703-45 Single Cutting broach for 3-4mm (ideal for 1/8 axles on model locomotives).

HIGH QUALITY GERMAN MADE

£10.95
Website: 1
(Product Ref #47942)
An excellent value tapered reamer suitable for use with light materials such as softwoods, balsa, plastics and soft metals, eg. soft brass. Covers sizes from 4mm to 12.5mm.
£5.00
Website: 2
(Product Ref #6244)
6BA taper tap supplied with tapping and clearance drills.
£6.00
Website: 3
Available from shops: Bristol: 1, Coventry: 3
(Product Ref #67548)
8BA taper tap, this is the most popular type as it is suitable for both starting the job and producing a thread where the hole passes right through the material, such as the chassis frame on a model locomotive
£8.00
Website: 3
(Product Ref #48264)
8BA plug tap, used for cutting treads to very near the bottom of blind-ended holes. Pack is supplied with tap (small diameter for thread cutting) and clearance drills.
£8.00
Website: 2
(Product Ref #96711)
10BA taper tap.12BA taper tap, this is the most popular type as it is suitable for both starting the job and producing a thread where the hole passes right through the material, such as the chassis frame on a model locomotive
£10.00
Website: 2
Available from shops: Cardiff: 2, Coventry: 1
(Product Ref #48265)
10BA plug tap, also known as a bottoming tap, these taps do not have a tapered section on the cutting section.Suitable for producing a thread where the hole does not pass right through the material.It is normally necessary to start the thread using a taper tap of the same size, and then finish with a plug tap
£10.00
Website: 5
(Product Ref #517)
12BA taper tap, this is the most popular type as it is suitable for both starting the job and producing a thread where the hole passes right through the material, such as the chassis frame on a model locomotive
£11.00
Website: 3
Available from shops: Cardiff: 2, Stroud: 2
(Product Ref #48266)
£11.00
Website: 1
(Product Ref #67948)
£12.00
Website: 1
(Product Ref #67947)

788-29 Standard Tap Wrench.
Ideal for all taps from 3mm to 12mm.

£4.95
Website: 2
(Product Ref #77856)
Miniature tap wrench for small taps up to 3mm.
£4.00
Website: 3
Available from shops: Gloucester: 1
(Product Ref #31182)
£5.00
Website: 1
Available from shops: Cardiff: 1
(Product Ref #53545)
Set of M3.5 taps and drills. Includes tapping and clearance drills, plug and taper taps.
£5.00
Website: 3
Available from shops: Cardiff: 3
(Product Ref #54274)
£5.00
Website: 1
(Product Ref #86810)
High quality tapered reamer manufacturerd from heat treated steel for maximum durability. Covers sizes from 2mm to 13mm.
£11.95
Available from shops: Bristol: 2, Coventry: 1
(Product Ref #6243)
M2 tap with clearance  / tappping drill bit
£5.00
Available from shops: Cardiff: 1
(Product Ref #45203)
£5.00
Available from shops: Cardiff: 1
(Product Ref #53546)
£5.00
Available from shops: Cardiff: 1
(Product Ref #53547)
£5.00
Available from shops: Cardiff: 1, Coventry: 2
(Product Ref #53548)
£5.00
Available from shops: Bristol: 1
(Product Ref #41423)
For use with standard size 13./16in outside diameter dies.
£4.95
Available from shops: Bristol: 1, Coventry: 1
(Product Ref #30682)
£3.50
Pre-Order (Website:0)
(Product Ref #26867)
Have a question? Contact us
Your browser is out-of-date!

Update your browser to view this website correctly. Update my browser now

×