5
Available from shops: Cardiff: 4, Gloucester: 8, Stroud: 6
(Product Ref #22022)
Accidents happen to the best of us, so to avoid that expensive taxi ride to the hospital, always have a bottle of debonder handy. Debonding agent for all super glues. Softens cured glue so it can be easily removed from fingers and other surfaces. Always test first.
£4.49
Website: 6
Available from shops: Bristol: 3, Cardiff: 5, Coventry: 5, Gloucester: 4, Plymouth: 1, Stroud: 3
(Product Ref #9148)
Sometimes "instant" glue just isn't fast enough! If you need to use a gap filling cyanoacrylate, but are put off by the setting times Kicker is the answer. You can either assemble the parts and apply kicker afterwards to give a truly�instant bond, or apply kicker to one surface and glue to the other, not for the feint-hearted. Super glue accelerator. Best working accelerator for ZAP and all other super glues you'll find! Sets in just a few seconds. 2-oz pump bottle.
£7.25
Website: 1
Available from shops: Stroud: 9+
(Product Ref #28397)
Surface activator for Cyanoacrylate Adhesives primes and accelerates cure on surfaces which cyanoacrylate adhesives are unable to cure or cure too slowly. 200ml aerosol spray, ideal for speed building but make sure to wear a face mask.
£12.99
Available from shops: Coventry: 1, Gloucester: 1, Stroud: 2
(Product Ref #42592)
£3.75
Website: 9+
Available from shops: Bristol: 9, Cardiff: 9+, Coventry: 6, Plymouth: 4, Stroud: 9+
(Product Ref #2393)
Vital Bond Odourless does exactly what it says on the tin! For those sensitive to superglue vapour, this is the ideal solution. Because of the lack of fume it's also�safe on foam and clear plastics.
£7.49
Website: 4
Available from shops: Gloucester: 4, Stroud: 7
(Product Ref #38401)
Possibly the finest blue thread locker you can buy! Prevents loosening of nuts and bolts which are subject to high vibration, yet parts disassemble with simple hand tools. 
£2.99
Website: 5
Available from shops: Bristol: 4, Cardiff: 7, Coventry: 1, Gloucester: 5, Plymouth: 2, Stroud: 2
(Product Ref #5493)
With the very quick cure time of Cyanoacrylate, it is always advisable to keep a bottle of Skin Debonder on the work bench, just in case.

£3.75
Website: 3
Available from shops: Bristol: 1
(Product Ref #40637)
The C/A Applicator Tool is a unique device for applying Cyanoacrylate Cement.  To use this tool hold the C/A Applicator in one hand, and dip the double pronged tip into a small puddle of C/A Cement.  The C/A Applicator will pick up a small amount of C/A Cement and apply it where you want it!  To clean the C/A Applicator wipe off the tip with a paper towel or a piece of cloth a small amount of acetone will also help.  If the C/A Applicator becomes clogged or has a build-up at the tip, a small hobby knife will remove it.
£6.49
Available from shops: Bristol: 2
(Product Ref #76995)
Need to keep things organized on your work space?  This kit is perfect for spatial organization and is a great accesory for the Touch-N-Flow System.  The plastic base keeps your tools organized and the Touch-N-Flow level ready for use.
£13.99
Website: 2
(Product Ref #77019)
£3.99
Website: 2
Available from shops: Gloucester: 4
(Product Ref #57527)

If you're looking for a cheep, all round solution for general home repairs - look no further. Revell Contacta Super Glue is a handy adhesive to keep in the toolbox. It will bond most materials including glass and china. Powerful stuff, so mind your fingers!

�

£3.50
Available from shops: Coventry: 4, Gloucester: 2
(Product Ref #694)
£3.75
Website: 9
Available from shops: Bristol: 9+, Cardiff: 6, Coventry: 5, Plymouth: 1
(Product Ref #2392)
£3.75
Website: 9+
Available from shops: Bristol: 9+, Cardiff: 9+, Plymouth: 9+, Stroud: 9+
(Product Ref #2394)
£6.95
Website: 5
Available from shops: Bristol: 2, Plymouth: 3
(Product Ref #2395)
£6.95
Website: 5
Available from shops: Bristol: 5, Plymouth: 6
(Product Ref #2396)
£6.95
Website: 3
Available from shops: Bristol: 6, Plymouth: 2
(Product Ref #2397)
Tricky Stick is a surface primer which will allow cyano glues to bond better with difficult plastics including shiny platsics, EPP, EPO, polypropylene, silicone and nylon.
£8.99
Website: 2
Available from shops: Bristol: 2, Gloucester: 2, Plymouth: 1, Stroud: 1
(Product Ref #93555)
Super-thin, crystal clear , penetrating adhesive
Sets in 1 to 5 seconds

£5.85
Website: 2
Available from shops: Coventry: 1, Gloucester: 6, Plymouth: 1
(Product Ref #83506)
Medium viscosity, fast setting adhesive
Sets in 5 to 10 seconds

£5.85
Website: 2
Available from shops: Coventry: 2, Gloucester: 3
(Product Ref #1294)
Thick, maximum gap-filling adhesive
Sets in 10 to 20 seconds

£5.85
Website: 2
(Product Ref #2413)
Low odour, non blooming. Safe for plastics and foam
Sets in 10 to 20 seconds.

£8.25
Website: 2
Available from shops: Coventry: 7, Gloucester: 3, Plymouth: 1
(Product Ref #4874)

Debonder and dissolver for cyanoacrylate 'super glue'.

Releases bonded skin and removes superglue stains.

£6.50
Website: 2
Available from shops: Coventry: 2, Gloucester: 1, Plymouth: 1
(Product Ref #76099)
£22.99
Website: 2
Available from shops: Bristol: 1
(Product Ref #45943)
£5.75
Website: 9+
Available from shops: Bristol: 4, Cardiff: 6, Coventry: 2, Gloucester: 9+, Plymouth: 1, Stroud: 4
(Product Ref #81915)
£12.99
Website: 5
Available from shops: Cardiff: 1, Gloucester: 3, Stroud: 2
(Product Ref #28400)
£5.99
Website: 2
Available from shops: Plymouth: 1
(Product Ref #50105)
63ml Expo Accelerator Spray Can
Super Glue Accelerators speed up setting times to give an instant bond and improve adhesion in difficult situations. 
£3.95
Available from shops: Cardiff: 2
(Product Ref #102298)

Fast setting non-runny gel cyano glue.
Ideal for locations where using liquid cyano adhesives is difficult, the gel will not run.
20ml tube. Bonding time 10 seconds.

£6.99
Available from shops: Bristol: 1
(Product Ref #93554)
£5.99
Available from shops: Gloucester: 1
(Product Ref #40321)
Have a question? Contact us
Your browser is out-of-date!

Update your browser to view this website correctly. Update my browser now

×