£17.99
Available from shops: Stroud: 1
(Product Ref #97530)
Is a luxury hotel located in Dubai, United Arab Emirates. At 321 m (1,053 ft), it is the fourth tallest hotel in the world, however 39% of its total height is made up of non-occupiable space. Burj Al Arab stands on an artificial island 280 m (920 ft) from Jumeirah beach and is connected to the mainland by a private curving bridge. The shape of the structure is designed to mimic the sail of a ship. Sometimes referred to as "the world's only 7-Star hotel", its star rating is disputed.

Item#: ICX012
Number of sheets: 1 Sheet
Difficulty: Easy
Assembled Size:

4.75"H x 2.1" x 2.1"

£17.99
Available from shops: Cardiff: 1, Gloucester: 1, Stroud: 2
(Product Ref #97739)
£17.99
Available from shops: Stroud: 1
(Product Ref #97531)

The San Francisco cable car system is the world's last permanently operational manually operated system in the US and is among the most famous tourist attractions in the city along with Alcatraz Island and Fisherman's Wharf. Cable cars operate on two routes from downtown near Union Square to Fisherman's Wharf and a third route along California Street.

Item#: MMS002
Number of sheets: 1 Sheet
Difficulty: Easy
Assembled Size: 2.15" x 0.98" x 1.29" (5.5 x 2.5 x 3.3 cm)

£6.99
Available from shops: Cardiff: 1, Gloucester: 1
(Product Ref #96384)
The P-51 Mustang was a long-range World War II fighter aircraft that flew as a bomber escort over Germany. Powered with the British Rolls-Royce Merlin engine, it was unmatched by any other piston fighter aircraft of World War II.
Item#: MMS003
Number of sheets: 1 Sheet
Difficulty: Easy
Assembled Size:

3.51" x 3.71" x 1.17" (9 x 9.5 x 3 cm)

£6.99
Available from shops: Gloucester: 1, Stroud: 1
(Product Ref #90979)
£6.99
Available from shops: Cardiff: 3
(Product Ref #71881)
Metal Earth Bell Huey helicopter 3D laser-cut metal assembly kit.

Metal Earth is a collection of intricately designed model kits produced from laser-cut metal. Each kit consists of a highly detailed laser etching cut into one or more four-inch square sheets of thin metal. The pieces can be snapped out and assembled with tab-and-slot assembly to create detailed replicas of vehicles and architecture that fit in the palm of your hand.
Striking to look at with a polished metal finish most Metal Earth models take less than an hour to complete. Average model size is around 3 inches, some (eg ships) are longer.

No glue is required for assembly and it can be done by hand, though we recommend the use of small pliers and tweezers to bend, guide and secure the tabs into place.
Caution - contains small parts and edges may be sharp. Not suitable for young children.
£6.99
Available from shops: Cardiff: 1, Stroud: 3
(Product Ref #96366)
Item#: MMS015
Number of sheets: 1 Sheet
Difficulty: Easy
Assembled Size:

3.9" x 2.73" x 1.95" (10 x 7 x 5 cm)

£6.99
Available from shops: Cardiff: 1, Gloucester: 1
(Product Ref #96367)
Located on the Champ de Mars in Paris, the Eiffel Tower has become a global icon of France and one of the most recognizable structures in the world. Named after its designer, engineer Gustave Eiffel, the tower was built as the entrance arch to the 1889 World’s Fair and stands at 1,063 feet tall. It was the tallest man-made structure in the world until the Chrysler Building was built in 1930.

Item#:
MMS016
Number of sheets: 1 Sheet
Difficulty: Easy
Assembled Size:

4.49" x 1.60" x 1.56" (11.5 x 4.1 x 4 cm)

£6.99
Available from shops: Gloucester: 1
(Product Ref #96373)
Big Ben is the nickname for the great bell of the clock at the north end of the Palace of Westminster in London though today the name also refers to the clock and the clock tower. The bell weighs almost 14 tons and each clock face is 23 feet in diameter. It became fully operational on September 7th, 1859 and is today one of the most prominent symbols of London standing at 316 feet high. The clock requires winding three times per week and pennies are periodically added or removed from the clock of pendulum to maintain its accuracy.

Item#:
MMS019
Number of sheets: 1 Sheet
Difficulty: Easy
Assembled Size:

4.68" x 0.66" x 0.66" (12 x 1.7 x 1.7 cm)

£6.99
Available from shops: Cardiff: 1, Gloucester: 1, Stroud: 1
(Product Ref #96374)
Item#: MMS022
Number of sheets: 2 Sheets
Difficulty: Moderate
Assembled Size:

5.46" x 0.78" x 2.22" (14 x 2 x 5.7 cm)

£9.99
Available from shops: Cardiff: 1
(Product Ref #96375)
Arc de Triomphe was inspired by Napoleon who after his Austerlitz victory on December 2nd 1805 said to his soldiers, "You will return home through archs of triumph". The monument, located in Paris, stands 50 meters high by 45 meters wide by 22 meters deep

Item#:
MMS023
Number of sheets: 2 Sheets
Difficulty: Moderate
Assembled Size:

2.18" x 2.34" x 0.90" (5.6 x 6 x 2.3 cm)

£9.99
Available from shops: Cardiff: 3
(Product Ref #96376)
The largest ship afloat left Southampton, England, April 10, 1912 on her maiden voyage to New York City. Just five days later at 2:20 am on the morning of April 15th she sank after hitting an iceberg 400 miles off the coast of Nova Scotia. Of the 2,223 people on board, only 710 survived.

Item#:
MMS030
Number of sheets: 2 Sheets
Difficulty: Moderate
Assembled Size:

5.27" x 1.56" x 0.90" (13.5 x 4 x 2.3 cm)

£9.99
Available from shops: Bristol: 1, Stroud: 2
(Product Ref #96379)
The Steam Locomotive is a train that produces its power from a steam engine. The train must carry its water either in the locomotive itself or in an attached car behind the locomotive. The steam is produced by burning coal, wood or oil. Steam engines dominated railway transportation from the early 19th century through the middle of the 20th century.
Item#: MMS033
Number of sheets: 2 Sheets
Difficulty: Moderate
Assembled Size: 4.29" x 0.90" x 1.17" (11 x 2.3 x 3 cm)
£9.99
Available from shops: Coventry: 1, Gloucester: 1
(Product Ref #96385)
The term windmill derives from their use to mill grain. The first windmills appeared in Europe during the 12th century in northwestern France and southern England. At their peak of popularity some windmills were able to produce more than 1.5 megawatts of power, a level not reached again until 1988.

Item#:
MMS038
Number of sheets: 2 Sheets
Difficulty: Moderate
Assembled Size:

3.90" x 1.76" x 2.03" (10 x 4.5 x 5.2 cm)

£9.99
Available from shops: Cardiff: 2
(Product Ref #96387)
A tower designed to emit light for marking dangerous coastlines, hazardous shoals, hidden reefs and also to help guide ships into safe harbors. Often these towers are cylindrical in order to avoid damage from strong winds.
Item#: MMS040
Number of sheets: 1 Sheet
Difficulty: Easy
Assembled Size:

3.51" x 1.60" x 1.21" (9 x 4.1 x 3.1 cm)

£9.99
Available from shops: Cardiff: 1
(Product Ref #96388)
Wright Brothers Airplane
On December 17, 1903, Orville Wright piloted the first powered airplane 20 feet above a wind-swept beach in North Carolina. The flight lasted 12 seconds and covered 120 feet.

Item#:
MMS042
Number of sheets: 1 Sheet
Difficulty: Easy
Assembled Size:

3.90" x 1.99" x 0.82" (10 x 5.1 x 2.1 cm)

£6.99
Available from shops: Gloucester: 2, Stroud: 1
(Product Ref #96368)
The first modern Ferris Wheel was designed and constructed by George Washington Ferris as a landmark for the 1893 Worlds Columbian Exposition in Chicago. The term Ferris wheel later came to be used generically for all such structures. As of 2012, the Singapore Flyer at 541 feet high is the world’s tallest wheel

Item#:
MMS044
Number of sheets: 2 Sheets
Difficulty: Moderate
Assembled Size: 2.93" x 3.55" x 1.29" (7.5 x 9.1 x 3.3 cm)
£9.99
Available from shops: Cardiff: 3, Coventry: 1
(Product Ref #96389)
The Golden Hind or Hinde was an English galleon best known for its circumnavigation of the globe between 1577 and 1580, captained by Sir Francis Drake. She was originally known as the Pelican, but was renamed by Drake mid-voyage in 1578, as he prepared to enter the Strait of Magellan, calling it the Golden Hind to compliment his patron, Sir Christopher Hatton, whose armorial crest was a golden 'hind' (a female deer). Hatton was one of the principal sponsors of Drake's world voyage.

Item#:
MMS049
Number of sheets: 2 Sheets
Difficulty: Moderate
Assembled Size: 4.29" x 1.37" x 3.51" (11 x 3.5 x 9 cm)

£9.99
Available from shops: Gloucester: 2
(Product Ref #96381)
The Ford Model T was the first automobile mass produced on moving assembly lines with completely interchangeable parts, marketed to the middle class. This car had 2 forward gears, a 20 horsepower engine and no driver doors.

Item#: MMS051
Number of sheets: 2 Sheets
Difficulty: Moderate
Assembled Size: 3.51" x 1.95" x 1.79" (9 x 5.0 x 4.6 cm)
£9.99
Available from shops: Gloucester: 1
(Product Ref #96386)
Hydrogen-filled, rigid airship which operated commercially from 1928 to 1937. During that time it made 590 flights and flew more than a million miles. The Zeppelin could achieve a top speed of 80 mph (70 knots) at its maximum thrust of 2,650 horsepower and had a useable payload of 15,000 kg (33,000 lbs).

Item#:
MMS063
Number of sheets: 1 Sheet
Difficulty: Moderate
Assembled Size:

4.72" x 1.37" x 1.44" (12.1 x 3.5 x 3.7 cm)

£9.99
Available from shops: Stroud: 1
(Product Ref #96370)
Is a 1930s biplane designed by Geoffrey de Havilland and was operated by the Royal Air Force (RAF) and others as a primary trainer. It is a very easy plane to fly with a stall speed of only 25 knots. However, it has no electrical system and must be started by hand.
Item#: MMS066
Number of sheets: 1 Sheet
Difficulty: Easy
Assembled Size:

3.59" x 2.85" x 0.98" (9.2 x 7.3 x 2.5 cm)

£6.99
Available from shops: Gloucester: 1
(Product Ref #96371)
£6.99
Available from shops: Gloucester: 1
(Product Ref #71877)
£9.99
Available from shops: Gloucester: 1
(Product Ref #71869)
£9.99
Available from shops: Cardiff: 1, Gloucester: 1
(Product Ref #71868)
£6.99
Available from shops: Cardiff: 2
(Product Ref #71879)

Laser cut metal kit building a model of the USAF F-15 Eagle

£6.99
Available from shops: Cardiff: 1
(Product Ref #81664)
This American tandem rotor, heavy-lift helicopter was first used during the Vietnam War. Powered by two 4,733 horsepower turbo-shaft engines, it has a top speed of 196 mph which made it faster than any other utility and attack helicopter at that time. It remains in production and frontline service, with over 1,200 built to date.

Item#:
MMS084
Number of sheets: 2 Sheets
Difficulty: Easy
Assembled Size:

7.4" x 3.74" x 1.88"

£9.99
Available from shops: Bristol: 1, Gloucester: 1
(Product Ref #97528)
This early bicycle design called the Penny-farthing was first produced about 1870. It used an enlarged front wheel instead of gears to create greater speed and a smoother ride. It was the first machine to be called a bicycle.
Item#: MMS087
Number of sheets: 2 Sheets
Difficulty: Moderate
Assembled Size: 3.42" x 1.18" x 2.87"
£9.99
Available from shops: Cardiff: 1
(Product Ref #78345)
Metal Earth Boeing B-17 Flying Fortress MMS091
Laser cut metal kit building a model of the Being B-17 Flying Fortress World War II Bomber.
£9.99
Available from shops: Cardiff: 2, Gloucester: 1, Stroud: 1
(Product Ref #81671)
Pennsylvania-class battleship, built in the mid-1910s and modernized in 1931. She was bombed and sunk in the attack on Pearl Harbor, December 7th 1941, killing 1,177 officers and crewmen.

Item#:
MMS097
Number of sheets: 2 Sheets
Difficulty: Moderate
Assembled Size: 5.51" x 0.99" x 2"
£9.99
Available from shops: Cardiff: 1, Gloucester: 3, Stroud: 1
(Product Ref #43828)

Laser cut metal kit building a model of the USAF A-10 Warthog

£11.99
Available from shops: Cardiff: 2, Gloucester: 2
(Product Ref #102709)
£6.99
Available from shops: Cardiff: 5, Coventry: 2, Gloucester: 1, Plymouth: 1, Stroud: 1
(Product Ref #101786)
The T-34 Tank was a Soviet tank that was produced from 1940 to 1958. Although its armor and armament were surpassed by later World War II tanks, it has been often credited as the most effective, efficient and influential tank design of WWII.

Item#: MMS201
Number of sheets: 2 Sheets
Difficulty: Moderate
Assembled Size: 2.93" x 1.56" x 1.17" (7.5 x 4 x 3 cm)
£9.99
Available from shops: Gloucester: 2, Stroud: 2
(Product Ref #81670)
This German tank was the most powerful tank in the world when it was introduced in August 1942. The 88mm gun was extremely powerful and the heavy armor made it almost impervious to attack. The success of the Tiger was so profound, that no allied tank dared to engage it in open combat. This psychological fear soon became to be known as "Tigerphobia".

Item#:
MMS203
Number of sheets: 2 Sheets
Difficulty: Moderate
Assembled Size: 2.85" x 1.76" x 1.17" (7.3 x 4.5 x 3 cm)
£9.99
Available from shops: Bristol: 3, Gloucester: 2, Stroud: 1
(Product Ref #96382)
The Sherman Tank was the primary tank used by the United States during World War II. The tank was named after Union General William Tecumseh Sherman. Production exceeded 50,000 units. Only the Soviet T-34 tank was produced in larger numbers during World War II. Though it was wholly inadequate against the heavier armed 56 ton German Tiger I and the 72 ton Tiger II, mobility, mechanical reliability and sheer numbers helped offset their disadvantages strategically.

Item#:
MMS204
Number of sheets: 2 Sheets
Difficulty: Moderate
Assembled Size: >2.89" x 1.37" x 1.33" (7.4 x 3.5 x 3.4 cm)

£9.99
Available from shops: Bristol: 5, Gloucester: 1
(Product Ref #96383)
Metal Earth R2-D2 Star Wars 3D Laser Cut Kit MMS250
Metal Earth Star Wars R2-D2 3D laser cut model kt.
Easy to assemble metal model kit, laser cut from thin steel sheet using tab and slot assembly.
£12.99
Available from shops: Bristol: 2, Cardiff: 2, Coventry: 2, Gloucester: 4
(Product Ref #28318)
Metal Earth Millenium Falcon Star Wars 3D Laser Cut Kit MMS251
Metal Earth Star Wars Millenium Falcon 3D laser cut model kt.
Easy to assemble metal model kit, laser cut from thin steel sheet using tab and slot assembly.
£12.99
Available from shops: Bristol: 3, Cardiff: 1, Coventry: 3, Gloucester: 1
(Product Ref #28320)
Metal Earth AT-AT Star Wars 3D Laser Cut Kit MMS252
Metal Earth Star Wars At-AT 3D laser cut model kt.
Easy to assemble metal model kit, laser cut from thin steel sheet using tab and slot assembly.
£12.99
Available from shops: Bristol: 2, Cardiff: 3, Coventry: 3, Gloucester: 3, Plymouth: 1
(Product Ref #39302)

Metal Earth Star Wars Darth Vader Tie Fighter 3D laser cut model kt.

Easy to assemble metal model kit, laser cut from thin steel sheet using tab and slot assembly.

£12.99
Available from shops: Bristol: 1, Coventry: 5, Gloucester: 2, Stroud: 1
(Product Ref #44808)
Metal Earth Star Wars Imperial Star Destroyer 3D laser cut model kt.

Easy to assemble metal model kit, laser cut from thin steel sheet using tab and slot assembly.
£11.99
Available from shops: Cardiff: 2, Coventry: 5, Gloucester: 3, Plymouth: 2, Stroud: 1
(Product Ref #83668)
Metal Earth Star Wars Destroyer Droid 3D laser cut model kt.

Easy to assemble metal model kit, laser cut from thin steel sheet using tab and slot assembly.
£11.99
Available from shops: Coventry: 1, Gloucester: 3, Stroud: 3
(Product Ref #83672)
Superior detail in these do it yourself (DIY) models begin as a 4 inch steel sheet and when completed create a fabulous 3D miniature model. Easy to follow printed instructions included in every package. Build your entire collection today! 
£11.99
Available from shops: Bristol: 1, Gloucester: 1
(Product Ref #83675)
£11.99
Available from shops: Bristol: 1, Cardiff: 2, Coventry: 1, Gloucester: 3, Stroud: 1
(Product Ref #83669)
When stationed on Hoth, the Rebel Alliance modified T-47 air speeders to become snowspeeders, fast flying conveyances for patrol and defense of their hidden base. It took some doing to keep the crippling cold from permanently grounding their air force, but Rebel ingenuity overcame the relentless Hoth elements. The T-47 air speeder is a small, wedge-shaped craft with two forward-facing laser cannons. In its rear arc is a harpoon gun fitted with a heavy-duty tow cable. The snowspeeder is a two-man vessel, with a pilot and rear-facing tail gunner. Superior detail in these do it yourself (DIY) models begin as a 4 inch steel sheet and when completed create a fabulous 3D miniature model. Easy to follow printed instructions included in every package. Build your entire collection today! Difficulty: Moderate Build Size: Approx 1.25" x 3.25" x 3.00" (3.17 x 8.25 x 7.62 cm) 
£12.99
Available from shops: Cardiff: 1, Gloucester: 1, Plymouth: 1
(Product Ref #86875)
£12.99
Available from shops: Bristol: 1, Cardiff: 1, Coventry: 2, Gloucester: 2, Plymouth: 1, Stroud: 1
(Product Ref #76411)
The deadly Slave I was infamous for its association with Jango Fett, a bounty hunter in Mandalorian armor. Fett packed the craft with weapons, from laser cannons and projectile launchers to seismic charges. After Jango's death, Boba Fett refitted Slave I and made it his own. A generation after his father's death, the distinctive craft remained the last thing fugitives wanted to see on their scanners. Superior detail in these do it yourself (DIY) models begin as a 4 inch steel sheet and when completed create a fabulous 3D miniature model. Easy to follow printed instructions included in every package. Build your entire collection today! Difficulty: Moderate
£12.99
Available from shops: Cardiff: 2, Gloucester: 1
(Product Ref #94480)
While not as imposing as its larger AT-AT walker cousin, the AT-ST nonetheless served as a significant addition to the Imperial side of battlefields in the Galactic Civil War. The two-man craft is lightly armed with chin-mounted laser cannons, and side-mounted weapon pods. The two-legged transport, dubbed the scout walker by many, serves as a reconnaissance and patrol vehicle, often flanking approaching AT-ATs and mopping up infantry that sneaks past the larger walkers. The Imperials used AT-STs in both the Battle of Hoth and the Battle of Endor. Superior detail in these do it yourself (DIY) models begin as a 4 inch steel sheet and when completed create a fabulous 3D miniature model. Easy to follow printed instructions included in every package. Build your entire collection today! Difficulty: Moderate 
£12.99
Available from shops: Cardiff: 3, Gloucester: 2
(Product Ref #76416)
£12.99
Available from shops: Bristol: 2, Coventry: 4, Gloucester: 3, Plymouth: 1, Stroud: 2
(Product Ref #73893)
£12.99
Available from shops: Coventry: 5
(Product Ref #99029)
Superior detail in these do it yourself (DIY) models begin as a 4 inch steel sheet and when completed create a fabulous 3D miniature model. Easy to follow printed instructions included in every package. Build your entire collection today
£12.99
Available from shops: Bristol: 2, Coventry: 6, Gloucester: 4, Plymouth: 1, Stroud: 2
(Product Ref #38679)
The Metal Earth® models are amazingly detailed etched models that engaging and fun to assemble. Each model starts out as a 4 inch square metal sheets. Simply pop out the pieces and follow the included assembly instructions to assemble your model. No glue, solder or special tools required.. Build your entire Star Wars collection today! 

£12.99
Available from shops: Coventry: 3, Gloucester: 1
(Product Ref #81552)
£11.99
Available from shops: Cardiff: 3, Gloucester: 6, Stroud: 2
(Product Ref #41492)
Metal Earth Rogue one K2SO Droid Star Wars 3D Laser Cut Kit MMS275
Metal Earth Star Wars Rogue one K2SO Droid 3D laser cut model kt.
Easy to assemble metal model kit, laser cut from thin steel sheet using tab and slot assembly.
£12.99
Available from shops: Bristol: 1, Cardiff: 2, Coventry: 2, Gloucester: 2, Plymouth: 2, Stroud: 1
(Product Ref #101783)
£11.99
Available from shops: Bristol: 1, Coventry: 2, Gloucester: 2, Stroud: 4
(Product Ref #71866)
£11.99
Available from shops: Bristol: 1, Cardiff: 2, Coventry: 4, Gloucester: 5, Stroud: 1
(Product Ref #71864)
£11.99
Available from shops: Bristol: 1, Cardiff: 2, Coventry: 5, Gloucester: 2, Stroud: 5
(Product Ref #71865)
The original Optimus Prime

 Each kit consists of remarkably detailed laser etching cut onto one or more four-inch square sheets of thin metal. Easy to follow printed instructions included in every package. Striking to look at, especially when placed to catch the light. Most Metal Earth models take an hour or so to assemble. When complete, they create a stunning 3D steel model that fits in the palm of your hand. Optimus Prime measures approximately 1.75 x 1.5 x 3.5 inches when finished. Please note: These models do not "transform" into other things. When complete, they are what you see here. Build your entire collection today!
£11.99
Available from shops: Coventry: 5, Gloucester: 1, Stroud: 2
(Product Ref #1000)
The original Bumblebee from the cartoons in 3D laser cut metal.
£11.99
Available from shops: Bristol: 2, Cardiff: 3, Coventry: 5, Gloucester: 2, Plymouth: 3, Stroud: 3
(Product Ref #1002)
Transformers Soundwave from the original cartoons in 3D laser cut metal.
£11.99
Available from shops: Bristol: 1, Cardiff: 1, Coventry: 5, Gloucester: 2, Plymouth: 2
(Product Ref #100)
Superior detail in these do it yourself (DIY) models begin as a 4 inch steel sheet and when completed create a fabulous 3D miniature model. Easy to follow printed instructions included in every package. Build your entire collection today! 
£11.99
Available from shops: Bristol: 1, Cardiff: 1, Coventry: 5, Gloucester: 2, Plymouth: 1, Stroud: 2
(Product Ref #1001)
The 1966 Batmobile from the live action television show began life as a Ford concept car called the Lincoln Futura. The body of the Futura was fabricated by Ghia of Italy, whose artisans hammered the car's panels over logs and tree stumps carved as forms to create the sleek manta ray-like car. The extra-large bat-trunk in the Batmobile holds various crime-fighting equipment and has plenty of space to fit eight people comfortably. The windshield is bulletproof. And of course, the Batmobile is not without its helpful gadgets including the nose-mounted chain slicer, lasers, rockets, an on-board telephone, radar, dash monitor, on-board computer, and police beacon, among others. 
£11.99
Available from shops: Bristol: 1, Cardiff: 5, Coventry: 5, Gloucester: 1, Stroud: 2
(Product Ref #50991)
The Batmobile is the Batman's primary mode of transportation. The vehicle is one of the most daunting components in his vast arsenal, keeping it stored in the Batcave when not in use. Affectionately dubbed the "Keaton-mobile" after Michael Keaton; the actor playing Batman/Bruce Wayne in the films at the time, the car's popularity with fans has established a strong following and easily ranks with the 1966 Batmobile as one of the most popular Batmobiles of all time. 
£11.99
Available from shops: Cardiff: 5, Coventry: 3, Gloucester: 1
(Product Ref #53237)
The Batwing was Batman's custom-built air combat vehicle. The craft was fully armed with miniguns and missiles. It is unknown where the vehicle was stored, but it was presumably kept somewhere near the grounds of Wayne Manor or in the Batcave. Although the notion of Batman possessing and flying a Bat-themed aircraft has been around in comics since 1939, the Batman 1989 film first introduced the classification of "Batwing". The movie's Batwing was also the first of any Bat-aircraft to be physically shaped after the bat-emblem to such a degree
£11.99
Available from shops: Bristol: 1, Cardiff: 1, Coventry: 5, Gloucester: 1
(Product Ref #55209)
The Bat-Signal is a distress signal device appearing in the various interpretations of the Batman mythos. It is a specially modified searchlight with a stylized symbol of a bat attached to the light so that it projects a large Bat emblem on the sky or buildings of Gotham City. In the stories, the signal is used by the Gotham City Police Department as a method of contacting and summoning Batman to their assistance in the event of a serious crisis and as a weapon of psychological intimidation to the numerous villains of Gotham City
£11.99
Available from shops: Cardiff: 3, Coventry: 5, Gloucester: 1
(Product Ref #53232)
£11.99
Available from shops: Bristol: 1, Cardiff: 4, Coventry: 5, Gloucester: 2
(Product Ref #55198)
£19.99
Available from shops: Cardiff: 5, Gloucester: 2
(Product Ref #52393)
£9.99
Available from shops: Cardiff: 4, Gloucester: 2
(Product Ref #47879)
HOGWARTS EXPRESS: Transports students to the Hogwarts Castle 
£19.99
Available from shops: Bristol: 1, Cardiff: 4, Coventry: 2, Gloucester: 2, Plymouth: 2, Stroud: 1
(Product Ref #101785)
HAGRID'S HUT: Services as the home to Rubeus Hagrid during his years as gatekeeper and teaching at Hogwarts School of Witchcraft and Wizardry. 
£16.99
Available from shops: Bristol: 1, Cardiff: 6, Coventry: 2, Gloucester: 2, Plymouth: 2, Stroud: 1
(Product Ref #101787)
GOLDEN SNITCH: Often called the Snitch, is the third and smallest ball used in Quidditch. It flies around the Quidditch field at high speeds. The Snitch Snatcher, or Seeker as they are called, objective is to catch the Golden Snitch and wins Quidditch match. 
£16.99
Available from shops: Bristol: 2, Cardiff: 5, Coventry: 2, Gloucester: 1, Plymouth: 1
(Product Ref #101788)
HAGRID'S HUT: Services as the home to Rubeus Hagrid during his years as gatekeeper and teaching at Hogwarts School of Witchcraft and Wizardry. 
£16.99
Available from shops: Cardiff: 5, Coventry: 2, Gloucester: 1
(Product Ref #101789)
Located on the Champ de Mars in Paris, the Eiffel Tower has become a global icon of France and one of the most recognizable structures in the world. Named after its designer, engineer Gustave Eiffel, the tower was built as the entrance arch to the 1889 World’s Fair and stands at 1,063 feet tall. It was the tallest man-made structure in the world until the Chrysler Building was built in 1930.

Item#: ICX011
Number of sheets: 1 Sheet
Difficulty: Easy
Assembled Size:

6"H x 2" x 2"

£12.99
Pre-Order (Website:0)
(Product Ref #97529)
£6.99
Pre-Order (Website:0)
(Product Ref #71880)
British four-engine heavy bomber used by the RAF in World War II. It became the most successful night time bomber of the war and flew 156,000 sorties. The bomber gained additional distinction for carrying the famous Upkeep "Bouncing bomb" for Operation Chastise in attacks on dams in the Ruhr Valley.

Item#:
MMS067
Number of sheets: 1 Sheet
Difficulty: Easy
Assembled Size:

5.15" x 3.43" x 1.01" (13.2 x 8.8 x 2.6 cm)

£6.99
Pre-Order (Website:0)
(Product Ref #96372)

Superior detail in these do it yourself (DIY) models begin as a 4 inch steel sheet and when completed create a fabulous 3D miniature model. Easy to follow printed instructions included in every package. Build your entire collection today! 

£9.99
Pre-Order (Website:0)
(Product Ref #8164)
A merry-go-round, is an amusement ride consisting of a rotating circular platform with seats for riders. The "seats" are traditionally in the form of rows of wooden horses or other animals mounted on posts, many of which are moved up and down by gearwork to simulate galloping, to the accompaniment of looped circus music

Item#: MMS089
Number of sheets: 2 Sheets
Difficulty: Moderate
Assembled Size: 2.5" x 2.5" x 2"
£9.99
Pre-Order (Website:0)
(Product Ref #43829)
Have a question? Contact us
Your browser is out-of-date!

Update your browser to view this website correctly. Update my browser now

×